velleman KSR10-USBN Interface For Robotic Arm User Manual
- June 13, 2024
- Velleman
Table of Contents
velleman KSR10-USBN Interface For Robotic Arm
Product Information
The KSR10/USBN is a robot arm device manufactured by Velleman.
It is designed for users aged 14 and above. The device should be protected
from rain, moisture, splashing and dripping liquids, shocks and abuse, extreme
heat, and dust.
The device comes with a user manual that provides detailed instructions for
installation and usage.
System Requirements
The KSR10/USBN requires a PC with the following specifications:
- Operating System: Compatible with Windows, Mac, and Linux
- USB Port : Available USB port for connecting the robot arm
Installation
To install the KSR10/USBN robot arm, follow these steps:
- Download the software from the product page on the Velleman website (www.velleman.eu > Downloads > Software).
- Physically connect the robot arm to your PC using a USB cable.
- Switch on the robot arm.
- Open the software on your PC.
Usage Instructions
To use the KSR10/USBN robot arm, follow these instructions:
- To move the robot arm, press the corresponding key on your keyboard or click the corresponding key on the screen.
- To create a manoeuvre sequence, click the recording button on the bottom of the screen and press the corresponding key on your keyboard.
- To edit the sequence, press the edit button.
- To save the sequence, press the save button.
- If there is no USB connection, an error message will appear.
- Re-connect the robot arm, check the USB cable, or replace the batteries.
Please note that any user modifications to the device are not covered by the warranty. For more information and the latest version of the user manual, visit the Velleman website ( www.velleman.eu).
Introduction
- To all residents of the European Union
- Important environmental information about this product
- This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
- If in doubt, contact your local waste disposal authorities.
- Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
Safety Instructions
- Read and understand this manual and all safety signs before using this appliance.
- Choking hazard due to small parts. Not for children under 3 years.
- Recommended age: 14+.
- Protect from rain, moisture, splashing and dripping liquids, shocks and abuse, extreme heat, and dust.
General Guidelines
- Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
- All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
- Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
- Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
- Nor Velleman Group nv nor its dealers can be held responsible for any damage (extraordinary, incidental or indirect) – of any nature (financial, physical…) arising from the possession, use or failure of this product.
- Keep this manual for future reference.
System Requirements
- free USB 2.0 port
- Windows® 8.1 or higher
Installation
- Download and install the software. To do so, go to the product page on www.velleman.eu > Downloads > Software.
- Physically connect the robot arm to your PC using a USB cable. Switch on the robot arm.
- Open the software.
- You can now move the robot arm by pressing the corresponding key on your keyboard or by clicking the corresponding key on the screen.
- You can also write a manoeuvre sequence. To do so, click the recording button on the bottom of the screen and press the corresponding key on your keyboard.
- Press the edit button to edit the sequence.
- Press the save button to save the sequence.
- If there is no USB connection, an error message will appear. Re-connect the robot arm, check the USB cable or replace the batteries.
- Use this device with original accessories only. Velleman Group nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device.
- For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
- The copyright to this manual is owned by Velleman Group nv. All worldwide rights reserved.
- No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.
Velleman® Service and Quality Warranty
- Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.
- All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).
General Warranty Conditions Concerning Consumer Products (for EU):
- All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
- Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.
- You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
Not covered by warranty:
- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
- consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.
- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
- damage resulting from an inappropriate packing and shipping of the article;
- all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
- Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
- Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
- Repairs occurring after warranty expiration are subject to shipping costs.
- The above conditions are without prejudice to all commercial warranties. The above enumeration is subject to modification according to the article (see article’s manual).
- Made in PRC
- Imported by Velleman Group nv Legen Heirweg 33, 9890 Gavere, Belgiumwww.velleman.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>