USA SPEC BT45-FORD2 Bluetooth Audio Interface User Manual

USA SPEC BT45-FORD2 Bluetooth Audio Interface

Product Information

The FORD/LINCOLN/MERCURY with SAT is an innovative Bluetooth music & phone interface. It is designed to provide seamless connectivity between your vehicle’s audio system and your Bluetooth-enabled devices such as iPhone, iPad, iPod Touch, Android smartphones & tablets, Windows smartphones & tablets, and Blackberry. The BT45-FORD2 package includes all the necessary components for installation and operation.

Compatibility Information

The BT45-FORD2 is compatible with most Bluetooth wireless technology enabled devices currently on the market. However, please note that some Bluetooth enabled devices may be incompatible or may not support all of BT45’s features due to differences in Bluetooth technology.

In order to use the music info display feature on your radio, your device must meet the following requirements:

1. Your device’s operating system: iOS 6 or higher, Android 4.0 (Ice Cream Sandwich) or higher
2. Your device’s Bluetooth profile: AVRCP 1.4 or higher
3. Music/media app: text display capabilities of music/media streaming apps can vary, thus some might not display properly on your radio

For vehicle compatibility, please refer to the table below for the specific models, years, radio types/buttons, and SAT radio receiver locations:

button. Underneath the
spare tire cargo tray: the cover & sill trim must be removed
first
Escape| 2007| Navigation radio only| Under the front passenger seat
Expedition| 07 – 09| All radios| In the center console
Explorer| 06 – 09| All radios| Inside the passenger side’s kick panel
F150| 2005 06 – 08| All radios| Underneath the radio
F250 / F350| 07 – 08 2009| All radios| Non navigation radio only with AUX/TEXT button. On the bottom
left side of the steering wheel column: underneath the plastic
cover
2005 Five Hundred| 06 – 07| All radios| In the trunk, behind the carpet panel of passenger side
fender

Please note that vehicles without SAT/XM (Satellite radio) receiver should use the BT45-FORD1 package. For photos of SAT receiver locations, please visit the BT45-FORD2 product page.

Product Usage Instructions

1. Ensure that your vehicle’s radio is turned off.
2. Locate the SAT radio receiver in your vehicle using the provided information in the compatibility table.
3. If necessary, remove any covers or trim to access the SAT radio receiver.
4. Connect the BT45-FORD2 interface to the SAT radio receiver using the appropriate connectors.
5. Turn on your vehicle’s radio and select the SAT radio mode.
6. Pair your Bluetooth-enabled device (e.g., smartphone, tablet) with the BT45-FORD2 interface following the instructions provided in your device’s user manual.
7. Once paired, you can now stream audio from your device to your vehicle’s audio system. Use the controls on your device or the radio buttons to play, pause, skip tracks, and adjust volume.
8. If your device supports music info display, ensure that it meets the requirements mentioned in the compatibility information section. The artist, album, and song title information will be displayed on your radio.

For any technical support or warranty services, please contact an authorized USA SPEC dealer. A list of authorized dealers can be found on the USA SPEC website.

PRODUCT OVERVIEW

The BT45 seamlessly integrates your vehicle’s OEM sound system with Bluetooth (HFP) devices for hands- free phone calls and media streaming. You can wirelessly connect your A2DP Bluetooth profile equipped smartphone or tablet to play stored music or stream the audio from your favorite media apps such as, iHeart Radio,Pandora, Spotify, and YouTube. The built in echo & noise cancellation feature will give you crystal clear sound quality on your hands free phone calls. The all-speaker playback feature will give you a rich & dynamic music streaming quality. The BT45 has an additional 3.5 mm auxiliary audio port and a USB charging port so you can play music stored in your non- Bluetooth devices and keep your device charged and ready to go. The BT45’s plug & play technology takes advantage of the OEM radio’s ability to accept an external CD changer or Satellite Radio by converting it into Bluetooth phone/audio streaming/AUX input  source. This design innovation allows you to maintain functionality of existing factory installed options such as, OnStar Navigation, CD changer, Satellite radio, RSE (rear seat entertainment system), and AUX/USB input.

