EQUATOR PFL 255 Portable Fireplace with LED Light Owner’s Manual
- June 13, 2024
- EQUATOR
Table of Contents
EQUATOR PFL 255 Portable Fireplace with LED Light Owner’s Manual
Warranty
Equator Appliances undertakes to the consumer-owner to repair or, at our option, to replace any part of this product which proves to be defective in workmanship or material under normal personal, family or household use, in USA and Canada, for a period of one year from the date of original purchase. For commercial use, the product is warranted for a period of 90 Days. During this period, we will provide all labor and parts necessary to correct such defect, free of charge, if the appliance has been Installed and operated in accordance with the written instructions with the appliance. Ready access to the appliance, for service, is the responsibility of the consumer-owner. Services would be provided from Monday to Friday between normal business hours.
Exclusions
In no event shall Equator Appliances be liable for incidental or consequential damages or for damages resulting from external causes such as abuse, misuse, incorrect voltage or acts of God. This warranty does not cover service calls which do not involve defective workmanship or materials covered by this warranty. Accordingly, diagnosis and repair costs for a service call which does not involve defective workmanship or materials will be the responsibility of the consumer-owner.
pecifically, the following work is not covered under warranty and does not constitute warranty work:
Installation – e.g. Insufficient spacing around appliance Maintenance – e.g. Cleaning the appliance using solvents Mishandling – e.g. Breakage of glass
Most work is covered. The defining factor is, has the machine malfunctioned (Equator Appliances is responsible) or has the customer omitted or done something to cause the machine to malfunction (customer is responsible). Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to y
WARRANTY SERVICE
This warranty is given by:
Equator Appliances
10222 Georgibelle Drive, Suite 200
Houston, Texas 77043-5249
For Service:
Call: 1-800-776-3538
Email: service@ApplianceDesk.com
Web: www.ApplianceDesk.com
Business hours: 9:00 am to 5:00 pm weekday
You can register your Warranty by either of the following methods:
-
Open Smart Phone
-
Open Photo
-
Scan QR Code
-
Click the Link
-
Register online at ApplianceDesk.com/Warrant
GENERAL
Since it is a responsibility of the consumer-owner to establish the warranty period by verifying the original purchase date, Equator Appliances recommends that a receipt, delivery slip or some other appropriate payment record be kept for that purpose.
This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
All rights reserved. Manual subject to change without notice.
SAFETY INFORMATION
Read this manual before installing and operating this appliance. Failure to follow these instructions may result in electric shock, fire property, or personal injury.
WARNING
- ALWAYS keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet away from all sides of the appliance.
- DO NOT place the appliance near a bed because objects such as pillows or blankets can fall o fifth bed and be ignited.
- DO NOT COVE R or block the air vents of the appliance. Doing so could cause a fire.
- AVOID fire or electric shock! NEVER insert or allow any foreign objects to enter the ventilation or exhaust openings of the appliance.
- Prevent Fire! Keep all flammable liquids, like gasoline or paint, away from the appliance. The fireplace produces arcing sparks that could ignite flammable liquids.
- DO NOT cover the appliance in any manner. Doing so could block the air flow and cause the unit to overheat or could ignite the material covering it.
- NEVER run the power cord under carpet, rugs, runners, or any other covering. Doing so could cause the cord or materials covering the cord to overheat.
- AVOID FIRE! Regularly inspect all air vents to make sure they are free from dust, lint, or other blockage. Unplug the unit and clean with a vacuum ONLY. DO NOT rinse or get it wet.
- « Do not store or use gasoline or other flammable liquids in vicinity of this appliance.
WARNING
For residential use only! NOT for commercial use!
NEVER use this fireplace for other than its intended purpose.
- Use only the electric insert and included mantel. NEVER use a mantel from another maker.
- NEVER use this electric fireplace insert unless it is properly installed in the correct mantel.
- Use extreme caution if using the appliance near children, or where children may be present.
- NEVER leave the appliance unattended. ALWAYS unplug it when not in use. The appliance is hot when in use. A VOID INJURY! DO NOT TOUCH hot surfaces or attempt to move it while it is hot.
- LWAYS turn the appliance off before unplugging it from the outlet.
- AVOID INJURY! Keep the cord from crossing traffic areas to avoid tripping
- NEVER modify this fireplace. Doing so could result in personal injury or property damage. Modification of this fireplace completely voids all warranties.
