Calrad 40-841M Composite AV Matrix Switcher Specification & DataSheet

Calrad 40-841M Composite AV Matrix Switcher

40-841M 4 X 2 COMPOSITE/S-VIDEO MATRIX SWITCHER

Remote/Manual controlled 4 inputs to 2 outputs composite/S-Video Matrix switchers with audio combined. Comes with IR remote control (batteries included) AN input cable and DC power supply. Composite/S-Video bandwidth up to 100 Mhz. Switching Control: Via Infra Red Remote Control or front panel manual push buttons. Individual L.E.D. indicators display Output-A, Output-B input selections. 40-841 M-RS232 interface adapter sold seperately.

specifications

INpUt:

• Video Terminals..Composite & SVHS Jacks x 4
• Video Input………………………+1Vpp, 75W
• Audio Terminals ……….. RCA Jacks x 12
• Audio Input …………….Stereo (R+L), 40W

OUtpUt:

• Video Terminals..Composite & SVHS Jacks x 2
• Video Output……………………+1Vpp, 75W
• Audio Output ………..Stereo (R+L), 40KW
• Video Bandwidth………………….>250MHz
• Video Distortion …………<1.2dB (+/- 3dB)
• Audio Distortion …………<0.6dB (+/- 3dB)
• Channel Isolation……………………..>50dB
• Signal to Noise Ratio ………………..<50dB
• Dimensions ….9”(W) x 5.2”(D) x 1.70”(H)
• Weight (unit only) ……………………580 gm
• Power Consumed…@350mA Maximum
• Power Source …………………. 5Vdc, @2A
• AC Adapter Included

40-948m 8 X 8 AUDio\ViDeo Composite mAtRiX sWitCheR

IR Remote or Manual controlled 8 input to 8 output RCA composite video and L+R audio Matrix switcher. Comes with IR remote control (batteries included) A/V input cable and DC power supply. Composite Video bandwidth up to 250 Mhz.

specifications

iNpUt:

• Video Input………….Composite Video x 8
• +1Vpp, 75W
• Audio Input …………..Stereo (R+L), 40KW
• Terminal Input ……………RCA Jacks x 24

oUtpUt:

• Video Output……….Composite Video x 8
• +1Vpp, 75W
• Audio R+L Output……… RCA Jacks x 16
• Video Bandwidth………………….>250MHz
• Video Distortion …………<1.2dB (+/- 3dB)
• Audio Distortion …………<0.6dB (+/- 3dB)
• Channel Isolation……………………..>50dB
• Signal to NoiseRatio …………………<50dB
• Video Crosstalk ……………………….<60dB
• Dimensions17.3(W)x 5.90”(D) x 2.60”(H)
• Weight (unit only) ………………….1560 gm
• Power Consumed….@500mA Maximum
• Power Source ……………..12Vdc @1Amp
• Power Adapter Included

40-841m-Rs232

40-940m 8 X 4 Composite Video/s-Video matrix switcher

The 40-940M has eight S-Video, composite video and stereo audio inputs to four S-Video, composite video and stereo audio outputs. A maximum bandwidth of 250MHz will support 480P and 720P resolutions. IR remote control or manual push button programming allows you to assign any input to any output. RS232 interface allows you to control and program the switcher with PC controlled software. 12Vdc power supply included.

specifications

iNpUt:

• Video Terminals..Composite & SVHS Jacks x 8
• Video Input………………………+1Vpp, 75W
• Audio Terminals ……….. RCA Jacks x 16
• Audio Input …………….Stereo (R+L), 40W

oUtpUt:

• Video Terminals..Composite & SVHS Jacks x 4
• Video Output……………………+1Vpp, 75W
• Audio Output ………..Stereo (R+L), 40KW
• Video Distortion …………<1.2dB (+/- 3dB)
• Audio Distortion …………<0.6dB (+/- 3dB)
• Channel Isolation……………………..>50dB
• Signal to NoiseRatio …………………<50dB
• Video Crosstalk ……………………….<60dB
• Dimensions17.3(W)x 5.90”(D) x 2.60”(H)
• Weight (unit only) ………………….1560 gm
• Power Consumed….@500mA Maximum
• Power Source ……………..12Vdc @1Amp
• Power Adapter Included

FEATURES

The following is a list of functions that are typically included in composite audio-video matrix switchers:

• Switching in a Matrix:
  You are able to route numerous composite audio and video streams to a number of different displays or destinations using the switcher. This indicates that you have the ability to pick independently which source goes to which display.

