EIZO FlexScan EV2450 Full HD LCD Monitor Setup Guide

EIZO FlexScan EV2450 Full HD LCD Monitor

Introduction

Utilize the EIZO FlexScan EV2450 Full HD LCD Monitor to improve your viewing experience. The clarity and color accuracy of this 23.8-inch display are redefined, making it an incredible option for both professionals and hobbyists. Every detail comes to life when you use Full HD resolution, whether you’re editing photos, watching movies, or using a spreadsheet.

Its modern style and ultra-thin bezels enhance the aesthetics of your workstation while maximizing screen space. You’ll like the ergonomic versatility, which enables you to adjust viewing angles and height for maximum comfort over lengthy workdays. The energy-saving features on this environmentally conscious monitor help create a greener workplace. Take advantage of the EIZO FlexScan EV2450 to enter a new era of visual brilliance.

Important
Please read PRECAUTIONS, this Setup Guide, and the User’s Manual stored on the CD-ROM carefully to familiarize yourself with safe and effective usage. Please retain this guide for future reference.

• For details such as screen adjustments or settings, see the User’s Manual on the EIZO LCD Utility Disk (CD-ROM).

Package Contents

Stand Assembly

Connections

Angle and Height Adjustment

Using the Monitor in the Portrait Display Position
Raise the screen to the highest position, tilt it upward, and then rotate it left or right by 90°.

Note

• A graphics board that supports portrait display and configuration of settings are required. Refer to the User’s Manual of the graphics board for details.

Bundling Cables

Screen Display

Language

No-Picture Problem

If no picture is displayed on the monitor even after the following remedial action is taken, contact your local EIZO representative.

Problems| Possible cause and remedy| Problems| Possible cause and remedy
---|---|---|---
 |

The power indicator does not light.

| •   Check whether the power cord is connected properly.

•   Turn the main power switch on.

•   Touch .

•   Turn off the main power, and then turn it on again a few minutes later.

|  |

The power indicator is lighting orange.

| 3. Select “Compatibility Mode”.

4. Select “On”.

5. Select “Apply” and then .

6. Reboot the PC.

 | The power indicator is lighting white.|

•   Increase “Brightness”, “Contrast” and/or “Gain” in the Setting menu.

| No picture|

Power indicator is

flashing orange.

| •   The device that is connected using DisplayPort has a problem. Solve the problem, turn off the monitor, and then turn it on again. Refer to the User’s Manual of the output device for further details.
 | •   Switch the input signal.

•   Operate the mouse or keyboard.

•   Check whether the PC is turned on.

•   Depending on the PC and graphics board, the input signal is not detected and the monitor does

not recover from the power saving mode. If the screen is not displayed even after moving the mouse or pressing any key on the keyboard, execute the following procedure.

The problem may be improved.

1. Touch to turn off the monitor.

2. While touching the leftmost switch, touch for more than 2 seconds.

The “Administrator Settings” menu appears.

No picture

|  |  |
 |  | •   The message shows that the input signal is out of the specified range.

•   Check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor.

•   Reboot the PC.

•   Select an appropriate setting using the graphics board’s utility. Refer to the manual of the graphics board for details.

 |

The power indicator is lighting orange.

|

The message appears.

| This message appears when the signal is not input correctly even when the monitor functions properly.

Example:

 |  |  |

If any problems occur after displaying the screen, refer to “Chapter 5 Troubleshooting” in the User’s Manual on the CD-ROM.

Tips for choosing the right swivel arm for your monitor
This monitor is intended for computer workstations. If the swivel arm included in the standard accessories is not used, it must be used instead a suitable other swivel arm must be installed. When selecting the swivel arm, the following information must be taken into account:

The stand must meet the following requirements:

• a) The stand must have sufficient mechanical stability to support the weight of the display device and the specified accessories own. The weight of the display device and the accessories are specified in the associated operating instructions.
• b) The base must be attached in such a way that the top line of the screen display is not higher than the user’s eye level in a sitting position.
• c) In the case of a standing user, the display device must be attached in such a way that the height of the center of the screen above the Floor is between 135 – 150 cm.
• d) The stand must be able to tilt the screen device (max. forward: 5°, min. backward≥ 5°).
• e) The stand must be able to rotate the screen device (max. ±180°). The maximum effort required for this must be less than 100 N.
• f) The base must remain in the position into which it was moved manually.
• g) The gloss level of the base must be less than 20 gloss units (semi-matt).
• h) The stand with the display device must be resistant to tipping when tilted up to 10° from the normal upright position.

FAQ’s

What is the EIZO FlexScan EV2450 24-Inch Full HD LCD Monitor?

The EIZO FlexScan EV2450 is a 24-inch Full HD LCD monitor known for its high- quality display and advanced features.

What is the screen size and resolution?

The monitor features a 24-inch screen with a Full HD (1920 x 1080 pixels) resolution.

What is the panel technology used?

The monitor typically uses an IPS panel technology for accurate colors and wide viewing angles.

Is it suitable for color-critical work?

Yes, the EIZO FlexScan EV2450 is often used by professionals for color- critical tasks due to its excellent color accuracy.

What is the refresh rate?

The monitor usually offers a refresh rate of 60 hertz (Hz) for smooth motion.

Does it have built-in speakers?

The monitor does not typically include built-in speakers, as it is designed for professional use where external audio solutions are preferred.

What connectivity options are available?

The monitor often includes ports like HDMI, DisplayPort, DVI, and USB for connecting various devices.

Is it energy-efficient?

Yes, the EIZO FlexScan EV2450 is known for its energy-efficient design and is often Energy Star certified.

Does it have an adjustable stand?

Yes, the monitor typically comes with an adjustable stand for ergonomic positioning.

Is it VESA mount compatible?

Yes, the monitor usually supports VESA mounting, making it easy to mount on monitor arms or wall brackets.

What is the response time?

The monitor's response time is usually around 5 milliseconds (ms) for minimal motion blur.

Is it suitable for multi-monitor setups?

Yes, the EIZO FlexScan EV2450 is often used in multi-monitor configurations for enhanced productivity.

References:EIZO FlexScan EV2450 Full HD LCD Monitor – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>