i-PRO WV-QAT502-W Gangbox Adapter Instruction Manual

: June 13, 2024
: i-PRO

Table of Contents

Operating Instructions
Specifications
Precautions
Standard accessories
Precautions for installation
Installation
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

**i-PRO WV-QAT502-W Gangbox Adapter Instruction Manual

**

Operating Instructions

Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
Be sure to read “Precautions” in this document before use.
The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.

For U.S. and Canada:
i-PRO Americas Inc.
For Europe and other countries:
i-PRO EMEA B.V.
https://www.i-pro.com/

Preface

This product is used when installing a compact dome type camera using a Gangbox/Junction box. For the latest information about the supported cameras, refer to our support website (https://i-pro.com/global/en/surveillance/training_support/support/technical_information ).

Specifications

Ambient operating temperature: –50 °C to +60 °C {–58 °F to +140 °F}
Dimensions: ø162 mm × 6.2 mm (H) {ø6-3/8 inches × 1/4 inches (H)}
Mass: Approx. 144 g {0.32 lbs}
Finish: Aluminum die cast WV-QAT502-W : i-PRO white
WV-QAT502-G : Light gray

Precautions

Refer installation work to the dealer. Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
Install the product securely on a Gangbox/Junction box in accordance with the installation instructions. Failure to observe this may cause injury or accidents.
Do not use this product except with suitable cameras. Failure to observe this may cause a drop resulting in injury or accidents.
Do not install this product on a place that is greatly influenced by wind. Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall of the product resulting in injury or accidents.
The screws and bolts must be tightened to the specified torque. Failure to observe this may cause a drop resulting in injury or accidents.

When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.

Caution:

Before attempting to connect or operate this product, please read these instructions carefully.
Notice:
This product is not suitable for use in locations where children are likely to be present.
Do not install this product in locations where ordinary persons can easily reach.
For information about screws and other parts required for installation, refer to the corresponding section of this document.

Standard accessories

Operating Instructions (this document): 1 pc.
Camera fixing screws: 2 pcs. (M4 ×
8 mm {5/16 inches})
Screw caps: 2 pcs.
Fixing screws: 5 pcs.
(M4 × 8 mm {5/16 inches}) (of them, 1 for spare)

Precautions for installation

In order to prevent injury, the product must be securely mounted to a Gangbox/ Junction box according to installation guide.
Make sure to remove this product if it will no longer be used.

Note:

When installing outside, installation work shall be such that there is no exposure to water into the architecture through the Gangbox/Junction box or conduits having been joined.

Installation example