- Discontinue use if this fireplace malfunctions or is dropped or damaged in any manner.
- NEVER place any objects on top of this mantel. Any object placed on top may cause it to tip over.
NEVER sit, stand, or climb on this electric fireplace. Doing so could cause the unit to tip over, resulting in serious personal injury or property d
WARNING
- Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
- ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace.
- ALWAYS store the appliance in a dry location. NEVER use the fireplace if it has become wet.
- NEVER use the appliance in bathrooms, laundry rooms, or any other location where the heater could fall into a bathtub or pool, become damp or come in contact with water.
- NEVER hang this unit on a wall directly below an electrical outlet.
- NEVER operate the appliance if the power cord or plug has become damaged, or if the grounding pin is damaged or missing.
- ONLY use this heater on a 110V 15 Amp grounded circuit. NEVER overload the circuit. If the appliance trips the circuit breaker, unplug all other appliances on the same circuit before the next use. Avoid plugging other appliances into the same circuit as the fireplace.
- NEVER plug the appliance into an outlet that is old, cracked, or has any loose wires or connections. Plugging into a faulty outlet could result in electric arcing within the outlet that could cause the outlet to overheat or catch fire.
- ALWAYS check the cord and plug connections with each use!
- MAKE SURE the plug fits tight in the outlet! Faulty wall outlet connections or loose plugs can cause the outlet to overheat.
- Heaters draw more current than small appliances. Overheating may occur even if it has not occurred with the use of other appliances.
- During use check frequently to see if the plug outlet or faceplate is HOT!
- If the outlet or faceplate is HOT, discontinue use immediately and have a qualified electrician inspect and/or replace the faulty outlets.
PREPARATION
This appliance has a front panel made of GLASS!
ALWAYS use extreme caution when handling glass.
Failure to do so could result in personal injury or property damage.
Place Fireplace on a smooth flat surface, leaving 3 feet of space all around it.
Attaching the wheels is optional. If the wheels are attached, they must be locked to prevent the appliance from moving once it is in place.
The following accessories and parts are included with the fireplace:
remote control, wheels (4) and wheel screws (16).
Tools required for assembly: / / Phillips screwdriver (not included)
Install the wheels as shown.
urn the mantel over on a soft level surface. Align the holes in each wheel with the holes in the mantel. Thread wheel screws through each hole and into the mantel. Tighten securely with a Phillips screwdriver. DO NOT OVER- TIGHTEN.
After attaching the wheels please make sure to LOCK the wheels so the fireplace does not move.
WARNING! This fireplace has wheels. NEVER use near stairs or ramps, or on unlevel surfaces. Doing so could cause the fireplace to roll away and cause personal injury or property damage.
OPERATION and SAFETY
**Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in electric shock, fire, serious injury, or death.**
Power
Make sure the ON/OFF switch, located on the control panel, is in the OFF position. Plug the power cord into a 110V / 60Hz 15 Amp grounded outlet. Make sure the outlet is in good condition and the plug is not loose. NEVER exceed the maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.
Temperature Limiting Safety Feature
This appliance is equipped with a Temperature Limiting Safety Feature. Should the appliance reach an unsafe temperature (212°F / 95C), the appliance will automatically turn OFF.
If the fireplace tips over, the appliance will automatically turn Off. This is another safety feature.
To reset :
- Unplug the power cord from the outlet.
- Turn the ON/OF switch on the CONTROL PANEL to OFF. Wait 15 minutes.
- Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are, use a vacuum to clean the vent areas.
- With the POWER switch in the OFF position, plug the power cord back into the outlet.
- If it switches o ffagain, UNPLUG THE APPLIANCE RIGHT AWAY! Have the outlets, wiring, and breaker box inspected by a professional. Make necessary repairs before using the appliance.
Control Panel and Remote
The control panel is in the upper right corner of the appliance.
Button | Function | Action |
---|
| Power button: Turns the
unit ON and OFF.| Press once. Indicator light turns on. Power turns on. All
functions enabled. Heater turns on and blows warm air
| TIMER button: Controls timer settings to turn off fireplace at a
selected time. The time can be selected from 30 mins to 9 hours|
- Press once. Indicator light turns on.
