SITECOM MD-1001 USB ID Card Reader User Manual
- June 13, 2024
- SITECOM
Table of Contents
SITECOM MD-1001 USB ID Card Reader
Product Information
- Product Name: USB ID Card Reader
- Model: MD-1001
Specifications
- USB-A connector
- Male USB connector
- Cable length: 60 cm
- Micro SD card slot with a max speed of 480 Mbps
- Smartcard / ID Cardreader with ISO7816, T=0 and T=1 support
- LED indicator for card status
- Supported OS: Windows 7/8/10/11, Mac OS X 10.2 and above, Chrome OS
- Dimensions: 42 x 63 x 12 mm (excluding cable)
- Weight: 30 grams
Product Usage Instructions
- Connect the USB-A connector to the USB port of your computer.
- Insert a Micro SD card into the card slot to copy files to and from the computer.
- To use the Smartcard / ID Cardreader, insert the card into the card slot.
- The LED indicator will light up when a card is inserted.
- Please note that while the product is plug-and-play, additional software may be required to use the Smartcard / ID Cardreader. Consult your ID/eID card or bank card issuer for information on any required software.
Important: A free USB port is required to use this device.
Note: Support for future ID card standards cannot be guaranteed.
Warranty and Support
This product comes with a 24-month warranty. Your rights under national law remain unaffected by this warranty. For lifetime technical support, visit www.sitecom.com or contact support@sitecom.com.
OVERVIEW
Item/Specifications/Description
- USB-A connector/Male USB connector/Connects to USB port of computer.
- Cable/60 cm
- Micro SD card slot/Max. speed 480 Mbps. Supports cards up to 2GB/Insert a MicroSD card to copy files to and from the computer
- Smartcard / ID card slot/ Cardreader specs: ISO7816, T=0 and T=1 asynchronous card EMV4.0 level 1 compatible PC/SC 2.0 smartcard support I2C interface support/Reads ID/eID cards, bank cards, smartcards. While the product does not require any drives and is plug and play, additional software may berequired to use this product. Consult your ID/eID card or bank card issuer for information on any required software.
- LED indicator/Status LED/Active when card is inserted
Other specifications
Supported OS| Windows 7/8/10/11, Mac OS X| A free USB port is required to use
| 10.2 and above, Chrome OS| on this device. The device is plug-and-play.
| | However, for ID cards and smartcards
| | additional software may be required to
| | use this product. Consult your ID/eID
| | card or bank card issuer for information
| | on the required software. Support for
| | future ID card standards can not be
| | guaranteed.
Dimensions| 42 x 63 x 12 mm| The dimensions exclude cable
| | (60cm)
Weight| 30 grams| This product is lightweight for ease
| | of carrying
Package| 1x MD-1001 & 1x User manual| Keep this manual for future reference
contents| |
Important safety instructions
- Do not drop. Frequent dropping may lead to malfunctioning.
- Do not disassemble. Repairs should only be done by qualified service centers.
- Do not expose to liquids or fire.
- Do not extend cable. Extending cable may lead to poor performance.
- Do not exceed 40° Celsius ambient temperature. Product may not function properly above 40° Celsius
Support
- Warranty 24 months warranty. Please note that your rights under national law remain unaffected by this warranty.
- Support Lifetime technical support
- Website www.sitecom.com.
- Contact support@sitecom.com.
- Type: MD-1001