i-PRO WV-Q123A Attachment Pipe Bracket Instruction Manual
- June 12, 2024
- i-PRO
Table of Contents
i-PRO WV-Q123A Attachment Pipe Bracket
Product Information
Model No.| Supported Cameras| Ambient Operating Temperature| Dimensions| Mass|
Finish
---|---|---|---|---|---
WV-Q123A| 40A, R 1-1/2, 11 crest| N/A| N/A| N/A| N/A
WV-Q179| 40A, Rp 1-1/2, 11 crest| N/A| N/A| N/A| Light gray
WV-QAT500-W| {1-3/16 inches} or more (taper pipe thread)| N/A| N/A| N/A| i-PRO
white
WV-QAT501-S| 40A, NPT 1-1/2, 11.5 crest| N/A| N/A| N/A| N/A
WV-QAT501| {1-3/16 inches} or more (taper pipe thread)| N/A| N/A| N/A| N/A
Product Usage Instructions
- Prepare the mount bracket (locally procured) for mounting the camera.
- Fix the product to the mount bracket. Fill the gap between the mount bracket and the product with waterproof material (locally procured) such as silicon clay.
- Fix the mount bracket (locally procured) on the installation surface.
- Pass the cables through the mount bracket and the product.
Standard Accessories:
- Operating Instructions (1 pc.)
- Camera mounting screw (hexagon screw (M6)) (5 pcs., 1 for spare)
Other items that are needed (not included):
- Mount bracket (locally procured) – 1 set
Precautions:
-
Refer installation work to the dealer. Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
-
Do not use this bracket except with specified cameras. Failure to observe this may cause a drop resulting in injury or accidents.
-
When using this product, also read the Precautions described in the operating instructions for the camera to be attached.
-
In order to prevent injury, the product must be securely
mounted to the mount bracket (locally procured) according to the Installation Guide of the camera. -
This product is designed to be used as a pendant mount camera. If the product is mounted on a desktop or at a slant, it may not work correctly and its lifetime may be shortened. Make sure to remove this product if it will no longer be used.
Attachment Pipe Bracket
Model No.
- WV-Q123A
- WV-Q179
- WV-QAT500-W
- WV-QAT501-S
- WV-QAT501
Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use. The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.
Precautions
Refer installation work to the dealer.
Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
Do not use this bracket except with specified cameras.
Failure to observe this may cause a drop resulting in injury or accidents.
When using this product, also read the “Precautions” described in the
operating instructions for the camera to be attached.
Preface
This product is used to mount the camera on a locally procured mounting
bracket.
The latest information about the supported cameras
Specifications
- Ambient operating temperature : –50 °C to +60 °C {–58 °F to +140 °F}
- Dimensions : ø58 mm × 85 mm (H) {ø2-9/32 inches × 3-11/32 inches (H)}
- Mass : Approx.200 g {0.44 lbs}
- Finish : Aluminum alloy Silver (WV-Q123A, WV-QAT501-S Light gray (WV-Q179) i-PRO white (WV-QAT500-W, WV-QAT501
Precautions for installation
- In order to prevent injury, the product must be securely mounted to the mount bracket (locally procured) according to the Installation Guide of the camera.
- Mounting method for this product This product is designed to be used as a pendant mount camera. If the product is mounted on a desktop or at a slant, it may not work correctly and its lifetime may be shortened.
- Make sure to remove this product if it will no longer be used.
Standard Accessories
- Operating Instructions (this document): 1 pc.
- Camera mounting screw (hexagon screw (M6): 5 pcs.(of them, 1 for spare)c
Other items that are needed (not included)
- Mount bracket (locally procured): 1 set
Installation
The following explains an example of mounting the camera on a ceiling
Preparations before installation
Prepare the mount bracket (locally procured) for mounting the camera.
IMPORTANT: The mounting bracket (locally procured) should have the configuration that enables the fixation of safety wire from camera.
| A | B |
|---|
WV-Q123A WV-Q179
WV-QAT500-W
| 40A, R 1-1/2, 11crest length 30 mm
{1-3/16 inches} or more
(taper pipe thread)
| 40A, Rp 1-1/2, 11 crest deep MAX. 30 mm
{1-3/16 inches}
(parallel thread)
WV-QAT501-S WV-QAT501| 40A, NPT 1-1/2, 11.5 crest
length 30 mm
{1-3/16 inches} or more (taper pipe thread)
| 40A, NPSC 1-1/2, 11.5 crest
deep MAX. 30 mm
{1-3/16 inches} (parallel thread)
Fix this product to the mount bracket (locally procured).
- Fix this product to the mount bracket.
- Fill the gap between the mount bracket and this product with waterproof material (locally procured) such as silicon clay.
Fix the mount bracket (locally procured) on the installation surface
- Pass the cables through the mount bracket and this product.
- Fix a mounting bracket to the installation surface by using appropriate bolts, nuts or the like (locally procured).
IMPORTANT:
- For details on procedure for attaching mount bracket, read the operating instructions of mount bracket.
- After waterproofing the hole for fixing mount bracket and the port for pulling out the cable on the installation surface, fix the mount bracket on the installation surface.
- Ensure the minimum pull-out strength that has sufficient allowance for total mass of mount bracket, this product, and camera etc.
Attach the camera to this product
Connect each cable to the camera, and attach the camera to this product with the camera mounting screw (accessory) or the hexagon screw supplied with the camera. Refer to the Installation Guide of the camera for details such as the recommended tightening torque for the camera mounting screws.
i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation, operation inconsistent with this documentation or through use of parts other than this product, such as locally procured parts.
“<Control No.: C****>” used in these documents should be used to search for information on our technical information website (https://i-pro.com/global/en/surveillance/trainingsupport/support/technical- information) and will guide you to the right information
i-PRO Co., Ltd. https://www.i-pro.com/
© i-PRO Co., Ltd. 2022
Ns0522-0
Printed in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>