Z4A20 C Heatbank Rechargeable Hand Warmer Instructions

HeatBank™6 Rechargeable Hand Warmer
Instructions
6: Model #24A20-C
English USA – en

Z4A20 C Heatbank Rechargeable Hand Warmer

Thank you for purchasing the Zippo® HeatBank 6 hand warmer (“Product’), ‘READ ALL WARNINGS AND INSTRUCTIONS before using your Product for the firstime. Improper uso of ths Product may resultn Product damage, excess heat, toxic umes, fire or explosion,for which damages you (Purchaser”) and N0t Zippo Manufacturing Company (Zippa’) are responsiole.
1 you v an probloms with o oporlo o your Product, retun itfo the retail store. Instead, consumers should contact their e ahastors o Zippo.com.
WARNING : Road al safoty warnings and instructions. Failure to folow the warmings and instructions may resultin electric shock, fire and/or serious injury. Save these insiructions for future reference.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

• Failure o follow all instructions may result n electric shock, fire and/or serious njury.

• The Procuct bateries are dasigned to work in temperalures between -4°F and 120°F (-20°C and 49°C). The Procuct can be damaged and battery ife shortened f stored or operated outside of these temperatures.
  DO NOT expose battery to intense heat or cispose in a fire as this may resultin an explosion.

• DONOT expose tointense sunliht o temperalures above 120°F (49°C).

• DONOT expose fo moisture or submerge in iquid.

• Not intended for children.
  Bo cauious of excossive drops, bumps, abrasions or otner impacts to this Product. ff there is any damage to the Product such as dents, punctures, ears, Geformities or corrosion, cue to any cause, discontinue use and dispase of it proper’y as outlined in the Sate Betfery Disposal section in his menual,

• DONOT disessemble this Product or atiempt o repai or modily itn any mannar.

•  DONOT attempt to charge Product using any method, apparatus or connection other than the included charging cable to avoid the potential for overheating, leaking, or explosion.

• the Product is excessively hot, is emitting odor, becomes deformed, damaged, or demonsirates abnormal operation, immediately Giscontinue use and contact Zippo.

• Fuly charge your Product prior to any extended storage.

• AWl batteries lose eneray from selr-Gischarge over fime, especilly at higher temperatures. When the Productis not i use, we recommend that the battery s charged at least every tree (3) months.
  IMPORTANT : Use only with Listed/Certifiec ITE Power Supply.

DISCLAIMER:
Zippo will not be responsible or liable for any Gamages you or any third party may suffer as a result of use or misuse of tis Product, T device complies with part 15 of the FCC Rules. Operation is subject to he following two conitions:

1. This device may not cause harmiul interference, and
2.  his device must accept any interference received, including inference that may cause undesired operation.

‘ NOTE : This equipment has been tested and found to comply with the limits or a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed 1o provide reasonable protection against harmful interference in & residential instalaton. Tis equipment generates, uses and can rediate radio frequency energy znd, f not nstalled and uset in accorcance with the instructions, may cause harmiul inerference 1o adio commurications.
Homever, there is no guarante that inerference vl ot occur in a paricuier instalaton. I ths equipmont does cause harmi iterforence to radio or television reception, which can be determined by tuning the equipment off and on, the user is éncouraged to ry to correct t nterference by one or more of the following measures

1. Reorient o relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that owhich the receiver is connected.
4. Consult the dealer or an experienced technician for help.

CAUTION : Any changes or modifications not expressly approved by Zippo could void the user’s autharity to cperate ihe equipment.

ONE YEAR LIMITED WARRANTY

Zippo Manufacturing Company warrants the Product against mnufacturing defects in material znd workmenship under norma use.
“This warranty does not cover, and Zippo shall have ro liability with tespect lo, damage, faiure or 0ss caused by or aftributable 1o abuse, accident, Misuse, Improper or abnormal use, naglect, Improper or unauthorized repair, failure to follow instructions provided by Zippo, or “acts of God” or other contingencies beyond the control of Zippo. This wartanty does not cover incidental or cansequential damages, although some states do not allow the exclusion or fimitation of incidental or consequential camages, so the above limitation or exclusion may ot apply o you Warranty coverage extends 1o the original purcheser and begins on the date of purchase and ends ono (1) year thereafter, Othor than as to the foregoing, this warranly i in iew of all other express and implied
wartanties. Any implied warranties which by law cannot be excluded are limited to this same period. Some states do not allow fimitations on how ong an implied warranty lasts, so the above Iimitztion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state o obtain proper instructions for service under this limited warranty, efer o repar Instructons at zippo.com o contact Zippo Consumor Relations at consumertelalions@zippo com or 1-688-442-1932. Do not return the Product to the retail store. f the Product is covered by the warranty, Zippo will repair or replace the item or il refund the purchas price. An aitempt to open the sealed partons o the Product case by user or any non-approved repair center will void this warranty.
NOTE : Proof of purchass s required for warranty service.
ZIPPO MANUFACTURING COMPANY
33 Barbour Street « Bradford, PA 16701 U.SA.

