Rhima RU-40 Automatic Dishwashers Instruction Manual

Rhima RU-40 Automatic Dishwashers

OPERATING INSTRUCTIONS

• Use only non-foaming, non-chlorinated detergents suitable for automatic dishwashers such as Rhima’s range of detergents
• Ensure clear hose is inserted into the detergent bottle & green hose is inserted into rinse additive bottle
• For best performance connect machine to HOT water
• If pre-soaking do not use regular dishwashing liquid as significant foaming may result during the wash cycle

1. ON/OFF/STAND-BY
2. Push button to start cycle
3. Push to drain (optional)
4. Tank temperature display
5. Boiler temperature display
6. Cycle indicator
7. Tank filling/draining indicator
8. Filling indicator
9. Draining indicator
10. STAND-BY indicator
11. Cycle scroll bar
12. Set temperature indicator

Operating the machine

INTIAL FILL AND HEATING

1. Close the door and press the ON/OFF switch (1)
2. Machine is ready for use when the TEMPERATURE REACHED INDICATOR (12) illuminates
3. The WASH TANK (4) and BOILER (5) temperature indicators display the wash tank and boiler temperatures respectively

DISHWASHER OPERATION

1. Load the rack with plates/cups/glasses ensuring items do not overlap

2. Close the door and start the wash cycle by pushing and holding the START button (2) for 1 second.
   Note: The 4 wash prgrams (6) can be scrolled through by pressing & holding the START button (2). When the desired program is selected release the START button (2)

3. The wash cycle will begin, and the progress will be indicated on the CYCLE SCROLL BAR (11)

4. When cycle is finished the START button (2) will flash

5. The washed items will air-dry within a few minutes of being removed from the dishwasher. The use of rinse additive will improve drying times

Self Clean Cycle & Regular Maintenance

SELF CLEAN CYCLE

1. To run the SELF-CLEAN cycle, press and hold the START button (2) for 5 seconds and the SELF-CLEAN cycle will start automatically
2. On completion, drain the machine by following machine draining instructions

REGULAR MAINTENANCE

1. Remove the fixing screw (D) Fig. 3 to remove the wash/rinse arms. Check that the nozzles (E) Fig. 3 are not blocked with food waste. The nozzles can be removed for cleaning if required
2. Reinstall the wash/rinse arms using fixing screw (D) Fig. 3.

• Rhima Australia Pty Ltd 72-74 Woodlands Drive Braeside 3195 Tel: 03 8586 5444 Fax: 03 8586 5454 www.rhima.com.au
• Rhima New Zealand Ltd Unit 7, 13 Beatrice Tinsley Crescent Albany Auckland 0632 New Zealand Tel: 09 414 5575 www.rhima.co.nz
• Rhima Singapore Pte Ltd 10 Tampines North Drive 4 #05-09 JTC Space @ Tampines North Singapore 528553 Tel: +65 9107 8943 www.rhima.sg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>