VOLLMER 45712 Loco Control Station Instruction Manual
- June 13, 2024
- VOLLMER
Table of Contents
VOLLMER 45712 Loco Control Station Instruction Manual
Mounting instruction
Arrange the individual parts by letter groups, and then begin assembling in accordance with the drawings.
We use recyclable polystyrene.
Congratulations on your purchase of this Vollmer product. Our high quality kits will bring you much joy.
You will find various glues for the kits in the Vollmer product range.
Subject to change without prior notice.
No liability for mistakes and printing errors.
Mounting
A
B
C
D
E
**F
G
Tip:
To illuminate the model from inside, please use Viessmann item 6832 House
illumination socket with bulb E5,5, clear. For detailed illumination of each
window and room, please use Viessmann item 6005 House illumination starter
set.
See product information on the last page.
H
Illumination tip with approved Viessmann items**
The light boxes/light rails for indirect window illumination allow a completely new individual lighting of rooms/floors.
House illumination starter set: 6005
Starter set floor interior lighting: **6045
Board with one LED for house illumination:
6006 warmweiß, 10 Stück
warm-white, 10 pieces
6007 gelb, 10 Stück
yellow, 10 pieces
6008 weiß, 10 Stück
white, 10 pieces
LED with connection cable:
Board two for h : with LEDs ouse illumination
**6017 gelb, 10 Stück
yellow, 10 pieces
6018 weiß, 10 Stück
white, 10 pieces
6021 warmweiß, 10 Stück
warm-white, 10 pieces
-
Cut out curtain background motive.
-
Fix on the light box.
-
Draw the internal measurements on a cardboard minimum 1 mm depth required. Cut the window ground plot with cutter.
-
Same way outer frame of light box.
-
Fix the part on the curtain background.
-
Glue the light boxes onto the windows which are now equipped with glasses.
-
Here you see a window with and without embrasure.
-
Picture shows the better method using embrasure (left window).
Starter Set floor interior lights, item 6045
-
Cut out the background motive and fix into the light rail. Please take care for direction.
-
Glue the dividing walls to cover the light between windows and doors as well as for final end.
-
Filling parts to cover space between the LEDs, length can be cut accordingly.
-
The filling pieces and the LED plastic version are fixed exactly above windows and doors.
-
Glue the light rail behind the window line.
-
Nice result with depth effect.
Around the corner
- Light rails in 4 different heights for different window and door heights and scales. Can be cut as required,with notches.
- Dividing walls movable to cover the light between the windows, doors and finish.
- Filling parts to cover space between the LEDs to be cut as required, with notches.
- LED with plastic frame movable to exact position over the windows and doors. Suitable for light boxes from house illumination item 6005
More accessories
Power module
The ideal solution for stable and powerful switching current as well as bright an flicker- free LED-lighting.
Adapter pen for rail, 25 pieces 6044
To equip thin wires and litz wires to make them pluggable, e. g. in connection with item 6049 or item 5205.
**Plug-in rail for interior lighting on board, 12-pole 6049
The brilliant and useful 12-pole plug-in rail for interior lighting on board connects up to 12 power consumers – simply by jacks for plugging in the resistors. No extra plug, screw terminals or soldering required.
Power module with plug-in rail 5205
Only one item combines a power module and plug-in rail.
Viessmann
Modelltechnik GmbH Bahnhofstraße 2a
D -35116 Hatzfeld-Reddighausen info@viessmann-modell.com
P+ 49 6452 9340-0 www.viessmann-modell.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>