NOTICE
USA SPEC solely distributes its products through authorized dealers in order to ensure its customers receive proper services and information from the dealers. USA SPEC reserves the right to only offer technical support or warranty services for products purchased through authorized USA SPEC dealers. Please refer to our website www.usaspec.com for a list of authorized dealers.

INSTALLATION & OPERATION PRECAUTIONS

• DO read the entire manual before starting the installation. We recommend that the BT45 be installed by a qualified professional since all installations will require the removal of some parts of the vehicle such dashboard, backseat, etc.
• DO install the interface securely using Velcro or wire ties (not included) and keep away from any moving parts such as the gas pedal.
• DO NOT open, disassemble, or modify the BT45 in any way. Such attempts will void the warranty on the product.
• DO NOT expose the interface to extreme temperature, humidity, or direct sunlight.
• DO NOT operate the Bluetooth device while driving. Always give full attention to the road while driving.

BT45-FORD2 PACKAGE CONTENT

• 1 Product Manual
• 1 BT45-FORD2 module
• 1 BT-FORDx cable
• 1 MIC45 microphone

COMPATIBILITY INFORMATION

Bluetooth Device Compatibility
BT45 is compatible with most Bluetooth wireless technology enabled devices currently on the market such as iPhone, iPad, iPod Touch, Android smartphones & tablets, Windows smartphones & tablets, and Blackberry. Devices must have Bluetooth profile A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile) 1.4 or higher for audio streaming and text display.
Note: Due to the difference in Bluetooth technology, some Bluetooth enabled devices may be incompatible or may not support all of BT45’s features.
Device Compatibility for Music Info Display
The display of artist, album, and song title information on the radio is determined by the following 3 factors

1. Your device’s (smartphone) operating system: iOS 6 or higher, Android 4.0 (Ice Cream Sandwich) or higher
2. Your device’s Bluetooth profile: AVRCP 1.4 or higher
3. Music/media app: text display capabilities of music/media streaming apps can vary thus some might not display properly on your radio
   • Please see p.10 on how to operate music info display on your Ford radio

Vehicle Compatibility

Ford
__

__

Edge

| 07 – 08| All radios| Underneath the spare tire cargo tray: the cover & sill trim must be removed frist
__

09 – 10

| Non navigation radio only

with AUX/TEXT button

Escape| 2007| Navigation radio only| Under the front passenger seat
Expedition| 07 – 09| All radios| In the center console
Explorer| 06 – 09| All radios| Inside the passenger side’s kick panel
F150| 2005| All radios| Underneath the radio
06 – 08| All radios
__

__

F250 / F350

| 07 – 08| All radios| On the bottom left side of the steering wheel column: underneath the plastic cover
__

2009

| Non navigation radio only

with AUX/TEXT button

__

Five Hundred

| 2005| All radios| In the trunk, behind the carpet panel of passenger side fender
06 – 07| All radios
(1)   Vehicles without SAT/XM (Satellite radio) receiver please use the BT45-FORD1 package

(2)   For photos of SAT receiver locations please see under the “DETAILS” tab of the following linked page. https://www.usaspec. com/p-319-bt45-ford2.aspx

__

FreeStyle

| 2005| All radios| In the trunk, behind the carpet panel of
07 – 08| All radios
__

__

Fusion

| 06 – 08| All radios| passenger side fender Passenger side:

behind the rear-seat side bolster: need to remove rear seat

bottom & side bolster

__

2009

| Non navigation radio only

with AUX/TEXT button

Mountaineer| 06 – 09| All radios| Inside the passenger side’s kick panel
__

Mustang

| __

06 – 09

| __

All radios

| In the trunk, behind the carpet panel of passenger side fender
Ranger| 07 – 09| All radios| Behind the glove box
Sport Trac| 06 – 09| All radios| Inside the passenger side’s kick pane
(1)   Vehicles without SAT/XM (Satellite radio) receiver please use the BT45-FORD1 package

