Hengxin Weiye V720 Bulb Network Camera User Guide
- June 12, 2024
- Hengxin Weiye
Table of Contents
Bulb network camera user’s manual
V720 Bulb Network Camera
Thank you for purchasing this product. Please read this manual carefully before using it and keep it in a safe place.
Client downloading
Please scan the lower QR code, download and install the “V720” app, or search for “V720” in the mobile phone application store to download and install.
http://v720.naxclow.com/app/api/DFSFdfsFile/dynamicAppDownloadLink
Add device
-
Open the “V720” APP and click “+” in the upper right corner of the page to start the binding process
-
Follow the instructions on the page to power on the device and reset the device.
-
Select or enter the WiFi account you want to use and fill in the password
-
Wait for the device to be bound successfully.
install equipment
(Tip: When installing the device, please disconnect the power first, and then turn on the power after the installation is complete.)
Device function analysis
Matters needing attention
- The applicable working temperature of this product is -10°C~50°C. Please do not use this product in an environment where the temperature is too high or too low.
- This product is a precision electronic product. Please do not use this product in an environment where is excessively wet or may cause water to enter the product.
- To better use this product, please avoid the front and side of the lens close to the glass, white wall and other reflective objects, in order to avoid the picture is bright near and dark in the distance or whitish.
- Please ensure that this product is installed within the range of Wi-Fi signal coverage, and placed as far as possible in a location with better Wi-Fi signal, and try to install it far away from the microwave oven or other locations that may affect the signal.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>