i-PRO WV-QCA500A Ethernet Extension Cable Instruction Manual

i-PRO WV-QCA500A Ethernet Extension Cable

Product Information

The product is an Ethernet extension cable with a waterproofing grommet. It is designed to replace a past model that uses a waterproof connector on an outdoor camera. The cable is compatible with RJ45 network connectors and is powered by PoE (IEEE802.3af
compliant). The product has the following specifications:

• Power source: PoE
• Ambient operating humidity: 10% to 100% (no condensation)
• Storage temperature:
• Storage humidity: 10% to 95% (no condensation)
• Network: 10BASE-T / 100BASE-TX / RJ45 connector
• Mass: Approx. 35 g {0.08 lbs}

Product Usage Instructions

Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use. The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.
Make sure to also read the Operating Instructions for the camera you are using.
For U.S. and Canada support, visit i-PRO Americas Inc..
For Europe and other countries support, visit i-PRO Co., Ltd. Fukuoka, Japan or i-PRO EMEA B.V. UK Branch

Precaution:

• Do not attempt to disassemble or modify this product. Failure to observe this may cause fire or electric shock. Consult the dealer for repair or inspections.
• Refer installation work to the dealer. Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
• Turn the power off when doing wiring of this product. Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire.
• Correctly perform all wiring. Short circuits in the wiring or incorrect wiring may cause fire or electrical shock.

Installation

This product is used when attaching outdoor type network cameras using waterproof connectors. The outdoor dome type camera is used as an example when describing attachment procedures in these instructions.

Operating Instructions

RJ45 Ethernet Cable For professional use only.

Model No.

• WV-QCA500A (1 pc.)
• WV-QCA500APK (10 pcs.)

1. Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
2. The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.
3. Also read the Operating Instructions for the camera you are using.

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation

Preface

This product is an Ethernet extension cable with a waterproofing grommet. By using an RJ45 waterproof jack to convert the RJ45 network connector on an outdoor camera, it is possible to easily replace a past model that uses a waterproof connector.
For the latest information about the supported cameras, refer to our support website (https://i-pro.com/global/en/surveillance/training_support/support/technical_information