Jaxon Grey 241178 California King Storage Bed Instruction Manual
- June 13, 2024
- Jaxon Grey
Table of Contents
Jaxon Grey 241178 California King Storage Bed
Product Information
The JAXON GREY CALIFORNIA KING STORAGE BED is a furniture piece designed for a California king-sized mattress. It features a grey finish and offers storage space with built-in drawers. The product is sold by Living Spaces and has the following SKU numbers: 241178 (not provided in the manual), 241165, 241142, and 241145. The vendor item numbers are 7YU6L6BHX, 7YU6D6FB, and 7YU6D6R.
Scan QR code to view assembly video
Assembly Parts List
BOX 1 (SKU 241165): Headboard
BOX 2 (SKU 241142): Footboard – Slat roll
BOX 3 (SKU 241145): Side rails
HARDWARE KIT PACKED IN BOX 3 (SKU 7YZZBPHW): Includes Allen bolts, flat washers, Allen key, wood screws, and center support legs
PRE-ASSEMBLED PARTS LIST:
Includes handle, foot cap, side rail bracket, drawer glide set, decorative nut
& bolt, and individual slat
Assembly Instructions
- Start by unpacking all the boxes and identifying the parts.
- Assemble the headboard (SKU 241165) using the provided hardware.
- Attach the siderails (SKU 241145) to the headboard using the specified hardware.
- Assemble the footboard – slat roll (SKU 241142) using the provided hardware.
- Attach the footboard – slat roll to the siderails using the specified hardware.
- Attach the center support legs using the provided hardware.
- Attach the pre-assembled parts such as the handle, foot cap, side rail bracket, drawer glide set, decorative nut & bolt, and individual slats as needed.
- Check that all fittings are secure and tighten if necessary.
- Ensure the maximum distributed load capacity does not exceed 800 lbs and the storage drawer capacity does not exceed 50 lbs per drawer.
WARNING:
- Maximum distributed load capacity: 800 lbs.
- Storage drawer capacity: 50 lbs. per drawer.
- Standing or jumping on this product may result in damage or injury.
Routine Maintenance:
Periodically check that the support legs are in place and exerting equal
upward pressure on the bed frame. Adjust the support legs by turning the
levelers counterclockwise to extend or clockwise to retract. Periodically
check all fittings and tighten if necessary, as they may loosen over time.
Before moving the bed, always remove the box spring and mattress. Lift the bed
instead of dragging it to avoid damaging the center support. Readjust the
levelers after moving the bed.
Care and Cleaning
For solid wood furniture care and cleaning instructions, refer to the
manufacturer’s recommendations or guidelines provided separately.
Congratulations on purchasing this handcrafted solid wood furniture product.
Please keep in mind that wood is sensitive to changes in humidity. As the
weather changes so does the relative humidity in your home and the moisture
content of your solid wood furniture. We have taken every precaution to
stabilize the lumber used to build this product. Still, you may observe plank
movement or small cracks as the seasons change, particularly during the first
6-12 months of ownership. This is normal for solid wood furniture and will not
affect the performance or longevity of this product. Dust frequently with a
clean, damp, lint-free cloth. Frequent dusting will remove abrasive build-up
which can damage a finish over time. Avoid using oily polishes or waxes. Avoid
exposing your furniture to strong sunlight. Prolonged exposure to direct
sunlight can fade the finish of your furniture. Do not expose your furniture
to any liquids. Never allow water to sit on your furniture. Do not place hot
items on top of surface, always use a mat or other protector. Alcohol, nail
polish and perfume are also dangerous, as they can dissolve the furniture
finish on contact and may require professional repairs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>