DRYCONN 10600 Direct Bury Silicone Wire Connection Instructions
- June 13, 2024
- DRYCONN
Table of Contents
Filled Connectors for Direct Bury Use
10600 Direct Bury Silicone Wire Connection
Instructions
INSTALLATION INSTRUCTIONS
IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.
- Strip wires 5/8” (15.9mm).
- Align any frayed strands or conductors.
- Pre-twisting unnecessary. Place stripped wires together with ends of insulation even.
- Twist connector onto wires pushing firmly until hand-tight. Do not over torque.
- Wipe sealant in and around conductors and connector opening while tightening. Do not reuse.
*Large Direct Bury Waterproof Connectors**
| Catalog # | Selling Unit |
|---|---|
| 10600 | Card of 2 |
| 10666 | Bag of 10 |
| 10670 | Box of 100 |
PRODUCT SPECIFICATIONS & MEASUREMENTS
Max. Voltage: 600V max. building wire (1000V max. signs or luminaires)
Connector Size: 2” x 13/16”
Wire Type: Copper/Copper
Wire Range: Min #22/Max #8
Temperature Rating: 105°C (221°F)
UL Designation: MDB
Measurements (Inches):
A – 2.00
B – 0.81
C – 0.62
UL Listed as a Sealed Wire Connector. For use in dry, damp, wet locations
below or above grade when used in an enclosure.
*For use in direct bury applications when operating at 30 volts or less.
NEC Required for Outdoor Connections
Selected 600V Wire Combinations
For use with solid and/or stranded combinations.
| 1-3 #10 | 1 #10 w/1-3 #14 | 1 #14 w/3-4 #18 |
|---|---|---|
| 1-4 #12 | 1 #10 w/1-5 #16 | 2 #14 w/2-4 #16 |
| 2-5 #14 | 1 #12 w/1-4 #14 or #16 | 1 #8 w/1 #12 |
| 4-6 #16 | 1 #12 w/2-4 #18 | 5 #14 w/1 #18 |
| 3 #14 w/1-2 #16, #18, #20 or #22 | 2 #12 w/1-2 #14, #16 or #18 | 1 #8 w/1-2 #16, |
18, #20 or #22
Contact factory for a complete list of wire combinations at 800.633.0232.
50100-04 REV K 06/23
MADE IN USA
www.kinginnovation.com
(P) 800.633.0232
(F) 636.519.5410