amazon Smart WiFi Music Starry Projector User Manual

User Manual Smart Wi-Fi Music Star Light

Smart WiFi Music Starry Projector

IF YOU ARE HAPPY WITH OUR SERVICE
YOU ARE UNHAPPY WITH OUR PRODUCT
 E-mail ortfansservice@gmail.com (North America)
AMZfansclub@gmail.com (Europe)
Aftersale website
 http://iort.vip

http://iort.vip/

Unboxing Check

Thank you for purchasing our products, please read the instruction manual carefully before use. Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.

Package list

Music Starry Projector x 1 Remote Controller x 1 USB Cable x 1 User Manual x1
Notice

1. Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
2. This product Is suitable for Indoor use, please do not use laser shone directly In eyes and keep away from children.
3. The product Is projected by LED and laser combinations.
4. This product only supports 2.4GHz Wi-Fi, not 5GHz Wi-Fi.

How to use:

1. Indoor use, projecting in the sky direction.
2. How to use the light projector, as shown below.
3. Connect Bluetooth 11T1(10* of the smart phone to play music
4. Use correct method of the remote control to make sure the remote control is pointing at the infrared sensor that is the ‘Remote Receiving Area on the host.

Warnings: The power requirement of this product is USB DC 5V/2A. This product has been comprehensive and rigorous tested at the factory, the use’ should strictly follow the warning and instructions. Improper use resulting in product damage is not covered by the Company’s warranty.

Produxct Features:

1. Two control modes (Slide to switch the mode: ON-OFF-Wi-Fl):
   a. Manual mode: ‘ON* switch, control the functions switch through the host button or remote control. The product will default automatically switch off in 4 hours In manual mode.
   b. Wi-Fi mode: “Ni-Fis switch, control the light colors and functions switch via smart phone APP or smart speaker.

2. APP Functions
   a. Color Interface: Change the ocean wave color, brightness and color saturation;
   b. Scenario Interface You can customize multiple scenarios, select your favorite ocean wave effect. adjust brightness, color saturation, keep the lights static, mix-colored lights flashing or breathing mode switch.
   c. Timer & Schedule interface: Customize the auto shutdown time.

3. Smart Speaker Control: Use smart speakers such as Amazon Echo, Google Assistant to voice control the product switch, colors changed and brightness.

4. Voice Control Model In manual mode, press the remote ‘Micro’ button to activate the voice control, and lights will flash according to the external sound or the change of music rhythm.

5. Manual Mode
   Host button function descriptions 1. Automatic recognition USB data. Note that this projector can auto recognize and play music while inserting USB memory. USB should contain some songs
   2. Ocean wave brightness adjustment
   3. Short press play previous song; Long press reduce volume
   4. Short press play next song; Long press increase volume
   5. Short press control the music play/pause
   6. Short press achieve Bluetooth/USB mode switch when connect Bluetooth and USB at same time
   7. DC Input SV/2A
   8. Power ON/OFF/Wi-Fi mode switching
   Remote control function description
   Instruction: When music starry projector connects power; LEO blue light keeps on and in moving status; laser light In breathing mode, ft can default automatically switch off In 4 hours (Taring without daily circle).1.Control LED ocean wave light ON/OFF
   2.Control Laser light ON/OFF
   3.Press “R” , red light ON; Press again, red light OFF (at basic of light on at first time)
   4.Press “G” , green light ON; Press again, green light OFF (at basic of light on at first time)
   5.Press “Be , blue light ON; Press again, blue light OFF (at basic of light on at first time)
   6.Press l’W” , white light ON; Press again, white light OFF (at basic of light on at first time)
   (Note: Four color RGBW buttons can be combined by two to form a double- color projection)
   7.Control device volume up
   8.Control device volume down
   9.Select playing previous song
   10.Select playing next song
   11.Voice control: Lights will fast flash following the external sound or music rhythm (LED ocean wave and laser lights default keep on in voice-activated mode;
   Note: Press any other remote buttons except the music control buttons to auto exit the voice control mode)
   12.Control ocean wave moving speed up (Pause–Slow–Medium–Fast)
   13.Control ocean wave moving speed down (Fast–Medium–Slow–Pause)
   14.Timer Off: LED light and laser light flash 3 times as prompting for set timer off successfully.
   15.Press ‘FADE alp , ocean wave move circularly in R-G-B-W single color mode and laser light changed to gradation mode
   16.Press ‘FADE 2′ , ocean wave move circularly in RB-RG-RW-BG-BW-GW double- color mode and laser light changed to gradation mode
   17.1H Timer: Shut off automatically after device work for 1 hour. LED light and laser light flash once time as prompting for set 1H timer successfully.
   18.Control LED ocean wave light brightness (In order of 100%–70%–40%–10%–40%–70%–100%)
   19.Press “LASER light’ achieve either Laser light stay on or enter into gradation mode
   20.2H Timer: Shut off automatically after device work for 2 hours. LED light and laser light flash 2 times as prompting for set 2H timer successfully
   21.Control Music Switch On/Off
   Notice: This product comes with 4 hours automatic shutdown function that is work for 4 hours and shut down automatically.

6. Wi-Fi ModeW
   i-Fi Setting: (1) Check your phone Wi-Fi “On’ , or the product won’ t be connected; (2) Enable the location information on your phone, or it cannot show the connected Wi-Fi name; (3) Conned your phone to a 2.4GHz network and other frequencies is not supported; (4) In Wi-Fi mode, you can only adjust the light effects (except the Bluetooth mode) through phone APP or smart speaker, not by host button and remote controller.