(2)   For photos of SAT receiver locations please see under the “DETAILS” tab of the following linked page. https://www.usaspec. com/p-319-bt45-ford2.aspx

Lincoln
MKx| 07 – 08| All radios| Passenger side: behind the rear-seat side bolster: need to remove rear seat

bottom & side bolster

__

__

MKz

| 07 – 08| All radios
__

2009

| Non navigation radio only

with AUX/TEXT button

Navigator| 07 – 09| All radios| In the center console
Mercury
__

__

Milan

| 06 – 08| All radios| Passenger side: behind the rear-seat side bolster: need to remove rear seat

bottom & side bolster

__

09

| Non navigation radio only

with AUX/TEXT button

(1)   Vehicles without SAT/XM (Satellite radio) receiver please use the BT45-FORD1 package

(2)   For photos of SAT receiver locations please see under the “DETAILS” tab of the following linked page. https://www.usaspec. com/p-319-bt45-ford2.aspx

DIP SWITCH SETTINGS

• Set the dip switches located on the interface module to:
  • 1-ON, 2-ON, 3-ON, 4-OFF
  • Dip switch down position = ON

INSTALLATION

Installation Instructions

• We recommend that the BT45 be installed by a qualified professional since all installation will require the removal of some parts of the vehicle such as the dashboard, backseat, etc.

Diagram A: Cable Connection

• The below representations of the radio and cables are generalized depictions and are not to scale.

Step 1: Locate the factory SAT radio receiver and unplug the main 12-pin cable from the receiver.

Diagram A: (continued from

Step 4: Connect the 18-pin black Molex end of the BT-FORDx cable to the interface module. * Dip switch down position = ON. See p.5 for setting.

Diagram B: Recommended Microphone Locations

BLUETOOTH SETUP

Bluetooth Device Pairing Instructions

1. Turn your vehicle’s ignition ON and make sure the radio is turned on
2. Press the “AUX” button until the radio switches to SAT1 mode.
3. The radio will display “BT45 #####-####”
4. Enable the Bluetooth function on your device (phone)
5. Scan/search for available device from your phone. It may take up to 30 seconds for your phone to locate the BT45
6. Select BT45-FORD from the list of available devices your phone has detected.
7. Allow the pairing process to take place
8. Once pairing is complete you will hear the “CONNECTED” voice prompt from your vehicles’ audio system and the radio will briefly display the name of your phone, i.e. USA SPEC TEST PHONE.

Switching Audio Source: from AM/FM, CD to Bluetooth Source

1. Once the BT45 is connected,SAT1 audio sources will become the Bluetooth audio source. SAT2 & SAT3 will remain as factory Satellite radio source.
2. Press the “AUX” button to cycle through the audio source until you reach SAT1: BT45 Bluetooth audio source.

MEDIA STREAMING

• If you have music stored in your device, it will begin to play right after the “CONNECTED” voice prompt. If playback does not start automatically, turn the radio TUNE knob to the right or press the SEEK UP button. You can also proceed to manually start playback on your device from your preferred media app such as Pandora, YouTube, or Podcast app.

Music Info Display

• While your music is playing SHORT press the “TEXT” button to cycle through the different text fields such as artist, album, and song title. The default display is song title.
  Note: some radios have the TEXT option on the PRESET 6 button. If the TEXT/PRESET 6 button is pressed for too long it will result in the radio switching into AUX audio source mode.

• The BT45 will assign track numbers to the currently playing audio tracks if your radio is unable to display music info due to device’s compatibility (see p.2 for details)

Music Playback Control
Next & Previous Track

1. From the radio: Press the
2. From the steering wheel: press & hold the ◀SEEK or SEEK buttons. Some vehicle’s steering wheel SEEK buttons are designed to perform PRESET changes and can not be used for track changes.

