Sanpu PC-35-12-24 Switching Power Supply 35W 12V 24V IP40 Dustproof Instruction Manual
- June 12, 2024
- SANPU
Table of Contents
Sanpu PC-35-12-24 Switching Power Supply 35W 12V 24V IP40 Dustproof
Product Information
The Switching Power Supply 35W 12V 24V IP40 Dustproof (Product Code:
PC-35-12/24) is a high-efficiency power supply with a single output. It is
designed to convert 100-240V AC input into either 12V
or 24V DC output. The power supply has a plastic housing and a class II
design, making it safe to use. It is CE and FCC-certified and comes with a
3-year warranty.
Features
- 100-240V AC input
- Single Output
- 90% high efficiency
- 100% full load burn-in test
- Protection: OTP (Over Temperature Protection), OLP (Overload
- Protection), OVP (Over Voltage Protection), SCP (Short Circuit Protection)
- Plastic housing and class II design
- CE and FCC-Certified
- 3-year warranty
Specifications
Product Code| DC Voltage| Rated Current| Current Range| Output Voltage
Tolerance| Rated Power| Ripple & Noise
---|---|---|---|---|---|---
PC-35-12| 12V| 3A| 0~3A| +/-5%| 35W| —
PC-35-24| 24V| 1.5A| 0~1.5A| +/-5%| 35W| —
Product Usage Instructions
To use the Switching Power Supply 35W 12V 24V IP40 Dustproof, Please follow
these instructions:
- Make sure the input voltage is within the range of 100-240V AC.
- Connect the power supply to the appropriate power source.
- Select the desired output voltage by choosing either the 12V or 24V option.
- Ensure that the load current does not exceed the rated current for the selected output voltage.
- Connect the load device to the output terminals of the power supply.
- Double-check all connections to ensure they are secure.
- Power on the power supply using the designated switch or button.
Note : The power supply is equipped with various protection features such as Temperature Protection (OTP), Overload Protection (OLP), overvoltage protection (OVP), and Short Circuit Protection (SCP). These protections help safeguard the power supply and connected devices from potential damage. If any of these protections are triggered, please refer to the user manual for troubleshooting steps or contact customer support for assistance.
- Features:100-240V AC input
- Single Output
- 90% high efficiency
- 100%full load burn-in test
- Protection: OTP, OLP, OVP, SCP
- Plastic housing and class II design
- CE FCC Certified
- 3-year warranty
Specification
| Product Code | PC-35-12 | PC-35-24 |
|---|
Output
| DC Voltage| 12V| 24V
Rated Current| 3A| 1,5A
Current Range| 0~3A| 0~1,5A
Voltage tolerance| ±5%| ±5%
Rated Power| 35W| 35W
Ripple & Noise| <120mVp-p| <240mVp-p
Start up time| <1500ms, 30ms / 230VAC
Input
| Input voltage range| 100-240 VAC
Frequency Range| 50~60Hz
AC Current| 0,31A / 230VAC
Efficiency| 88%| 90%
No load consumption| <0.5W
Protection
| ****
Over Load
| Above 110%-150% of rated power
Shut-down output voltage, auto recovery after fault condition is removed
Over Voltage
| Above Max. Voltage (105% of rated voltage)
Shut-down output voltage, auto recovery after fault condition is removed
Over Temperature
| Over 130°C detected on main IC control
Shut-down output voltage, auto recovery after fault condition is removed
Ambiant
| Working Temp. & humidity| “-20°C~+60°C, 20%~90%RH
Storage temp. & humidity| “-40°C~+85°C, 10%~95%RH
Tesings
| Withstand voltage| I/P-O/P: 3KVAC/1min; I/P-F/G: 1.5KVAC/1min; O/P-F/G:
0.5KVAC/1min;
Safety| GB4943 ;EN62608-1
EMC
| EN55032:2015/AC:2016 EN61000-3-3:2013 EN55024:2010+A1:2015
Other
| Lifespan| 20000hrs
Dimension(LWH)| 1453822mm (LWH)
Packing| 0.15kg/pcs, 100pcs/16kg/CTN
Note
| 1, The above-mentioned data were measured at 230VAC input and 25°C. 2, Disconnect the AC input before checking any mal-phenomenons.
3, Make sure the INPUT &OUPUT were in right situation before connecting to power supply. 4, Datesheet for reference only. We suggest you take sampling before mass orders.
Block Diagram
Mechanical Specification
Temperature Derating Curve
Output Load VS Input Voltage
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>