polarpro Helix MagLock VND-25 Filter System VND Kit User Guide

: June 12, 2024
: polarpro

Table of Contents

polarpro Helix MagLock VND-25 Filter System VND Kit
Product Information
HELIX FILTERS & COMPONENTS
What’s Included
HELIX FILTERS & COMPONENTS
Base Plates
INSTALLATION
REMOVAL
Filters
INSTALLATION
REMOVAL
More Info
Read User Manual Online (PDF format)
Download This Manual (PDF format)

polarpro Helix MagLock VND-25 Filter System VND Kit

Product Information

What’s Included
Available Kits / Filters / Components.

HELIX FILTERS & COMPONENTS

VND 2-5 Kit
VND 2-5 Filter I 77mm Base Plate I 82mm Base Plate I Defender Caps (Front & Rear) Base Plate Defender Cap

VND 2-5 Filter
VND 2-5 Filter I Defender Caps (Front & Rear)

VND 6-9 Filter
VND 6-9 Filter I Defender Caps (Front & Rear)

VND 2-5 Mist Filter
VND 2-5 Mist Filter I Defender Caps (Front & Rear)

VND 6-9 Mist Filter
VND 6-9 Mist Filter I Defender Caps (Front & Rear)

Mist Filter
Mist Filter I Defender Caps (Front & Rear)

Mist Heavy Filter
Mist Heavy Filter I Defender Caps (Front & Rear)

What’s Included

Available Kits / Filters / Components.

HELIX FILTERS & COMPONENTS

Blue Morphic Filter
Blue Morphic Filter I Defender Caps (Front & Rear)

GoldMorphic Filter
GoldMorphic Filter I Defender Caps (Front & Rear)

Base Plates (All Sizes)
Base Plate I Base Plate Defender Cap

Base Plates

Installing the Helix Base Plates

INSTALLATION

Step 1
Install the correct size Base Plate on your lens by threading on until secure.
Step 2
Install the Base Plate Defender Cap on your Base Plate to keep your lens protected when no filter is installed by aligning the white lines on the push tabs with the tan lines on the Base Plate.
Step 3
Once aligned, the Defender Cap will magnetize and snap to the Base Plate. Once seated, rotate the Defender Cap clockwise until it locks into place.

REMOVAL

Step 1
To remove the Defender Cap, simply squeeze the tabs and rotate counter- clockwise until the push tabs line up with the tan lines on the Base Plate. Once aligned, continue to depress the tabs and pull to remove.

Filters

How to use Helix filters.

INSTALLATION

Step 1
First, remove the Rear Defender Cap from the Filter by squeezing the tan Filter push tabs and rotating counter-clockwise until the push tabs line up with the white marks on the Rear Defender Cap. Once aligned, continue to depress the tabs and pull to remove.
Step 2
Simply align the tan Filter push tabs with the tan lines on the Base Plate.
Step 3
Once aligned, the Filter will magnetize and snap to the Base Plate. Once seated, rotate the filter clockwise until it locks into place. Follow the same steps above to remove the Front Defender Cap and get shooting!

REMOVAL

Step 1
To remove the Filter from the Base Plate, simply squeeze the tan push tabs and rotate counter-clockwise until the tabs line up with the tan lines on the Base Plate. Once aligned, continue to depress the tabs and pull Filter to remove.