polysan MN001 Eccentric Bathtubs Instruction Manual
- June 12, 2024
- Polysan
Table of Contents
polysan MN001 Eccentric Bathtubs
Product Information
- Product Model: PO60-60
- Product Model: PO80-80
- Product Model: PO100-100
- Product Model: PO60-80
- Product Model: PO60-100
- Quantity: 4x
- Quantity: 8×40
- Quantity: 4x
- Quantity: 4x
- Quantity: 4×40
- Quantity: 2x
- Quantity: 12x
- Quantity: 4×11
- Quantity: 4x M12x125mm
- Quantity: 12x M12
- Material: SILICONE
- Version: MN001/2021/01/N10000/1.21
- Quantity: 1
- Quantity: 2
- Quantity: 3
- Quantity: 4
- Quantity: 12x
- +2 – 6 mm
- Material: SILICONE
- Quantity: 5
- Quantity: 6
- Warning Symbol (!)
- Warning Symbol (!)
- Quantity: 4×11
- Fits panel size: 110-190mm
- Quantity: 7
- Quantity: 8
- Quantity: 2
- b = 17
- a = b + 17
- Quantity: 10
- Quantity: 11
- Quantity: 12
- OK
- NO
- Quantity: 13
- Quantity: 14
- Quantity: 3
- Quantity: 3
- a) Quantity: 15
- b) Quantity: 16
- Material: Acrylic panel
- Material: Acrylic panel
- Material: SILICONE
- a) Quantity: 17
- b) Quantity: 18
- Drying Time: 24 hours
- Art.no. 91020
- Material: SILICONE
- Quantity: 4
Product Usage Instructions
- Ensure that you have the correct model of the product (PO60-60, PO80-80, PO100-100, PO60-80, or PO60-100) for your specific requirements.
- Check the quantity of each component included in the package.
- If there are any warnings indicated by the exclamation symbol (!), pay attention to them and follow the provided instructions.
- For components with specific dimensions, such as M12x125mm or +2 – 6 mm, ensure that they are used according to the specified measurements.
- When using SILICONE material, follow the recommended guidelines for its application and usage.
- If there are any specific instructions related to a=b+17 or other mathematical calculations, ensure that you understand and apply them correctly.
- For Acrylic panel components, make sure they fit within the specified panel size range of 110-190mm.
- Refer to quantities and steps mentioned in the instructions (e.g., steps 9, 10, 11, etc.) for proper assembly or installation.
- When using the product, confirm if the OK or NO indicators are relevant to your situation and act accordingly.
- Follow any additional instructions provided for drying time (e.g., 24 hours) when using SILICONE material.
- Refer to the provided Art.no. 91020 for any specific information related to the product.
PRODUCT EXPLODED VIEW
TOOLS NEEDED
INSTALLATION INSTRUCTION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>