SARNIA SA-SPHM Desk Mate SA-SPHM 4 in 1 Fast Wireless Charger with Digital Alarm Clock and Bluetooth Speaker User Manual
- June 13, 2024
- SARNIA
Table of Contents
SARNIA SA-SPHM Desk Mate SA-SPHM 4-in-1 Fast Wireless Charger with
Digital Alarm Clock and Bluetooth Speaker
- Qi® Certified Wireless
- Control Buttons
- Charger & Vanity Mirror 6. Halo Night Light Haptic
- Halo Night Light
- Sensor Dimmer
- Bluetooth® Speaker
- Digital Alarm Clock
- Smartphone Stand
- Type-C Port
Control Buttons
Function Overview
- Qi wireless charger
- Vanity mirror
- Halo night light
- Digital alarm clock
- Bluetooth® Wireless Speaker
Wireless Charging
Connect the Type-C end of the USB cable to the Type-C port [8] of the product and the other end to a power outlet. Once the product is charging, an LED indicator will flash. When fully charged, the LED indicator will stop flashing. Place the smartphone in the charging area [1]. The charging icon will light up once it is charging.
Night Light
- Short press [6]: ON/OFF night light
- Short press 6]: Adjust the brightness of the light
Set Digital Alarm Clock
Set Clock
- Press M: To set the hour, press # -] to decrease and
- Press [+ al to add an hour. To set the minutes, press again [M], to leave this mode long press M.
Set Alarm
- Press [M] three times: To set up ALARM1 (the icon of the respective ALARM will be flashing) to set the minutes, press [M]. Use the [* -] to decrease and
- press + a] to add hours/minutes. To set up Alarm 2.
- Press [M] again.
- Long press [M]: select ALARM 1, and press [+ a] to set up this alarm. To select ALARM 2, long press [M] again, and press [+ ta] to set up this alarm
- Once the alarms are set up, the alarm icon will light up. When the alarm rings, snooze for 5 min, by pressing the Night Light button [6]
- The alarm will automatically stop after 4 snoozes.
- To stop the alarm when it rings long press [+ a]. Set Hour Format
- Press [M] seven times: Change the 12/24 hour format, press [* -] or [+ ©).
Set Date
- Press [M] eight times: To set the year
- Press [M] nine times: To change the month, press
- [M again to set the day
Digital Clock Brightness
- Press [* -1: To adjust the brightness
- Bluetooth® Wireless Speaker
- Press [BT): To turn ON/OFF Bluetooth Mode
- Long press BTI: To switch between hour or date format
Pairing Devices
Once the Bluetooth® mode is activated, open your smartphone Bluetooth® options
and pair with “SA-SPHM”. When paired, Desk Mate will beep.
Speaker Control Buttons
- Press [1: To Play/Pause
- Long Press [ ]: To disconnect/connect
- Press [* -1: To reduce volume
- Press [+ ©): To increase volume
- Long Press [* -]: To play the last song
- Press [+ o]: To play the next song
FM mode
Press twice on [BT], enter FM mode, and long press [+ a] to the tuning
station.
Specifications
- Product Material: ABS + glass + cloth
- Power Input: DC 5V/2A
- Charging Efficiency: >75%
- Wireless Charging: 5W
- Battery Capacity: 300mAh
- Speaker Power: 3W
- Product Size: 151 x 151 × 71mm / 5.95 x 5.95 x 2.8 inches
- BT ID: D059694
- FCC ID: 2AANZSPHM
This product supports fast wireless charging, it follows Qi® wireless charging standards. With the use of 5V output adapter, wireless charging supports a 5W load, with the use of QC2.0 and above standards of the adapter, wireless charging supports a 10W load. With overvoltage and temperature protection.
Attention
- Avoid direct sunlight exposure or high temperatures for a long period.
- Do not disassemble or modify this product.
- Do not touch the AC adapter with wet hands.
- Please put this product away from water or other liquids
- If you want to clean this product, please disconnect the power supply.
- Working environment temperature range of products: 20-45
FCC Statement
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
WARNING: Cancer risk from Lead Exposure Company name: DGL Group, Ltd.
Address: 2045 Lincoln Highway, Edison, NJ 08817
www.aglusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>