Pause & Play

1. Pause the media streaming directly from your device (phone)
2. Radio display will say [PAUSED]
3. To resume streaming: press the SEEK radio or the steering wheel

Volume Up/Down

1. From your device (phone) set the MEDIA volume to MAX
2. While streaming music, use the volume control on the radio or the steering wheel to adjust the streaming volume to the desired level.

PHONE CALLS

Answer and End Calls
When there is an incoming call:

1. You must manually switch to Bluetooth audio source (SAT1) by pressing the AUX button.

2. Once you are in the Bluetooth source (SAT1) you will hear the caller’s number announced through the vehicle’s sound system (you will hear “PRIVATE” if caller ID is not available). If the voice prompt features is disabled, then you will only hear the phone’s ringtone. See p.13 on how to enable/disable the voice prompt feature.
   Answer Calls

3. From the radio: press the SEEK ▶button or the▲button(located on the upper right corner of the radio)
   From the steering wheel: press & hold the SEEK▶button
   End or Reject Calls

4. From the radio: press the ◀SEEK button or the▼button(located on the upper right corner of the radio)

5. From the steering wheel: press & hold the◀SEEK button

6. Once a call has ended, the radio will remain in the Bluetoothsource (SAT1), you must manually select the source you wishto go back to (i.e. AM/FM, CD, or SAT).

Make Calls

1. Make sure you are in the Bluetooth audio source (SAT1)
2. Dial calls directly from your phone
3. OR use your phone to engage its voice dialing function such as Siri, Google Assistant, and Cortana. Once engaged, your voice command will be picked up by the BT45’s microphone (*).
4. Press the ◀ SEEK or the ▼ button to end the call
   • Please keep in mind that the environment inside a moving vehicle tends to be noisier than your average environment. This will affect how accurately your phone’s voice recognition function such as Siri picks up your voice command.

Hands-free to Handset
Transferring an active call from hands-free to Handset

1. While on a call, press the SEEK ▶ or ▲ button to transfer the call from hands-free to handset
2. Press the SEEK ▶ or ▲ button again to transfer the call back to hands-free mode

ENABLE & DISABLE VOICE PROMPT

1. Turn your vehicle’s ignition ON
2. Go to Bluetooth source (SAT1)
3. Disable the Bluetooth function from your phone’s setting
4. Wait 5 seconds, press the SEEK ▶ or ▲ button to ENABLE. Press ◀ SEEK or ▼ to DISABLE
5. Enable your phone’s Bluetooth function and reconnect to the BT45. The feature will stay disabled or enabled until you perform the above steps again.
   • The above steps will enable/disable both the voice prompt and the caller # announcement features

AUX PORT

1. You will need a 3.5mm to headphone jack cable (not included in this package)
2. Go to SAT1, then press & hold the PRESET-6 button for up to 3 seconds to access the audio device connected to the AUX port
3. Short press the PRESET 4 button to switch back to Bluetooth audio source
   • Remember to turn the volume from the audio device to MAX first then use the radio/steering wheel’s volume control to adjust to the desired level

USB CHARGING PORT

• USB charging cable is not included in this package
• Maximum charging output: 2.1 amps at 5 volt

FAQS & TROUBLESHOOTING TOPICS

My hands-free phone call volume is very low.

First adjust volume on your phone to MAX then use the radio volume controls to adjust to the desired level.

• I’m unable to pair my smartphone/device.
  1. Delete/forget the BT45 from your phone’s Bluetooth setting. Reset your phone and try the pairing process again.
  2. If you have an Android device, make sure the “Only visible to paired devices” option is UNCHECKED. Sometimes it can take up to 30 seconds for the BT45 to be detected by your smartphone/device.
• My radio is not displaying any music info such as song titles.

