TECHALOGIC CF-1 Cycle Front Light with Integrated Full HD 1080P Wide Angle Camera User Guide
- June 12, 2024
- TECHALOGIC
Table of Contents
TECHALOGIC CF-1 Cycle Front Light with Integrated Full HD 1080P Wide
Angle Camera
Quick Start Guide
- Power On/Off: Press and hold the power button to turn the camera on. You will hear 3 beeps when successfully turned on, followed by a further one beep to confirmrecording.
- Status Indicator: The status indicator will flash red when the battery is low and green when recording.
- Power Off: Press and hold the power button. You will hear 5 beeps and the camera will power down.
- Video Mode: The camera is set to loop recording continuously in 5-minute segments at a default resolution of 1080P/30FPS. It will automatically overwrite the oldest files when the SD card is almost full.
- Photo Mode: The camera automatically enters recording mode when powered on. To change it to automatic photo shooting mode (one photo per second), press the camera button twice. You will hear two quick beeps to confirm the mode change. Photo resolution is up to 12M and can be adjusted in the App settings.
- LED Light Settings: After powering up, press the light mode button to change the light pattern. This does not affect the current recording or photo function.
- Mode 1: Flashing lights (default)
- Mode 2: Always on
- Mode 3: LED Off
- Camera Wifi: With the camera on, press and hold the camera button until you hear two short beeps. Turn on your mobile phone and search for a network named similar to “T03_xxxxxxxxx”. Connect to this network using the password 12345678. Open the RICAM APP on your mobile phone.
- Live View and Recording: Within the RICAM APP, select the white button in the Recording instrument section to connect to the camera. You will see a live view of the camera. Use the round button at the bottom of the page to start and stop recording. The red record circle will flash in the top left corner when in recording mode. Battery level status and an icon to enlarge the screen size to landscape mode are also displayed.
- Viewing Photos: Select “Images” to view all of your photos. They can be saved to your mobile device.
- Settings: To access settings, select the cog image in the top right corner. The following settings are available:
- Sound Recording: Turn sound on/off
- Timing Watermark: Turn the date/time off on your recording
- Motion Detection: Turn on/off
- Sensor Mirror: Mirror the live view if using as a rear view mirror
- Cycle Recording Time: Set loop record settings (1, 3, 5, or 10-minute segments) or turn loop off
- G Sensor Sensitivity: Off, low, medium, or high
- Video Resolution: Choose between 1080FHD, 720P, or WVGA
- Photo Resolution: Select from 12M, 10M, 8M, 5M, 3M, or VGA
- Language: Select desired language
- WDR (Wide Dynamic Range): Turn on/off
- Light Freq: Select 50Hz for UK
- Parking Monitor: Choose between off, low, middle, or high
- Total Capacity of SD Card
- Available Capacity Left on SD Card
- Restore Factory Settings
- Firmware Version (e.g., T04)
- Charging: Connect the camera to a USB charger (mains or power bank). It will not fully charge when connected to a laptop or computer. The red LED will flash slowly during charging and turn off when fully charged. Charging time is approximately 2 hours from empty.
Quick Start Guide
- Microphone
- Power Button
- Light Mode Button
- Photo Button/Wifi On/Off
- FHD Camera
- LED Light
- Status Indicator
- Micro SD Card Slot
- Micro USB Charging Port
Note – Please insert Micro SD Card (Max 128gb) before using
Power On/Off
Power ON. Press and hold the power button to turn the camera on. You will hear
3 beeps when successfully turned on, followed by a further one beep to confirm
recording
Status indicator
Will flash red when battery is low. Will flash green when recording
Power Off. Press and hold the power button. You will hear 5 beeps and the
camera will power down
Video Mode
The camera is automatically set to loop recording continuously in 5 minute
segments, at a default 1080P/30FPS. Loop recording when the SD card is almost
full and automatically overwriting the oldest files.
Photo Mode
When powered on, the camera will automatically enter recording mode. To change
it to automatic photo shooting mode (one photo a second), press the camera
button twice. You will two quick beeps to confirm that it is now in photo
shooting mode, at about 1 photo per second. Photo resolution is up to 12M and
can be changed in App settings
LED Light Settings
After powering up, press the light mode button to change the light pattern.
This will not affect the current recording/photo function.
