IKEA 704.763.63 RINNIG Oven Glove Instructions

: June 12, 2024
: Ikea

Table of Contents

IKEA 704.763.63 RINNIG Oven Glove
Product Information
Product Usage Instructions
Designation
Use
Relevant applicable European standards
Hyväksytty toimija
Performance levels
Limitations
Number of cleaning cycles
Approved body
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

IKEA 704.763.63 RINNIG Oven Glove

Product Information

Product Name: RINNIG
Product Code: 704.763.63
Designer: Hannah Wilcox
Size: One size

Designation: Oven glove for private use, Risk category II as per EU Regulation 2016/425, and UK 2019 S1696 Schedule 35 Regulation 38

Relevant Applicable European Standards:

This oven glove is designed to offer protection against contact heat, at performance level 2, and complies with relevant requirements in EN ISO 21420:2020 and EN 407:2020.

Limited Flame Spread: X

Contact Heat: 2

Convective Heat: X

Radiant Heat: X

Small Splashes of Molten Metal: X

Large Quantities of Molten Metal: X

Approved Body:

UK: ITS Testing Services (UK) Ltd, Centre Court, Meridian Business Park, Leicester, LE19 1WD, Approved Body no AB0362.

Product Usage Instructions

The RINNIG oven glove is designed to be worn for protection against thermal risks associated with removing hot items from ovens (contact heat) typically used in a domestic environment.
The oven glove is intended to be used in dry conditions. Before each use, inspect the glove for any damage. If damaged, replace the glove.
Keep the oven glove away from naked flames and fire.
The oven glove protects only the area of the hand covered by the glove while in use.
The acceptable number of cleaning cycles following the provided care instructions is 5. However, the lifetime of the product depends on usage, care, storage, and other factors in addition to the number of cleaning cycles.
For more information and the Declaration of Conformity for this product, visit IKEA.com, search for your article number, and find the document under Assembly & documents.

This oven glove has been tested in accordance with EN ISO 21420: 2020, EN 407: 2020, Regulation (EU) 2016/425 and UK 2019 S1696 Schedule 35 Regulation 38.

Designation

Oven glove for private use, Risk category II as per EU Regulation 2016/425, and UK 2019 S1696 Schedule 35 Regulation 38.

Use

The oven glove is designed to be worn for protection against thermal risks associated with removing hot items from ovens (contact heat) of the types usually used in domestic environment.
The oven glove is intended to be used in dry condition.
Glove should be inspected prior to each use and damaged gloves should be replaced.

Size
One size.

Relevant applicable European standards

This oven glove is designed to offer protection against contact heat, at performance level 2, and complies with relevant requirements in EN ISO 21420: 2020 and EN 407:2020.

Limited flame spread: X
Contact heat: 2
Convective heat: X
Radiant heat: X
Small splashes of molten: X
Large quantities of molten: X
X is used for tests that where not tested.

Hyväksytty toimija

Iso-Britannia: ITS Testing Services (UK) Ltd, Centre Court, Meridian Business Park, Leicester, LE19 1WD. Hyväksyntä nro AB0362.

Performance levels

Contact heat: performance 2 (threshold time minimum 15 s when exposed to a temperature of 250°C).
The oven glove is not specifically designed to offer protection for limited flame spread, convective heat, and radiant heat, small splashes of molten metal and large quantities of molten metal.

Limitations

Keep away from naked flame and fire.
The oven glove protects only the area of the hand covered by the glove while in use.

Number of cleaning cycles

The acceptable number of cleaning cycles following the provided care instructions: 5.
The stated acceptable number of cleaning cycles is not the only factor related to the lifetime of the product. The lifetime also depend on usage, care, storage, etc.

Notified body
EU: INTERTEK ITALIA SPA
Via Guido Miglioli, 2/A – 20063 Cernusco sul Naviglio (MI) – Italia (2575)

Approved body

UK: ITS Testing Services (UK) Ltd, Centre Court, Meridian Business Park, Leicester, LE19 1WD, Approved Body no AB0362.
To view the Declaration of Conformity for this product go to IKEA.com, search your article number and find the document under “Assembly & documents”.