ring 1080p Stick Up Cam Wired User Guide
- June 13, 2024
- Ring
Table of Contents
ring 1080p Stick Up Cam Wired
Product Information
The Stick Up Cam Wired is a versatile security camera that can be used both indoors and outdoors. It can be powered either through an outlet using a USB power supply or through an Ethernet port that supplies Power over Ethernet (PoE). The camera connects to the Ring app, which allows you to set up and manage the camera, as well as view live video feeds.
Powering Options
- USB Power Supply: The package includes two USB power supplies, one for indoor use and one for outdoor use. To power the camera using USB, secure the power supply to a wall or floor, feed the USB cable through the hole in the bottom cover, and plug it into the camera. Then, plug the power supply into an outlet.
- PoE (Power over Ethernet): To power the camera using PoE, feed an Ethernet cable through the hole in the bottom cover and plug itinto the camera. Then, plug the other end of the cable into an Ethernet port that supplies PoE. If you don’t have PoE, you can connect one of the included USB power supplies in addition to Ethernet or purchase a Ring PoE Adapter.
Download the Ring app.
The app walks you through setting up and managing your Stick Up Cam Wired. Search for “Ring” in one of the app stores below, or visit: ring.com/app.
Grab your Wi-Fi password.
You’ll need it to set up your Stick Up Cam. Write it down below so it’s handy
when you need it:
Let’s get your Stick Up Cam ready.
- First, slide off the bottom cover. Do not reattach this cover until setup is complete!
Powering your Stick Up Cam
- You can power Stick Up Cam in one of two ways: Plug it into an outlet (with USB), or plug it into an Ethernet port that supplies Power over Ethernet (or PoE).
- Using PoE requires a special type of Ethernet switch or adedicated PoE power supply, like the Ring PoE Adapter (sold separately).
- For outdoor use, install your PoE Adapter indoors, then run an Ethernet cable outdoors to your Stick Up Cam Wired.
How to power
How to power Stick Up Cam with USB:
Two USB power supplies are included: One for indoor use, and one for
outdoor use.
If you plan to install Stick Up Cam outdoors, secure the power supply to a wall or floor with the included screws.
Feed your chosen USB cable through the hole in the bottom cover and plug it into your Stick Up Cam. Then, plug the power supply into an outlet.
How to power Stick Up Cam with PoE: Feed your Ethernet cable through the
hole in the bottom cover and plug it into your Stick Up Cam. Then, plug the
other end of the cable into an Ethernet port that supplies Power over Ethernet
(or PoE).
Don’t have Power over Ethernet?
If you want to use a wired network connection but don’t have PoE, connect one
of the included USB power supplies in addition to Ethernet, or purchase a Ring
PoE Adapter.
Set up your Stick Up
Cam in the Ring app. In the Ring app, select Set Up a Device. When prompted,
select Security Cams and follow the in-app instructions.
Try it out!
After setup, tap the Live View button in the Ring app to see live video from
your Stick Up Cam.
Blue light flashing?
If the light on the front of your Stick Up Cam is flashing after setup, it’s
updating its software. Do not unplug your Stick Up Cam while the light is
flashing!
INSTALLATION
Install your Stick Up Cam Wired.
Choose a location.
Stick Up Cam is happy just about anywhere, indoors or out. It comes ready to
sit on a flat surface like a table or shelf, but can also be mounted to a wall
or ceiling. Choose a spot where it can provide the view you want, within reach
of a power outlet or an Ethernet port with PoE.
How to use Stick Up Cam on a table or shelf:
- Make sure that any connected cables have been routed through the hole in the bottom cover.
- Then, slide the cover into place on your Stick Up Cam. Secure the cover with the attached screw, using the star-shaped end of the screwdriver bit.
- Finally, place Stick Up Cam in your chosen position. Your Stick Up Cam is now ready to protect you.
How to install Stick Up Cam on a wall:
-
Remove the plastic cover and rubber pad from the base.
You’ll put the cover back on once you’ve mounted your Stick Up Cam. -
Flip the base to the rear.
The base of the stand is hinged. Before wall-mounting, flip the base down and behind your Stick Up Cam. -
Push the rubber pad back into the base.
The rubber pad should sit between your wall and the base of your Stick Up Cam. -
Drive the screws.
Hold the round part of the base against your wall, rubberside down. Use the integrated level to ensure it’s straight. Then mount it with the included screws.
How to install Stick Up Cam on a ceiling:
-
Remove the plastic cover from the base.
You’ll put the cover back on once you’ve mounted your Stick Up Cam. -
Rotate the stand above the camera:
The whole stand can rotate on its axis. Before ceilingmounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam. -
Drive the screws.
Hold the round part of the base against your ceiling, rubber-side down. Then mount it with the included screws.
Final steps for wall or ceiling mounting:
-
Close it up.
Make sure that any connected cables have been routed through the hole in the bottom cover. Then, slide the cover into place on your Stick Up Cam. Secure it with the attached screw, using the star-shaped end of the screwdriver bit. -
Snap the cover back onto the base.
Then, secure it with the included security screw, using the star-shaped end of the screwdriver bit. Now your Stick Up Cam is installed and ready to protect you.
For additional help, visit: ring.com/help Or give us a call…
- US 1 800 656 1918
- Canada 1 855 300 7289
- Worldwide +1 310 929 7085
For a list of all our customer support numbers, visit: ring.com/callus.
CONTACT
- To review your warranty coverage, please visit www.ring.com/warranty.
- Patents: www.ring.com/patents.
- © 2018 Ring LLC or its affiliates.
- RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.
- Last updated: 10/18/18
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>