nVent TPB75H Telescoping Plumbing Bracket Clip User Guide
- June 13, 2024
- nVent
Table of Contents
nVent TPB75H Telescoping Plumbing Bracket Clip
The nVent CADDY Telescoping Plumbing Bracket Clips provide contractors a quick and easy way to install supply and drain line swithin stud walls. This innovative tool-free design allows for faster installs and adjustments, as well as greater flexibility. When combined with the nVent CADDY Telescoping Plumbing Bracket, this system delivers a complete solution that will save contractors time and money.
Product Specifications:
- Material: High Density Polyethylene (HDPE)
- Part Number: TPB75H, TPB75V
- Outer Diameter (OD): 2.95″ (TPB75H), 3.5″ (TPB75V)
- Pipe Size: W OD
- Length (L): 0.9″ (TPB75H), 2.2″ (TPB75V)
- Width (W): 2.96″ (TPB75H), 1.74″ (TPB75V)
- Height (H): 2.96″ (TPB75H), 1.74″ (TPB75V)
For more information, please visit our website: nVent.com/CADDY
nVent CADDY Telescoping Plumbing Bracket Clip
The nVent CADDY Telescoping Plumbing Bracket Clips provides contractors a quick and easy way to install supply and drain lines within stud walls. This innovative tool-free design allows for faster installs and adjustments, as well as greater flexibility. When combined with the nVent CADDY Telescoping Plumbing Bracket this system delivers a complete solution that will save contractors time and money.
FEATURES
- Can be used for horizontal mounting in conjunction with the nVent CADDY Telescoping Plumbing Bracket Clip
- Accommodates both ½ and ¾ inch Pex Tubing and Copper Pipe—reducing number of SKUs required
- Quickly attaches and secures to the bracket without the use of tools or hardware
- Due to the wraparound design, clips can be added before or after lines have been run
- Innovative design allows for easy adjustment and repositioning of the clip anywhere along the span of the bracket—simply pinch tabs on the clip and slide in either direction
- Horizontal mounting clip can also be attached directly to stud for use as a through-stud grommet (requires screw to secure to stud)
Material: High Density Polyethylene (HDPE)
Part Number
| Outer Diameter OD|
Pipe Size
| PEX
Tube Size
| Copper Tube Size| Width W| Height H| Length
L
---|---|---|---|---|---|---|---
TPB75H| 0.625 – 0.875″| 0.5″| 0.5 – 0.75″| 0.5 – 0.75″| 2.95″| 2.96″| 0.9″
TPB75V| 0.625 – 0.875″| 0.5″| 0.5 – 0.75″| 0.5 – 0.75″| 3.5″| 1.74″| 2.2″
©2023 nVent. All nVent marks and logos are owned or licensed by nVent Services
GmbH or its affiliates. All other trademarks are the property of their
respective owners. nVent reserves the right to change specifications without
notice.
CADDY-DS-N00318-TelescopingPlumbingBracketClips-USEN-2308
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>