1. Main Body & Heating Surface (doth sides)
2. Power Button
3. Battery/Temperature Incicator Lights 3 Blug)
4. Large USB Port (OUTPUT to charge other devices)
5. Smal Micro USB Port (INPUT to recharge Product)
6. Charging Cable ~ Large USB end
7. Charging Cable — Small Micro USB end

OPERATING INSTRUCTIONS

Power Level Check
When powered OFF
Briefl tap POWER button ance and release. The BLUE lights wil indicate the power status.

• 3 lights indicate a full charge.
• 1 light ndicates a low charge and Product should be recharged When powered ON

BLUE lights will continuously indicate heat status (see above).
Temperature Mode
‘The product contains a heating element that heats around the main bady for continuous warmth.

To turn the Product ON:

• Press and hold POWER button for § secands to fur unit ON. The Product will povior0n i the LOW (SINGLE BLUE LIGHT) temperaturo stting

• Ezch press of the POWER bution willincecse the temperature sefting ons evel.
  1 light = LOW heat setiing.
  ~21ights = MEDIUM heat setting.
  — 31ights = HIGH heat setiing.

• Press POWER to cydle the Product through the following settings:
  — BLUE Lights: LOW (nifial stting) > MEDIUM > HIGH

• Repeatdly press POWER to oyclefo the next desired stting.

• Prolonged contact with skin wil reduce operating time and temperature.

TIP : To achieve meximum temperature, power ON the Product indoors before going outside. Powering ON outside in excessively cold or windy conditions may reduce performance.
TIP : To maximize operating time, it s recommended to use this Product within a clothing pocket. Operating time may b reduced when directly exposed to colder temperatures (outside of a pocket).

Powering OFF the Product
Press and hold POWER button for 5 seconds to tum unit OFF.
Lanyard Installation & Usage

‘Some Product configurations may include a neck Tanyard. I included, push the smal end of the fanyard thrsthe hole in the Product until contact with the piastic clp s made (Fig A).

• Feed the opposite larger end of the lanyard thru the smaller oop sticking out o form a self-tightening Toop (Fg B).
• Continuz feecing the lanyard thru unilonly the small diameter thread s touching the Procuct Fig C).
• Side toggle to back offanyard. Place lanyard around neck TIP: For optimum comfort, adjust the heigh of the Product on your body by adusting the togale. The toggle should be placed behind the rieck when worn correctly.

Recharging the Product
“The Product is shipped with a partial charge and MUST be fully charged before using the first time. Use ONLY the cherging cable proviced ith your Praduct to avaid the potential for overneating, lecking, or explosion. Follow the charging instructions below carefull.

• Plug the small Micro USB end of the charging cable (inciuded) nto the smell USB port. Piug the large USB end inlo a suitable charging device or Listed!Ceriiied ITE Povrer Supply. Charging will begin automaticaly.

• BLUE indicator Ights will bk to show the power level while charging:
  – 3lights indicate a full charge 1 light indicates a low charge

• Periodically inspect the condition of the charging cable. Do not attempt to charge the Product if the charging cable s damaged. Contact Zippo for replacement options if your cable has become worn or broken.

• After charging/recharging, disconnect the charging cable

• When disconnecting the cord, be sure to pull by plug rather than cord to reduce the risk of damage.
  ac charging cadie 0 dos ot becom enangled rbecamea suety aza

• Keep cherging cable aay from sharp edges.
  NOTE : When using a vehicles 12 volt DC accessory outlet as a charging source, be aware that some vehicles require you fo turn on the ignition to power the accessory oulet. Refer to your vehicie’s owner’s manual

Charging a Mobile Device

• Ensure that the mobil device is appropriatsfor use with tis Prodct
• Connect the large USB plug of the appropriate mobile device charging cable (not included) into the large USB port. The mabile device should begin to charge automaticall. The BLUE Product ight(s) will iluminate indicating power status. Upon removing the cable from the mobile device, the Product will awtomaticaly power OFF after zbout 10 seconds.

NOTE : While charging a mobile device, Product heat functions are disabled to prevent overneatiig. Remove device harging cable (ot included) to allow heat funclons T0 resume.

**** Safe Battery Disposal

• Never dispose of batteries in th garbage. Disposal of batteries in the.
  garbage is unlavrul in he United States, under state and federal environmental laws and regulations. This symbol indicates that the  equipment must NOT be thrown into general weste but should be fl  collected separately and properly recycled under local reguiations.
  All rechargeable batteries will degrade over time, eventually —  imiting the batiery’s abty to retain a charge. This Product contains a  lithium on rechargeable battery pack, which must be disposed of  propery when it will o longer etain a charge.

• For information on recycling this battery:
  ~Zippo Consumer Relations:
  Gall 1-838-442-1932 or visit vww.zippo.com.
  ~ Gontact local, county,or state recying centers for information on proper disposal

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>