Samcom FPCN10A Rechargeable Long Range Operational Guide
- June 4, 2024
- SAMCOM
Table of Contents
Samcom
Samcom FPCN10A Rechargeable Long Range
Specifications Introduction
- DIMENSIONS: 8 x 1.5 x 11 inches
- WEIGHT: 6 pounds
- VOLTAGE: 25V
- NUMBER OF CHANNELS: 20
- BATTERY LIFE: 3000mAh
Walkie Talkie 6 Way Gang Charger with Reliable Performance and Quick Charging. Each slot has a clever LED indicator that lets you know how well the battery is charging. It is designed for the most convenient drop-in charging and can power both the batteries and walkie talkies simultaneously. Red indicates charging, green indicates complete charge.
Get Familiar with the transceiver
- PTT Transmitting
- MONI (monitor) button
- Scan/call button
- Antenna
- Channel selection knob
- Power/volume switch
- Speaker
- Microphone
- Status indicator
- Battery release button
- Earphone cap
- LCD Display
- Keys
- Battery
- Belt screw
Operation Guide
Menu Selecting List
- GRP (Group Channel) Setting After pressing MENU into function menu and GRP will be shown on display, press OK key then you can select 0-19 through by ▲or ▼, then press OK key again the new GRP channel is fix. Press the EXIT key to give up setting
- VOX Setting After pressing MENU into function menu and choice VOX, press OK key then you can select 1-9 and off through by or ▼ then press OK key again, press the EXIT key to give up setting. Level 9 small voice can open transmit.
- SQL (Squelch Level Selection) Setting After pressing MENU into function menu and choice SQL, press OK key then you can select 1-9 through by ▲or ▼, then press OK key again, press the EXIT key to give up setting
- BEP (Keypad Tone) Setting After pressing MENU into function menu and choice BEP, press OK key then you can select on/off through by ▲or ▼, then press OK key again press the EXIT key to give up setting
- CMP ( Voice Compression Function ) Setting After pressing MENU into function menu and choice CMP, press OK key then you can select on/off through by ▲or , then press OK key again press the EXIT key to give up setting
- SCA (Scrambler Function) Setting After pressing MENU into function menu and choice SCA, press OK key then you can select on/off through by ▲or ▼, then press OK key again press the EXIT key to give up setting
Monitoring
To monitor, you need just hold down the MONI button and adjust the channel background noise to a comfortable level by rotating the PWR/VOL knob. It can directly monitor the channel you care without having to wait for your call, as long as the MONI button has been hold down.
Transmitting
First of all, hold down the MONI button and listen for a while to confirm the channel you wanted is not busy, and then speak normally to the microphone at the front of the transceiver, while holding down the PTT button. The transmission indicator turns red when the PTT button is pressed. If you speaks too loud or with your mouth getting too close with the microphone, it may distort the sound and reduce the signal clarity on the receiving side. Release the PTT button to listen to the partner’s voices.
Receiving
Release PTT key, the transceiver enter the receiving mode, the status indicator lights green. Please adjust the volume appropriately to achieve the best listening effect.
Scanning
This feature is designed to catch signals on all channels. Press the scan/call button (press and hold for less than 2 seconds), the LED indicator flashes green, it will scan all the channels in the scan queue one by one in order. When a channel receives a signal, the LED indicator will turn green for long. When the function is activated, the transceiver will check whether there are calls on the channels that are set to be scanned. If a channel is tested to have signals on it, it will switch to this channel in order to receive voices (which channels can be scanned is programmed and set by Users).
Low Battery Warning
Low battery warning happens at the time when the battery needs charging or replacement. If the battery is low, the transceiver indicator light turns red and blinks, and a beep sound can be heard every 5 seconds. At this time, please replace the battery.
Voice Operating Transmitting (VOX)
This feature is designed to trigger the transmitting of voice by voice itself. Users can choose to turn on or off the VOX feature, and set the sensitivity of VOX through Menu. With this feature, transmitting operation is launched by the voice you said without having to press the PTT button. The transmitting operation stops as soon as the end of the talk.
Call function
Hold down the scan/call button for 2 seconds, the transceiver will send out a specific sub-tone that your companion transceiver will ring prompted a call.
Voice compression and expansion
This feature ensures the user in a variety of noisy environments can get a clear call. Set by the Users in the channel through Menu
Scrambler
This feature is voice encryption, user no such feature cannot receive the real voice, so makes your call be kept confidential. This feature may be set by Users in the channel through Menu
Frequently Asked Questions
What is the letter D on the screen between the channel and battery level?
In 2021, the frequency of the SAMCOM radios was changed. The frequency now comes in two versions for the FPCN10A radios. The most recent version is represented by the letter “D” on the display panel. The older SAMCOM radios are those without a letter or with a B letter.
Why does one of my radios have letter H after the channel and the other has a letter L?
You only need to let me know your Order ID. The FPCN30A/FWCN30A currently have the H/L mode feature, however the FPCN10A does not. Strong penetrating power between the construction zone is provided by SAMCOM FPCN30A with Selectable High Power Walkie Talkie (5W). Long use and battery life are preserved via Low Mode (2W).
How to change to high/low power mode?
Switch from “H” to “L” or vice versa on the screen (top left) by holding down the arrow up OR arrow down buttons on the radio keypad’s right side for a short period of time.
What kind of earpieces can you use?
The radios take a Kenwood connector. So any speaker mic or earpiece that has a Kenwood style connector will work.
Is it consist 9 units as one package?
Yes.
Do these come with earpiece?
Yes, each walkie talkie comes with earpiece.
Why do these radios need batteries if they can be charged?
They come with a rechargeable battery and charger.
Are there Bluetooth earpieces available for it?
No
Do you have USB charge cables for the car?
No, it doesn’t support USB charge.
Can the charger of these radios be plug to 220V AC?
Yes.
Will they connect with APX SERIES P25 Motorola radios?
Yes, by programming them to the same frequency.
Dose each radio come with its own charging dock?
Yes.
Do these radios require FCC licenses?
Walkie talkies that are powered by more than 2 watts must have an FCC license in order to function. Although different states may have different regulations, I advise you to check the FCC website or contact your local government before utilizing these radios.
What is the maximum talk distance?
Terrain, barriers, electromagnetic fields, etc. all have an impact on the talk range. In built-up settings, it often works great for communication distances of 0.5 to 2.0 miles, and up to 2 miles in open terrain.