- Press again until desired setting is reached. LED display shows the time
| FLAME button: Control the flame color and brightness level| . Press for
3 seconds to change the flame color. 2. Press for 5 seconds for the flame to
get brighter
| HEAT button: Controls the temperature|
- Press for 5 seconds to select the desired temperature setting.(65-95F)
- Press repeatedly to select the temperature
| TEMPERATURE button to increase heat. (On Remote Control Only)| Press to
increase the heat output
| TEMPERATURE button to decrease heat. (On Remote Control Only)| Press to
decrease the heat output
Operation
Once the appliance is in place, it is ready to use. Ensure there is at least 3
feet of space all around the fireplace.
Power On/Off
Press the Power On/Off button on the Control Panel to turn on the Fireplace.
It can also be turned on with the Remote Control.
Timer
The Fireplace can be set to turn o ffby pressing the Timer button on the
Control Panel or on the Remote Control. The Timer can be set from 30 minutes
to 9 hours. Press to increase from 30 minutes to 1 hour and then in 1-hour
increments. The Indicator Light will illuminate on the Control Panel and as
the time is selected, it will show on the Control Panel Display.
Flame
The Flame button can change the colors and the brightness in the fireplace.
The Indicator Light and flame selection will show on the Control Panel
Display.
- Press the button for 3 seconds to select from 7 colors: Orange, green, blue, white, green/orange, blue/pink, yellow.
- Press the button for 5 seconds to increase the brightness of the fireplace logs and flames. There are 5 levels of brightness, from dim to very bright.
Heat
The Heat button can be used to select the temperature of the fireplace from 65
— 95°F. Press it for 5 seconds to select the desired temperature. The
Indicator Light and temperature will show on the Control Panel Display.
Remote Control
Al the functions on the Control Panel can also be selected from the Remote
Control. In addition, there are Up and Down arrow buttons on the Remote which
control the temperature to increase or decrease.
CARE AND MAINTENANCE
Risk of electric shock! DO NOT OPEN! No user-servicable parts inside!
Electrical components are integrated in the fireplace and are not serviceable by the customer.
ALWAYS turn the appliance OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury.
NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury.
Metal: Bu ffusing a soft cloth, slightly dampened with a citrus oil-based product. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Glass: Use a good quality glass cleaner and dry thoroughly with a paper towel or lint-free cloth. NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Vents: Use a vacuum or duster to remove dust and dirt from the heater and vent areas. Clean the exterior of the fireplace with a slightly damp cloth or duster.
Wood: NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface. Clean the exterior of the fireplace with a slightly damp cloth or duster.
Storage: Store the apppliance in a clean dry place when not in use.
TROUBLESHOOTING
WARNING Turn off the appliance, unplug and let cool for at least 10 minutes before attempting to service. Only a qualified professional should attempt to service or repair the appliance.
Problem | Possible Cause | Possible Solution |
---|---|---|
The appliance turns o ffand will not turn back on | The appliance does not turn | |
on when the button is pushed to “ON Main circuit breaker has been tripped. |
Turn all controls off, unplug the appliance, allow to cool for at least 10
minutes, then plug back in and restart. Reset main circuit breaker
The appliance does not turn on when the button is pushed to “ON| The overheat
protection device in the appliance has been triggered| Turn all controls off,
unplug the appliance, allow to cool for at least 10 minutes, then plug back in
and restart.
The appliance does not turn on when the button is pushed to “ON| Low batteries
Manual control on the appliance must be “ON” before operating the remote
control| Replace all batteries in the remote control. Push the appliance “ON”
using the manual control panel, then use remote control to operate.
Please dispose of this appliance in accordance with local regulations.
Technical Specifications
Model: PFL 255
Color: Walnut
Capacity :5000 BTU
Room Heat :400 sq. ft.
Electrical: AC 110V/60HZ
Heating Power :750/1500W
Weight (net/gross) lbs :.50/62
Product Dimensions (HxWxD) inch :21.9 x 25.5 x 12.2
California Proposition 65
WARNING: This product contains chemical known to the State of California
to cause cancer and birth defects or other reproductive harm.
Equator Advanced Appliances USA was established in 1991 for providing the most Efficient, Highest Quality andInnovative household appliances.
Equator’s missio n is to provide Innovative, Practical, Top-Quality appliances that Save Time, Space and Energy and Simplify domestic chores.
Equator’s vision is to Improve the Quality of Life for our Customers!
Equator Appliances USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>