- Mode 1: Flashing lights (default)
- Mode 2: Always on
- Mode 3: LED Off
- Note. The front light is a 400-lumen LED light.
Two Apps are suitable
- APP Store – RICAM
- Google Play – RICAM Pro
App Store & Google Play – Viidure
Turn on the Camera Wifi.
With the camera on, press and hold the camera button until you hear two short
beeps Turn on your mobile phone, and search networks for a name similar to
T03_xxxxxxxxx. Connect to this network by entering password “12345678” . (If
you do not see the network, refresh your phone network listings) Click and
open the RICAM APP icon on your mobile phone. Within Recording instrument
select white button to connect camera You will now see a live view of the
camera. You can stop and start recording with the round button at the bottom
of the page. The red record circle will be flashing in the top left hand
corner of then screen when in recording mode. You will also see battery level
status and also the icon to enlarge screen size to landscape if required
Select Videos to review your files. The file name is the date, time. Loop
video is all of the standard video files and emergency video files were locked
by the G Sensor. (Locked files will not automatically be overwritten by the
camera). You can select any video file and play on your mobile device by on
quick press on the file. If you want to save the video file/s to you mobile
and share press and hold the file, you will then see an orange tick appear..
Select thefile/s required and press the download arrow (bottom right of
screen) and you will now be able to share your saved videos. Note you can also
delete files as well if required Select Images to view all of your photos.
These can also be saved to your mobile device
Settings.
- To enter settings select the Cog image in the top right.. Overview of settings below
- Wifi Name – T03 etc……
- Modify Wifi Password if required
- Sound Recording. Turn sound on/off
- Timing Watermark. Turn the date/time off on your recording
- Motion Detection. Turn on/off
- Sensor Mirror. This will mirror the live view if using as a live rear view mirror
- Cycle Recording Time. Loop record settings. 1, 3, 5 or 10 min segments, or turn loop off
- G Sensor Sensitivity. Off, low medium or high
- Video Resolution. 1080FHD, 720P or WVGA
- Photo Resolution. 12, 10, 8, 5, 3M or VGA
- Language. Select required
- WDR (Wide Dynamic Range). On/Off
- Light Freq. Select 50Hz for UK
- Parking Monitor. Off, Low, Middle or High
- Total Capacity of SD Card
- Available Capacity left on SD card
- Restore Factory Settings
- Firmware Version. T04 etc
Charging
Connect to USB charging (Mains or Powerbank) Will not fully charge connected
to any laptop or computer. The red LED will flash slowly when charging and
will turn off when fully charged. Appx 2 hour charging time from empty. Please
note that the camera can be used for video or photo when in charging mode.
Charge the battery with the supplied charging cable. Do not store at a
temperature over 60’C /140’F
Connecting to a computer via USB data cable
Once you connect the camera with a computer via USB cable, the computer will
recognise and read the Micro SD card, you can then view the videos, images and
download or delete etc
Camera Reset
If camera is not working properly, press the power button and light mode
button simultan eously to power off and restart.
Abnormal Prompt
No card, card error, or other abnormalities: (Will beep 3 times in
succession). Low Battery alert: LED lights switch to constant, will beep 5
times, then powers off. Memory on SD card is low and loop record is switched
off. The camera will beep 8 times and shut down
Frequently Asked Questions
- Q Why won’t the camera turn on?
- A The battery maybe flat. If not try Reset Function
- Q Why am I still not getting a “T03_xxxxxxxxx WiFi signal?
- A Refresh the network list and try again. Make sure your SD card is formatted, or try another SD card
- Q Why won’t my computer recognise the device?
- A Data cable problem. Try another data cable
- Q My SD card is full. How do I delete the old files?
- A The files will get overwritten as it records, except for the “locked” files. Reformat your SD card to delete all files
- Q Why is the camera showing a reverse image?
- A Turn on “Sensor mirror” in the setting, then you may use it as a bike mirror.
- Q How long does this bike light battery last?
- A Appx 4 hours in Led and Recording Mode
Here to Help
- Our friendly customer service team are available to help
- Online Support https://techalogic.co.uk/support/.
- Tel 0330 2233108
What’s in the box
- 1 x Bike Front Light Cam
- 1 x Mount
- 1 x USB Cable
- 1 x Wipe Cloth
- 1 x User Manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>