7. Download the APP by scanning the following OR Codas (Notes: The same operations on the following two APPS. Let us take ‘Smart Life’ APP for an example):

   https://smartapp.tuya.com/smartlife

   https://smartapp.tuya.com/tuyasmart

8. Search ‘Smart Life’ APP through Google Play(For Android) or APP Store (For Apple-iOS) and Download it

9. Register and log in to the APP
   1). Open the ‘Smart Life’ APP
   2). Log in your account and password. Please register a new account on first use

10. Configuration
    1). Connect the power supply of this star projector and the host status Is OFF switch
    2). Connect to the WI-Fl: Slides repeatedly for 3 limes with the following steps: OFF WI-Fl OFF-WI FI-0FF-WI FI, Iceep the host switch In ‘WI-F1 till the Indicator light shows white and fast-flashing. Note: the Interval of the power switch sliding should not exceed 10 seconds
    B. Turn On “Smart Life” APP, didr Add Device select “Lig Irking— ht-ing(Wi- Fir choose your home Wt-Fi end enter password Of applicable), end dick ‘Next’ (Nuts Connect yaw phone to a 2.46Hz network router. end 5Giatc network not supported).

C. Then entering the =nil ‘Device, eddied succesfu connected successfully.
Once connected, show r Lerdusk Sttir Light has been
APP Functions

1. Click on the ‘Music Star Light’ icon to enter the main interface, touch the Power Switch to turn on/off the music star projector. You can customize the product name through clicking the icon at the top right-hand corner.

2. Color Interface: Adjust the colors, brightness, color saturation, and customize the colors in static, jumping or breathing mode.

3. Scenario Interface
   (1) Customize 8 Rename: You can customize end rename the scenario, choose your favorite color effects (2) Modulo Optianok Cid( the soon you wont, select yew with ocean wive Won, brightens, color saturation. Freely choose 3 kinds of color modes a. Static mode; b_ Jumping mode; Breathing mod!. Curb:trite the coke- chingoci speed in jumping and broithing mocies(lf in wrong setting, please clkk ‘Reset’ at the right-hand corner to restore default setting) Click`React’ at the righi-bird comer to rotors cleat setting White Light Must brightness, dthult In static mode. If you chooes Jumping and bnurthIng moss, white light itunlid be default combined together with cobs 1013 to achieve the Jumping and bnithIng mat SetttdColour Light interface: Adjust color, brightness, color saturation, 3 kirais of color modes: 4, Sutic b. Jumping: « Breathing
   Custorniza the Eight color changed speed In  Jumping and breathing mocies

4. Auto-Off Timer: Customize the time you want, once set successfully, the systarmn will default enter the countdown status

5. Schedule: Customize the power On/Off

How to Connect with Amazon Alexa:

1. Search “Smart Life” APP through Google Play (For Android) or APP Store (Far Apple-lOS) and download It
2. Open the APP and register a new account or log in (f you have registered)
3. Turn ‘Smart Life? APP and connect to the network:
4. Necessary Note: You can use the “Smart Life’ APP to rename the product For example, if you want to rename the Music Star Light to “Livingroom Light” , please find this device In step 9 so that Echo will receive the updated name;
5. Download “Amazon Alexa” APP through Amazon Market, Google Play or iOS APP Store, and connect the Echo with “Amazon Alexa‘
6. Search “Smart Life” in the Amazon Alexa Skills;
7. Click to start the Smart Life in the Alexa Skills, enter your account name, password on this web page;
8. Authorize and allow Amazon Alexa to log in your Smart Life registered account, talk to Echo: “Alexa, search the device, please” , once completion, Echo say: “Search completed” ;
9. All settings are finished and now you can talk to Amazon Alexa to contra! this device.

Here are the Voice Commands on the Smart Life:
Alexa, turn on Music Star Light
Alexa, turn off Music Star Light
Alexa, set Music Star Light to 20 percent
Alexa, brighten/increase Music Star Light
Alexa, dim/decrease Music Star Light
Alexa, set Music Star Light to green
Troubleshootings for Network Configuration

1. Verify the Wi-Fi password in the following ways
   Open the Wi-Fi list on your phone, click the Wi-Fi name and ignore it, then reconnect and enter the password again to ensure connecting successfully. If not, please use the right Wi-Fi password.

2. If your phone cannot show your home Wi-Fi, please check if the location information on your phone is enabled.

3. Please check if your phone is connected with 2.4GHz network (other frequencies is not supported).

4. Please check the Wi-Fi name cannot contain Chinese, blank and special characters.

5. Please check the Wi-Fi password cannot be empty, it can up to a maximum of 58 characters and try to avoid using special characters.

6. When in connection, Please keep the product close to the network router at a distance of 5 meters.

Specifications:

beads (520-525nm), blue light beads (460-465nm), white light beads (color temperature 1500-15000k), green light wavelength (532nm)
Projection Distance| 2-10W6.56-32.80ft
Projector Area| The projection area is 120m’ at a distance of 3M, and 200nf at a distance of 5M
Motor| Starting Voltage: 3V, with 2-3 r/min
Input Power| 100-240V AC 50/60Hz 2.0A (Work together with power adapter)
Operating Temperature| -20-50°7Q-4-122F
Storage Temperature| -20-60T/-4140°F
Product Model| BL-XKO1
Laser Level| Class 2 (Class II)
Laser Power| < 1mV
Use and Maintenance| Indoor use, maintenance-free
Product Dimension| Cl 64 125mm/6.45 * 4.92inch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>