Sound Control Technologies RC5-URM Multiple Camera User Guide
- June 13, 2024
- Sound Control Technologies
Table of Contents
Sound Control Technologies RC5-URM Multiple Camera
Product Information
- Product Name: RC5-URMTM
- Supported Camera Models: ClearOne Unite 200
- Accessories:
- RCC-C001-0.3M HDMI to HDMI Video Cable
- RCC-C002-0.4M RJ45 to RJ45 UTP Control Cable
- RC5-CETM
- PPC-004-0.4M DC Power Cable
- RCC-H001-1.0M HDMI to HDMI Video Cable
- HDMI/DVI Device
- RCC-H016-1.0M RJ45 to RJ45 UTP Control Cable
- Generic Control Device
- RC5-HETM
- SCTLinkTM Cable Power, Control & Video:
- SCTLinkTM cable must always be a single, point-to-point CAT cable with no couplers or interconnections.
- SCTLinkTM Cable Specs:
- Integrator-Supplied CAT5e/CAT6 STP/UTP Cable T568A or T568B (10m-100m min/ max length)
- RJ45 Pinout:
- Pin 1 – 12345678
- Module Dimensions:
- RC5-CETM: H: 0.93″ (23mm) x W: 2.5″ (63mm) x D: 3.741″ (95mm)
- RC5-HETM: H: 1.504″ (38mm) x W: 3.813″ (96mm) x D: 3.617″ (91mm)
- Power Supply: PS-1230VDC 100-240V 47-63Hz
Product Usage Instructions
To use the RC5-URMTM, please follow the steps below:
- Connect the ClearOne Unite 200 camera model to the RC5-URMTM using the appropriate cables:
- Use the RCC-C001-0.3M HDMI to HDMI Video Cable to connect the camera to the RC5-URMTM for video transmission.
- Use the RCC-C002-0.4M RJ45 to RJ45 UTP Control Cable to establish control communication between the camera and the RC5-URMTM.
- If using other camera models, refer to the specific cable requirements mentioned in the user manual.
- Ensure that the RC5-CETM or RC5-HETM module is properly connected to the RC5-URMTM.
- For RC5-CETM, connect the module using the PPC-004-0.4M DC Power Cable.
- For RC5-HETM, no additional power cable is required as it is powered through the SCTLinkTM cable.
- If using an HDMI/DVI device, connect it to the RC5-URMTM using the RCC-H001-1.0M HDMI to HDMI Video Cable.
- If using a generic control device, connect it to the RC5-URMTM using the RCC-H016-1.0M RJ45 to RJ45 UTP Control Cable.
- Ensure that the SCTLinkTM cable is a single, point-to-point CAT cable without any couplers or interconnections. Use the integrator-supplied CAT5e/CAT6 STP/UTP cable with T568A or T568B pinout.
- Connect the power supply (PS-1230VDC 100-240V 47-63Hz) to the RC5-URMTM to provide power.
Please refer to the user manual for detailed instructions and troubleshooting information.
WIRING DIAGRAM
The RCS-URM'” supports multiple camera models:
- ClearOne Unite 200
- Lumens VC-TRl
- MaxHub UC P20
- Minrray UV570
- VHD VXll0
- VHD VX710N
- VHD VX701L
- VHD VX120
Module Dimensions
- RCS-CE'”: H: 0.93″ (23mm) x W: 2.5″ (63mm) x D: 3.747″ (95mm)
- RCS-HE™: H: 7.504″ (38mm) x W: 3.873″ (96mm) x D: 3.677″ (97mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>