CORSAIR AF120 RGB Slim PWM Case Fan User Manual

June 12, 2024
Corsair

AF120 RGB SLIM
THIN 15mm PROFILE
HIGH-AIRFLOW PERFORMANCE
BRILLIANT RGB LED LIGHTING
User ManualCORSAIR AF120 RGB Slim PWM Case Fan

AF120 RGB Slim PWM Case Fan

CORSAIR AF120 RGB Slim PWM Case Fan - Figure

REQUIRED HARDWARE

CORSAIR AF120 RGB Slim PWM Case Fan - REQUIRED
HARDWARE A PHILLIPS-HEAD SCREWDRIVER (not included)
B SHORT FAN MOUNTING SCREWS
C LONG FAN MOUNTING SCREWS (used when installing fans on a radiator)

FAN INSTALLATION

  1. TURN OFF COMPUTER
    Turn your system off prior to installing your AF120 RGB SLIM fan.

  2. MOUNT LIGHTING NODE CORE Find a location for the Lighting Node CORE that allows the fan RGB LED cables to reach the Lighting Node CORE, then mount it with the provided mounting strips.

  3. MOUNT AF120 RGB SLIM Mount the AF120 RGB SLIM inside your case with the provided short mounting screws [B].
    Fan mount locations will vary depending on the case manufacturer.
    Please use the long screws [C] if you’re mounting the AF120 RGB SLIM on an water cooling radiator.

  4. CONNECT FAN TO RGB CONTROLLER Connect the 4-pin RGB connectors from your AF120 RGB SLIM fans into the Lighting Node CORE controller in sequential order from port #1 to #6.

  5. CONNECT LIGHTING NODE CORE TO PCCORSAIR AF120 RGB Slim PWM Case Fan - NODE CORE TO PC Plug the 9-pin USB cable from the Lighting Node CORE into an available internal USB 2.0 header on your motherboard or USB hub.
    Connect the SATA power connector to an available SATA connector from your power supply.

  6. CONNECT TO POWERCORSAIR AF120 RGB Slim PWM Case Fan - CONNECT TO POWER Connect the 4-pin PWM connector into an available 3-pin or 4-pin (recommended, if available) fan header on your motherboard or fan controller.
    You can use fan splitter cables (sold separately) if your motherboard or fan controller does not have enough fan headers.
    Connecting the 4-pin PWM connector into a 3-pin fan header will cause your AF120 RGB SLIM to spin at full speed.

iCUE SETUP

  1. INSTALL iCUE
    Click the image to download CORSAIR’s latest iCUE software.

  2. CONFIGURE iCUE
    Once iCUE is installed, select the “8-LED fan Series” in the Lighting Setup page under Lighting Node CORE.CORSAIR AF120 RGB Slim PWM Case Fan -
CONFIGURE iCUE

  3. ADDITIONAL RESOURCES
    Please visit our CORSAIR LAB YouTube channel for more tips and instructions on how to get the most out of your new CORSAIR fans.

Web: corsair.com
Phone: 888-222-4346
Warranty:

corsair.com/support/warranty
Support:| support.corsair.com
Blog:| corsair.com/blog
Forum:| forum.corsair.com
YouTube:| youtube.com/corsairhowto

© 2023 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.
49-002679 AA

CORSAIR AF120 RGB Slim PWM Case Fan - Symbol 2

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals