LESOVI WT11 Wireless Remote Control Electric Horn Alarm User Manual
- June 13, 2024
- LESOVI
Table of Contents
Wireless Remote Control Electric Horn Alarm
User Manual
For the first use, please pair the electric horn with the remote control
Packing list
Electric horn parameters
Material| Batte III capacity| ‘Charging Imput| Decibel|
Standby time| Receiving frequency| Waterproof
---|---|---|---|---|---|---
ABS| 300mAh| 5V-0.2A| 120dB| >30Day| 433.92MHz| I P66
Battery capacity Charging -1 Imput p Standby Receiving time frequency Waterproof ABS 300 mAh 5V-0.2A 120dB >30Day 433.92MHz IP66
Remote control parameters
Material| Batte capacity| ‘Charging Imput| Decibel|
Standby time| Receiving frequency| Waterproof
---|---|---|---|---|---|---
ABS+PC| 60 mAh| 5V-0.2A| 50m| >30Day| 433.92MHz| I P66
Charging tips
Note : Before using for the first time, please fully charge the electric horn and remote control.
- Insert the charging cable into the Type-C port.
- Connect the cable USB side to the charger adapter.
During charging , the red light on; fully charged , the green light on.
- Single charge time is about 2.5 hours.
- Unplug the charging cable and cover the USB waterproof plug when charging finished.
Note: To avoid battery damage after use, the electric horn should be fully charged at least once a month.
How to install
Use Instructions
Turn on/off and pair code
-
The electric horn buttan is a touch switch, long press for 2 seconds 0 switch it.
Power-on : two beeps of “Didi”
Power-off : one beep of “Didi” -
Power on: click the power button, the electric hom will ring “Didi” sound to enter the pair code state; then press any button on the remote control, OiDi sound stop to complete the pair code.
Ring function
-
Press button 3 “;, the electric horn rings;
-
3 levels of volume adjustable;
Increase volume; click button);4decrease volume: click button’! 4 -
There are four ringtones :whistle, horn, alarm, beep; ‘Switch to the previous ringtone: bang press the button 2, switch to the next ringtone: long press the button 5
Anti- theft alam function
- Press button 2, electric horn emits a prompt sound to enter the pre-anming state, waiting 5 seconds, the efectric hom emits a prompt sound agaan, then enter the anti-theft arming state; During vibration or shaking, the electric hom wit keep emitting alarm sounds ;Press the button ‘1 to release the anti-theft arming state, and electic horn emits prompt sound at the same time,
- Three-tevel anti-theft alarming sensitivity adjustment , During pre-atarming state, click the button @!to increase the alarming sensitivity, and click the button 3) to decrease the alarming sensitivity; the sensitivity bevet of electric hom has a corresponding prompt sound; ‘The first level of sensitivity: one beep, the second tevel : two beeps of “didi®, the third tevel : three beeps of *dididi”; ‘The third bevel has the highest sensitivity, and the first level is lowest;
Warning
- Once off the bike, keep the remote control with you;
- If the remote control does not work to the horn or the distance becomes shorter, please check whether the battery power is sufficient, whether interference in the surrounding , try again in another place;
- Please Check if charging cable is good before charging;
- Please press carefully after charging, make sure the waterproof plug is flush with the main surface of the horn;
- Do not use sharp objects to press the button of remote control;
- Do not use it for children without adult supervision;
- Do not use it in closed spaces or in the crowded, so as not to cause trouble to others;
- Please keep this product away from fire and hot objects;
MADE IN CHAINA
Documents / Resources
|
LESOVI WT11 Wireless Remote Control Electric Horn
Alarm
[pdf] User Manual
WT11, 2BCQC-WT11, 2BCQCWT11, WT11 Wireless Remote Control Electric Horn Alarm,
Wireless Remote Control Electric Horn Alarm, Remote Control Electric Horn
Alarm, Electric Horn Alarm, Horn Alarm, Alarm
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>