i-PRO WV-PM500 Compact Microphone Unit Instruction Manual

: June 13, 2024
: i-PRO

Table of Contents

i-PRO WV-PM500 Compact Microphone Unit
Product Information
Product Usage Instructions
Precautions
Preface
Specifications
Precautions for installation
Microphone Unit
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

i-PRO WV-PM500 Compact Microphone Unit

Product Information

Product Name: Microphone Unit
Model Number: WV-PM500
Manufacturer: i-PRO Co., Ltd.
Power Feeding Method: Electret condenser microphone Plug-in power type
Operating Voltage: 1.5 V DC to 5 V DC
Maximum Current: 300 A
Directionality: Nondirectional
Frequency Range: 20 Hz to 15,000 Hz
Sensitivity: 60 dB or more A-weighted (f=1 kHz Pin= 1 Pa)
Maximum Sound Pressure Level (SPL): 110 dB (THD=10%)
Signal-to-Noise Ratio (SNR): 95 dB
Terminal / Cable: Dustproof and Waterproof, Cable length: 2.6 m (8.53 feet)
Dimensions: Approx. 60 g (0.13 lbs) (with the cover: Approx. 10 g (0.02 lbs) and cable)
Main Body Finish: PC resin, i-PRO white
Cover A Finish: PC resin, i-PRO white
Cover B Finish: PC resin, i-PRO white
Wall Mount Attachment Finish: PC resin, Black

Product Usage Instructions

Ensure that the microphone unit is securely mounted to an installation surface according to the provided Installation Guide.
If the product needs to be mounted on a section that may not provide sufficient support, reinforce the section adequately.
To prevent noise disturbance, maintain a distance of at least 1 m (3.28 feet) between the microphone unit and strong electricfields from TV or radio antennas, motors, transformers, or power lines (lamp lines) with AC100 V or more. Alternatively, use metal pipes for electric conduit work and ensure proper grounding of the pipes.
If the microphone unit will no longer be used, remove it from the installation.
For detailed installation procedures, refer to the provided Installation Procedure leaflet.

Precautions

Do not hang down from this product or use this product as a pedestal.
Failure to observe this may cause injury or accidents.
Refer installation work to the dealer.
Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
The screws and bolts must be tightened to the specified torque.
Failure to observe this may cause a drop resulting in injury or accidents.
Install the product securely on an installation surface in accordance with the installation instructions.
Failure to observe this may cause injury or accidents.
When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.

Preface

This product is a microphone unit for audio input of our network camera. This product can be used regardless of the cable length specification of our network camera. The latest information about the supported products
< Control No.: C0501>

Specifications

Microphone type and

power feeding method

| Electret condenser microphone

Plug-in power type

---|---
Power:| Operating voltage: 1.5 V DC to 5 V DC

Maximum current: 300 μA

Operating environment

Ambient operating temperature: Ambient operating humidity:

|

–20 °C to +60 °C {–4 °F to +140 °F}

10 % to 100 % (no condensation)

Storage environment

Storage temperature: Storage humidity:

|

–20 °C to +60°C {–4 °F to +140 °F}

10 % to 95 % (no condensation)

Directionality:| Nondirectional
Frequency range:| Within 20 Hz – 15,000 Hz
Sensitivity:| –40 dB ±3 dB (0 dB=1 V/Pa)
Max

SPL:

| 110 dB (THD=10 % )
SNR:| 60 dB or more A-weighted (f=1 kHz Pin= 1 Pa)
Terminal / Cable:| Terminal: ø3.5 mm stereo mini plug (L ch monaural) Plug diameter: ø6.5 mm {1/4 inches}

Cable length: 2.6 m {8.53 feet}

Cable diameter: ø3 mm {1/8 inches}

Dustproof and Waterproof:| IP65 (IEC 60529)
Dimensions:| ø45 mm × 15.5 mm (D) (with cover A)

{ø1-25/32 inches × 5/8 inches (D)}

23 mm (W) × 31.8 mm (H) × 15.5 mm (D) (without cover)

{29/32 inches (W) × 1-1/4 inches (H) × 5/8 inches (D)}

Mass:| Approx. 60 g {0.13 lbs}

(with the cover: Approx. 10 g {0.02 lbs} and cable)

Finish:| Main body: PC resin, i-PRO white

Cover A, Cover B: PC resin, i-PRO white

Wall mount attachment: PC resin, Black

Precautions for installation

In order to prevent injury, the product must be securely mounted to an installation surface according to Installation Guide.

Installation area for this product
- Select an appropriate place for the installation area (such as a strong installation surface) in your particular environment.
- Make sure that the installation area is strong enough to hold this product, such as a concrete ceiling.
- Install the camera in the foundation area of the architecture or where sufficient strength is assured.
- Do not mount the product on a plaster board or a wooden section because they are too weak. If the product is unavoidably mounted on such a section, the section shall be sufficiently reinforced.
Do not place this product in the following places
- Locations where a chemical agent is used such as a swimming pool
- Locations subject to moisture or oil smoke such as a kitchen
- Locations that have a specific environment that is subject to an inflammable atmosphere or solvents
- Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated
- Locations near coasts directly subjected to sea breezes, or locations subject to corrosive gases such as from hot springs, volcanic regions, etc.
- Locations where the temperature is not within the specified range
- Locations subject to vibrations, such as on vehicles, marine vessels, or above product lines (This product is not designed for on-vehicle use.)
- Locations subject to condensation as the result of severe changes in temperature
- Locations near rubber products containing sulfur (packing, rubber feet, etc.)
When noise disturbance may happen
- Noise may appear in video or audio near a strong electric field from a TV or radio antenna, motors and transformers, or a strong electric field/magnetic field from a power line (lamp line) of AC100 V or more.
- Conduct the power distribution work to keep 1 m {3.28 feet} away from them or conduct the electric conduit work using metal pipes. (Be sure to make ground connection of the metal pipes.)
Make sure to remove this product if it will no longer be used.

Microphone Unit

For professional use only Outdoor use
Model No. WV-PM500

Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation “<Control No.: C****>” used in these documents should be used to search for information on our technical information website (https://i-pro.com/global/en/surveillance/trainingsupport/support/technical- information.) and will guide you to the right information.

Caution:

Before attempting to connect or operate this product, please read these instructions carefully.

Notice:

This product is not suitable for use in locations where children are likely to be present.
Do not install this product in locations where ordinary persons can easily reach.
This product is a professional equipment.
For information about screws and other parts required for installation, refer to the corresponding section of this document.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.