Jabra Speak 410 USB Portable Speakerphone User Manual
- June 13, 2024
- Jabra
Table of Contents
Speak 410
User manual
WELCOME
Congratulations on purchasing your new Jabra SPEAK 410. We are sure you will
enjoy its range of features and find it easy to use.
Jabra SPEAK 410 Features
- Wideband audio for exceptional sound quality.
- Omni-directional microphone.
- Fully integrated call controls for remote softphone operation.
- Call waiting (requires supported softphone with call waiting functionality).
- LED and audio indicators.
- Speed dial with the one-touch Smart button* (must be enabled in Jabra Direct. Requires supported softphone with speed dial functionality).
PRODUCT OVERVIEW
*Newer Speak 410 variants (with the Smart button) have a Ver. ID
beginning with B, or later. Older Speak 410 variants (without the Smart
button) have a Ver. ID beginning with A.
The Ver. ID can be found on the bottom of the Speak 410.
INSTALLATION
Jabra Direct
Jabra Direct is software designed to support the Jabra SPEAK 410.
Download and install Jabra Direct from www.jabra.com/direct.
CONNECTING
To connect the Jabra SPEAK 410, connect the USB cable attached to the
speakerphone to any available USB port on a PC or power-supplied hub. The
Jabra LED will light up white to indicate the speakerphone is connected and
powered on.
Note : The speakerphone must be connected to a PC USB port or power-
supplied hub, and not a buspowered USB port (such as a keyboard with an
integrated USB).
SETUP
When the Jabra SPEAK 410 is connected to a PC, Windows will automatically
configure the speakerphone as the default audio device.
To manually change the default audio device in Windows:
- Click on Windows Start and then launch Windows Control Panel.
- Open Sound and Audio Devices, and select the Audio tab
- Under Sound Playback, and Sound Recording, set the preferred audio device as the default device.
Click apply to save the settings.
CALL FUNCTIONS
Basic functions
| Event | Action |
|---|---|
| Make a call | Dial the phone number using the PC (soft-phone) |
| Answer an incoming call | Tap the green handset button |
| End a current call, or reject an incoming call | Tap the red handset button |
| Speed dial (off by default) | Tap the Smart button (use Jabra Direct to enable |
speed dial)
Mute/un-mute the Microphone
Tap the mute button to toggle between mute/un-mute. When muted, all LEDs will
light up red. When the speakerphone is ringing, or when a call is ended, the
microphone will always be un-muted.
Increase/decrease Speaker Volume
Tap (or press and hold) the + / – buttons.
The speakerphone volume has a twelve-step scale, indicated by twelve white
LEDs arranged in a circle on the speakerphone.
Increase/decrease Ringtone Volume
- Press and hold the Jabra button for 2 seconds. The LEDs will light up yellow, and the speakerphone will play the current ringtone volume.
- Tap (or press and hold) the + / – buttons to adjust the ringtone volume.
- Tap the Jabra button, or do not press any buttons for 2 seconds, to apply the new ringtone volume
Note : When the speakerphone is ringing, tap (or press and hold) the + / – buttons to increase/decrease the ringtone volume.
Call Waiting
Call waiting allows a current call to be placed on hold, and an incoming call
to be answered. Additionally, it is possible to switch between the held call
and the current call. Supported softphones with call waiting functionality
only.
Accept incoming call, and put current call on hold| Tap the green handset
button
---|---
Reject incoming call, and remain on current call| Tap the red handset button
Switch between current call, and call on hold| Tap the green handset button
End current call, and switch to call on hold| Tap the red handset button ,
and then tap the green handset button
Listening to Music
To listen to music played on a PC using the speakerphone, the Jabra SPEAK 410 must be set as the default audio playback device in Windows.
- Launch Windows Control Panel, and double-click Sound and Audio Devices.
- Select the ´Audio´ tab, and set the Jabra SPEAK 410 as the default sound playback device . Click apply to save your settings.
Music played on the PC will now play through the connected speakerphone.
© 2010 GN Audio A/S. All rights reserved. Jabra ® is a trademark of GN Audio
A/S.
All other trademarks included herein are the property of their respective
owners.
(Design and specifications subject to change without notice).
Made in China
MODEL: PHS001U
JABRA SPEAK 410 USER MANUAL
Declaration of Conformity can be found
onwww.jabra.com/CP/US/doc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>