COSJOYPE D07 Kids Game Smart Watch User Guide
- June 12, 2024
- COSJOYPE
Table of Contents
COSJOYPE D07 Kids Game Smart Watch
Touch instructions: Press the power button to enter the main menu, Swipe left
or right to switchmenus， Swipe up and down or press the touch button to back
to the previous menu
*Note: The factory data in the memory card is very important, do not
delete it, otherwise it will cause the watch can’t work properly.
If the device cannot be turned on or charged, please contact us.
Contact: usvc-[email protected]
Get Started
Power On/Off
Power On: Press and hold the power button
Shutdown: Press and hold the power button
- If the device fails to turn on, this might be caused by a low battery. Please try again after recharging the device for 5 minutes
Charging
Remove the silicone plug on the USB charging port, and then connect the USB
end of the cable to the watch, and the other end to the USB charger.
*After the charger is plugged into the power socket, the power icon at the top right of the screen will start scrolling, indicating that it is in charging mode. The power icon will stop scrolling with a full battery icon when fully charged.
Functions
Camera
In the main menu, slide to select “Camera” and click to enter, you can enter the preview interface, click the left button to take a picture, the right button to enter the image viewer.
Photos
In the main menu, slide to select “Photos” and click to enter, you can view the saved photos.
Video
In the main menu, slide to select “Video” and click to enter, you can enter the preview interface, click the left button to start recording, the right button to enter the video player.
Player
In the main menu, slide to select “Player” and click to enter. After entering, a list of recorded videos will be displayed, select and click to play.
Music
Swipe to select music in the main menu, and click to enter, you can play the downloaded stored music. Note: download *.mp3 format music files to the SD card’s sub-folder /My Music.
How to download Music？
-
After the watch is connected to the computer, the figure shows the phone interface.
-
Select mass storage. At the same time, the computer screen will display the disk icon, indicating that the PC has detected the SD card and is automatically installing the watch driver. Open the disk, you can see that there is music folders in it (As shown in Figure 2):
Recorder
In the main menu, slide to select “Recorder” and click to enter, you can
record.
Note: the recorded audio files will be stored in the SD card’s subfolder
/audio.
Calculator
In the main menu, slide to select “Calculator” and click to enter，you can calculate.
Calendar
In the main menu, swipe to select the calendar, click to enter, you can view the calendar.
Time Tools
In the main menu, slide to select “Time Tools” and click to enter, you can set the alarm, stopwatch and timer.
Alarm
Slide to select “alarm” and click to enter. Click the time on the left to enter the interface for setting the alarm time, swipe up or down to select the time, and press OK to set it.
Click the button on the right to turn the alarm on or off. You can set 13 alarms, such as wake up, brush your teeth, have breakfast, etc.
Stopwatch
Slide to select “stopwatch” and click to enter. Click the Start button on the right to start the stopwatch. Click the pause button to stop the timing. Click the reset button on the left to return the stopwatch to zero.
Timer
Slide to select “Timer” and click to enter. Click the time in the middle to enter the time setting interface, swipe up or down to select the time, and press OK to set.
Click the Start button to start the timing, click the Pause button to stop the timing, click the reset button to stop the timing, and resume to the default 10 minutes.
Torch
In the main menu, slide to select “Torch” and click to enter. The flashlight can be turned on and off as needed, and be careful not to illuminate the eyes directly.
Pedometer
In the main menu, slide to select “Pedometer” and click to enter, You can choose to open, close and clear. After turning on the Pedometer, the system will automatically record the number of steps perday.
26 Games
Settings
Swipe to select “Settings” in the main menu ,click to enter, The following items can be set in the settings.
Theme
Slide to select “theme” and click to enter. Swipe left or right, you can change to the preset theme.
Date
Slide to select “date” and click to enter. Swipe up or down, You can set the date of the watch.
Time
Slide to select “Time” and click to enter. Swipe up or down, You can set the time of the watch.
Time Format
Slide to select “Time Format” and click to enter. You can set the time format to 12 or 24 hours..
Advanced
Slide to select “advanced” and click to enter. you can set the language,
memory, reset wallpaper andreset watch.
Slide to select “language” and click to enter. You can set 6 different
languages.
Slide to select “memory” and click to enter. You can view the memory.
Slide to select “reset wallpaper” and click it. You can reset the wallpaper.
Slide to select “reset” and click it. You can restore settings and restart the
watch.
Parental control
Slide to select “parental control” and click to enter.
- Period Setting
Select “period setting” to enter, you can set the start and end time periods, Two time segments can be set.
- Day Settings
Set the date when the function needs to be opened.
- on-off
You can set the switch, when the switch is turned on, the game will be disabled during the time period of the set date.
Brightness
Slide to select “brightness” and click to enter. You can set the brightness and backlight time of the watch.
Volume
Slide to select “volume” and click to enter. You can adjust the volume level, and turn it to the lowest to mute.
- Please check the contents of the checklist carefully. If any of them is missing or mismatched, please contact the seller in time. Thank you for choosing our product!