• Connectors for Input and Output:
  The switcher comes equipped with a predetermined number of input and output ports that can be used to link composite AV sources (like DVD players, gaming consoles, and cameras) to displays (like TVs, projectors, and monitors).

• The following are the input and output numbers:
  The Calrad 40-841M will have a predetermined quantity of input and output ports, which is typically indicated as “x In / y Out,” in which x represents the quantity of inputs and y represents the quantity of outputs.

• Controls on the Front Panel:
  On the front panel of certain switchers is a set of buttons that, when pressed, allow the user to manually pick the source that is to be presented on a particular output. This makes the use of a remote control unnecessary for immediate switching, as it is beneficial for that purpose.

• Controlled with a Remote:
  Many switchers come packaged with a remote control that enables the user to make routing adjustments from a greater distance.

• Remote Control Extender for IR (Infrared) Devices:
  Some variants come equipped with an infrared (IR) extender, which enables you to exercise remote control over the connected source devices even if they are housed in a cabinet or other out-of-sight location.

• Control through RS-232:
  There is a possibility that more advanced switchers will enable RS-232 control in order to facilitate interaction with more extensive AV systems and automation.

• To be compatible with:
  The switcher is compatible with the composite video and stereo audio streams that are typically utilized by older devices.

• Help With the Resolution:
  The quality of composite video is normally that of standard definition (SD), and as a result, the switcher needs to be able to accommodate the typical resolution of composite video (for example, 480i).

• The Quality of the Signal:
  In order to keep the audio and video quality consistent, the switcher should degrade the signals as little as possible while they are being routed.

• Various Modes of Signal Routing:
  A single input can lead to a number of different outputs, multiple inputs can lead to a single output, and other routing options are also available on some switchers.

• Mounting Alternatives:
  Some models have the ability to be rack-mounted so that they can be integrated into professional audiovisual sets.

• Audio Follows Video is abbreviated as “AFV.”
  This function guarantees that the corresponding audio is transmitted along with the visual source that was chosen.

• Management of the EDID:
  In more advanced switchers, the EDID management function might be included to verify that the signals from the various sources are compatible with the displays.

• Indicators of the Status:
  It’s possible that LED indicators on the front panel will show which input is active at the moment for each output.

FREQUENTLY ASKED QUESTIONS

What is the Calrad 40-841M Composite AV Matrix Switcher?

The Calrad 40-841M is a device that allows you to switch and distribute composite audio and video signals between multiple sources and displays.

What is the purpose of this matrix switcher?

This switcher is designed to manage and route composite audio and video signals from various sources to different displays.

How many input and output ports does this matrix switcher have?

The specific model might vary, but the Calrad 40-841M typically has 4 input ports and 1 output port.

What types of devices can I connect to this matrix switcher?

You can connect various devices with composite AV outputs, such as DVD players, VCRs, gaming consoles, and cameras.

Can I use this switcher for both audio and video signals?

Yes, this switcher supports both composite audio and video signals.

How do I control the switcher to change sources and displays?

The switcher often includes a remote control or front panel buttons for manual source selection.

What is the maximum resolution supported by this switcher?

The maximum resolution might be standard definition (SD) resolution, which is typical for composite video.

Does the switcher require external power?

Yes, the switcher usually requires an external power source to function.

Can I connect modern HDMI devices to this switcher using adapters?

It might be possible to use adapters to connect HDMI devices to the composite inputs, but compatibility and quality can vary.

Is there any delay or signal degradation when switching sources?

Some models might introduce a slight delay when switching, but signal degradation should be minimal for composite signals.

Can I use this switcher for real-time applications like gaming?

Due to potential delays in signal switching, real-time applications like gaming might not be ideal for this switcher.

Is the switcher compatible with PAL and NTSC systems?

Many composite devices support both PAL and NTSC signals, but you should check the specifications of your specific devices.

Can I daisy-chain multiple switchers for more inputs and outputs?

Some setups might allow for daisy-chaining, but the switcher's capabilities and specifications will determine if this is possible.

Is this switcher suitable for home theater setups?

The switcher can be used in home theater setups, particularly if you have multiple composite sources and displays.

Does the switcher support remote control over an IR extender?

Some models might have IR extender support, which allows you to control the switcher from a distance.

Download the PDF Link:Calrad 40-841M Composite AV Matrix Switcher Specification & DataSheet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>