Sound Control Technologies RCF1-CW4 Camera Extension Kit User Guide
- June 13, 2024
- Sound Control Technologies
Table of Contents
Sound Control Technologies RCF1-CW4 Camera Extension
Product Information
The product is a Cisco Webex PTZ 4K camera, which is designed for high-quality video conferencing and collaboration. It comes with various cables and accessories for connectivity and power supply.
- Cisco Webex PTZ 4K: A high-definition camera for video conferencing
- RCC-C001-0.3M HDMI to HDMI Cable: A 0.3-meter HDMI cable for connecting the camera to HDMI devices
- RCC-C002-0.3M RJ45 to RJ45 UTP Cable: A 0.3-meter RJ45 cable for Ethernet connectivity
- PPC-018-0.4M 4Pin Mini Din to 5.5×2.5mm Barrel Cable: A 0.4-meter cable for power supply
- W PS-19-12V8A 100-240V 47-63Hz Power Supply: A power supply module with the dimensions of 8.25W x 1.25H x 4.25D
- RemoteCamFiberTM RCF1-CW 4TM Application Guide: A guide for using the RemoteCamFiberTM RCF1-CW 4TM
- Cisco SX80, Codec Plus & Codec Pro: Compatible codecs for the camera
- RCF1-HETM: A transmitter with the dimensions of 8.25W x 1.75H x 4.25D
- RCC-H001-1.0M HDMI to HDMI Cable: A 1.0-meter HDMI cable
- RCC-H016-1.0M RJ45 to RJ45 UTP Cable: A 1.0-meter RJ45 cable
- Cisco Touch10: A touch control panel for managing the camera and conferencing
- W PS-19-12V8A 100-240V 47-63Hz Power Supply: A power supply for the camera
- Fiber Optic Cable Control & Video: A fiber optic cable for transmitting control and video signals
- Provided SFP: A 10Gtek-10Gigabit SFP+ LC Multi-Mode Transceiver (850nm, DDM, 300m)
- Recommended Fiber Type: OM3 LC LC Fiber Patch Cable, 10Gb Duplex 50/125 LC to LC Multimode
Product Usage Instructions
To use the Cisco Webex PTZ 4K camera, follow these steps:
-
Connect the camera to a display device using the RCC-C001-0.3M HDMI to HDMI Cable. Ensure both ends are securely connected.
-
If network connectivity is required, connect the camera to a network switch or router using the RCC-C002-0.3M RJ45 to RJ45 UTP Cable
-
For power supply, connect the camera to a power source using the PPC-018-0.4M 4Pin Mini Din to 5.5×2.5mm Barrel Cable.
-
Plug the provided W PS-19-12V8A 100-240V 47-63Hz Power Supply into a power outlet and connect it to the camera.
-
If using the RemoteCamFiberTM RCF1-CW 4TM, refer to the
RemoteCamFiberTM RCF1-CW 4TM Application Guide for detailed instructions. -
Ensure that the camera is compatible with the Cisco SX80, Codec Plus & Codec Pro codecs.
-
Use the RCC-H001-1.0M HDMI to HDMI Cable to connect the camera to other HDMI devices if needed.
-
Use the RCC-H016-1.0M RJ45 to RJ45 UTP Cable for additional network connectivity.
-
The Cisco Touch10 control panel can be used to manage the camera and video conferencing settings.
-
For fiber optic control and video transmission, use the provided Fiber Optic Cable and ensure it is connected securely.
-
If required, use the Provided SFP (10Gtek-10Gigabit SFP+ LC Multi-Mode Transceiver) for fiber optic connections. Recommended Fiber Type is OM3 LC LC Fiber Patch Cable, 10Gb Duplex 50/125 LC to LC Multimode.
Module Dimensions
- RCF1-CE™Transmitter:8.25”W x1.25”Hx4.25”D
- RCF1-HE™Receiver:8.25”W x1.75”Hx4.25”D
Provided SFP: 10Gtek – 10 Gigabit SFP+ LC Multi-Mode Transceiver (850nm,
DDM, 300m)
Recommended Fiber Type : OM3 LC LC Fiber Patch Cable, 10Gb Duplex 50/125
LC to LC Multimode
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>