HLIVI 6-ARM Side Brushes Vacuum Cleaner Instruction Manual
- June 4, 2024
- HLIVI
Table of Contents
6-ARM Side Brushes Vacuum Cleaner
Instruction Manual
INCLUDES
2x Sets of Side Brushes
INSTRUCTIONS
- Make sure HUVI is switched off.
- Gently but firmly remove the old brushes (Fig. A) , then dispose of the old brushes.
- Attach the new side brushes by pressing the brush into each slot until it clicks. Make sure to match the letter on the brush with the letter on HUVI (Fig. B).
CARE & CLEANING
- Remove the side brushes from HUVI.
- Carefully remove any debris wrapped between the main unit and the side brushes.
- Use a cloth dampened with warm water to remove any dust from the brushes or to gently reshape them.
- Allow the brushes to fully dry before reattaching.
CONTACT US:
If you have any questions or concerns or are unhappy with your product, please
reach out to us at SERVICE@KALORIK.COM, or by
phone at our toll-free number: +1 888-KALORIK.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>