Confirm that your device is equipped with Bluetooth profile AVRCP 1.4 or higher, it has iOS 6.0 or higher, or Android 4.0 or higher.
Music streaming apps’ info display capabilities vary thus some might not display properly on your radio.

• Can I still activate the XM subscription and use my XM radio?

CONTACT

For help with any additional issues, please contact tech support at (909)468-3836 Mon-Fri: 9am-5pm PST or e-mail us at info@usaspec.com Additional troubleshooting Q&As are available at http://www.usaspec.com/t-faq.aspx.

LIMITED WARRANTY

Thank you for choosing a USA SPEC product. USA SPEC, Inc., is committed to providing high quality defect-free products. All USA SPEC products are tested before leaving the factory and warranted against defects in materials and workmanship for a period of one year to the original owner. The one-year warranty period begins at the date of purchase from an authorized dealer.

PRODUCTS COVERED:
Products and related accessories supplied by USA SPEC, Inc. with the brand name of USA SPEC are covered by this warranty. Only products purchased in the USA are covered

WARRANTY DOES NOT COVER:

1. Damage due to improper installation or operation, negligence, abuse, or not following instructions, warnings or acceptable industry procedures.
2. Damage caused during the shipment or transportation of the product. All claims of this nature must be presented to the carrier.
3. Damage caused by acts of God, war, or civil disturbance, including without limitation, flood, fire, storms, earthquake or other acts of nature.
4. Any expenses or cost to remove or reinstall products.
5. Any product without the original serial number and factory seal, or has been serviced or modified without the authorization of USA SPEC.
6. Any product not distributed by an authorized USA SPEC dealer.

TO OBTAIN WARRANTY SERVICE:
Contact the Customer Service center for assistance at (909) 468 – 3836. A detailed description of the problem(sA) is required for service. Proof of purchase is also required when sending a product for warranty service. If the problem cannot be resolved and the product must be returned for service, you will receive an authorization form from the service center. The product must be delivered pre-paid to the service center. USA SPEC will, at our option, repair the product or replace it with a new or reconditioned product, and if it was shipped to the service center, the return shipping will be pre-paid free of charge provided the repairs are covered by the warranty. The product must be packed securely for shipment to the service center in order to preserve the warranty and prevent damage.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR USE APPLIES TO THIS PRODUCT AFTER THE ONE YEAR PERIOD AS DEFINED ABOVE, AND NO OTHER EXPRESSED WARRANTY OR GUARANTEE, EXCEPT AS MENTIONED ABOVE, GIVEN
BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BIND THE WARRANTOR. NEITHER THE WARRANTOR NOR ANY OTHER PERSON, FIRM, OR CORPORATION IS RESPONSIBLE FOR LOSSES OR INCONVENIENCES, OR FOR ANY CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, AND SOME DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
This warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state, and province to province. Some of the limitations or exclusions may not apply to you. THE ABOVE WARRANTY TERMS AND CONDITIONS ARE VALID ONLY IN THE U.S.A.

07 – 08: All radios
Escape| 07 Nav only
Expedition| 07 – 09: All radios
Explorer| 06 – 09: All radios
F150| 06 – 08: All radios
05: All radios
F250/350| 2009: Non-Nav only
07 – 08: All radios
Five Hundred| 06 – 07: All radios
05: All radios
Focus| 05 – 07: All radios
FreeStyle| 07 – 08: All radios
06: All radios

06 – 08: All radios
Milan| 09: Non-Nav only
06 – 08: All radios
MKx| 07 – 08:All radios
MKz| 09: Non-Nav only
07 – 08: All radios
Mountaineer| 06 – 09: All radios
Mustang| 06 – 09: All radios
Navigator| 07 – 09: All radios
Ranger| 07 – 09: All radios
Sport Trac| 06 – 09: All radios

• The above application chart is for general reference only. Please check www.usaspec.com to verify specific application. The Ford name and vehicle model names are trademarks owned by or licensed by Ford Motor Company

References

• USA SPEC
• BT45 FAQ and Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>