O2 FLOW FB02 C1 Nail Salon Air Purifier Owner’s Manual
- June 13, 2024
- O2 FLOW
Table of Contents
O2 FLOW FB02 C1 Nail Salon Air Purifier
Introduction
Thank you for your choice. 02 FLOW air purifier. Read all of these operating instructions carefully before starting to use the air purifier. This will help you better operate the product.
Gentle reminder
Air purifier for improving indoor air quality has a significant role but to thoroughly cure indoor air pollution problems, and please keep in mind the four major points:
- 02 FLOW air purifier can significantly improve indoor air quality.
- However, to reduce or eliminate indoor air pollution sources is the most effective control way for indoor air quality.
- In order to bring you a clean and healthy air environment, we suggest that 24 hours a day running 02 FLOW air purifier, continuous, uninterrupted fresh air output.
- When people breathe, carbon dioxide is produced, so the proper ventilation can replace air from the outside, and add oxygen to reduce carbon dioxide inhalation.
- Please be sure to replace the filter according to the suggested time, to ensure that your 02 FLOW air purifier is always in the best working state.
Notice:
02 FLOW air purifier is commercial appliances, before your first use, please be sure to read the following safety instructions, in order to reduce the risk of electric shock, fire or injury!
- This product is only used indoors under normal conditions;
- Do not use this product in wet and high temperature environment (such as bathroom);
- It is forbidden to insert any objects into openings on the device. If there is this situation, please stop the machine, cut off the power and remove the foreign body.
- If need to repair please contact 02 Flow customer service center or local service providers;
- Before insert the plug, please carefully check the machine is equipped with the filter;
- When replace the filter or cleaning the machine surface, be sure to disconnect the power supply;
- Please do not use the non 02 Flow designated filter and other accessories;
- In addition to replace the filter, do not disassemble or modify the product;
- Do not sit, stand or prevent the heavy load on the air purifier;
- Do not let children use or operate the machine, to avoid unnecessary injure;
- Please unplug the device after every use, in case of the insulation caused by aging caused electric shock or fire;
- Do not operate the device in the highly flammable material area;
- Never submerge the device in water or other liquids, do not clean it under running water, to avoid electric shock or fire;
- Before the product is switched on, first confirm the marked voltage is consistent with the local voltage;
- Do not knock the product with hard objects(especially the air inlet and outlet);
- Please disconnect the power before cleaning the product;
- Do not before closing the machine, pull off the power source!
Use instrucions
Before you use the 02 FLOW air purifier, please refer to the operating instructions. Open the two side-panels and remove the filters:
- Open the panels of two side.
- Remove all filters inside the product.
- Remove all the packages from the filters.
- Replace the new filters as the picture .
- Put back the pre-filters.
- Put back the side-panels.
- Please put the power cord completely, put the 02 FLOW air purifier in a dry and flat place.
- To ensure that the air purifier from the wall or object at least 40 cm. In order to better realize the whole.
- space of the circulation of gas flow, otherwise it will reduce the air purifier purification efficiency; (Please check the power cord is intact, once damaged prohibit to use)
- Confirm that the power plug is inserted in three and has a grounding end, and then connected to the power supply.
- Touch upper right “on/off” button
- [Di] the sound, “on/off”AUTO “ANION'”air quality detection” indicators will light, air purifier start intelligent function.
- The fan operates at a moderate speed,”ANION” function opening.
- Air quality detection system is turned on and the front of the machine “air quality indicator lights” flashing green lights to display.
- After five minutes the air quality detection system will be complete the detection. Indoor air quality status is indicated by the “air quality indicator” green, yellow and red color.
- The automatic operation mode of the machine , clean air.
Operation instruction
How to maintenance the air purifier
- 02 FLOW air purifier with filter replacement reminder function:
- (Notice: When you move, clean and replace the filters, be sure to disconnect the power supply.)
- When the purifier indicator panel on the “reset filter” flashing lights, you need to replace the filter.
- Press “on/off” key to turn off the machine, unplug the power plug .
- Open the panels of two side.
- Take out the initial filter , pull out complex filter of filter online auxiliary handle, and then remove the complex filter.
- Put the new complex filter in the direction of the arrow to return to the product internally.
- Put back the pre-filters.
- Put back the side-panels
- Connect power and start the purifier, press “Reset filter” key 5 seconds, “Reset filter” indicator stop flashing. Complete filter replacement.
Follow us:
- @joyamiaofficial
- #joyamiaofficial
- TOLL FREE:866-398-9051 www.JOYAMIA.com
- Distributed by Forward Beauty Inc 21011 Itasca Street Suite E, Chatsworth, CA 91311
Documents / Resources
| O2
FLOW FB02 C1 Nail Salon Air
Purifier
[pdf] Owner's Manual
FB02 C1 Nail Salon Air Purifier, FB02 C1, Nail Salon Air Purifier, Salon Air
Purifier, Air Purifier, Purifier
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>