i-PRO WV-Q157E Inner Cover Instruction Manual
- June 13, 2024
- i-PRO
Table of Contents
i-PRO WV-Q157E Inner Cover Instruction Manual
Before attempting to connect or operate this product, please read these
instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Preface
This product is an inner cover that is exclusively designed to be used with
the network cameras. Refer to the catalog or the installation guide of the
camera for supported cameras.
This inner cover is a component to lower the reflection of the dome part of
the network camera.
Precautions
-
Refer installation work to the dealer.
Installation work requires skills and experiences.
Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer. -
Be sure to engage the inner cover onto the camera main body before installation of the camera main body.
Failure to observe this may cause a drop resulting in injury or accidents.
Installations
Be sure to read “Precautions” before installation.
How to engage the inner cover
Slide the covers located on the both lateral sides of the camera and put the
inner cover on the camera until the hooks inside the inner cover are engaged
in the holes of the camera (until a click is heard).
Important:
- Put the inner cover down on the camera until the outside cover of the camera cannot be seen from the opening (from which the camera lens is visible) of the inner cover. If this engagement work is not successfully performed, the inner cover may be removed or the hidden part at the top of the screen may become larger in the wide mode.
- When the inner cover with this product and an outdoor dome housing equipped is mounted, the clearance between this product and the housing shall be 2 mm or more.
How to remove the inner cover
- Press the inner cover from the front and rear sides inward (at the same vertical position as the hooks) to bend the cover and remove the inner cover from the camera.
Press from the front and rear sides inward to bend
Specifications
Standard Accessories
For U.S. and Canada:
i-PRO Americas Inc.
For Europe and other countries:
i-PRO EMEA B.V.
https://www.i-pro.com/
© i-PRO Co., Ltd. 2022
Ns1010-6042
3TR006656GZA
Printed in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>