CORSAIR iCUE LC100 Case Accent Lighting Panels User Manual

CORSAIR iCUE LC100 Case Accent Lighting Panels

Product Information

The iCUE LC100 is a case accent lighting panel kit that includes mini triangle panels. It consists of a master triangle, companion triangles, connection rods, a lighting node pro, and cables. The LC100 panels are designed to provide customizable accent lightinginside your computer case.

Product Usage Instructions

LC100 Installation:

1. Turn off your computer.

2. Mount the master LC100 triangle on a steel surface inside the case.

3. Attach companion LC100 triangles to the left or right connection sides of the master triangle using the provided connection rods.

4. If placing two triangles on a corner, use a 5.5mm connection rod.

5. Up to eighteen (18) total LC100 triangles can be connected simultaneously. An additional master triangle is required as a power input, which is available through the LC100 Expansion Kit.
   Mounting Lighting Node PRO (Starter Kit only):

6. Find a location for the Lighting Node PRO that allows the 3-pin RGB cable from the master triangle to reach it. Mount it using the provided mounting strips.
   Connecting LC100:

7. Connect the 3-pin RGB connector from the main master triangle into the Lighting Node PRO.
   Connecting Lighting Node PRO:

8. Plug the 9-pin USB cable from the Lighting Node PRO into an available internal USB 2.0 header on your motherboard or USB hub.

9. Connect the SATA power connector to an available SATA connector from your power supply unit.
   iCUE Setup:

10. Install the latest iCUE software from CORSAIR’s website.
    Configuring iCUE:

11. Once iCUE is installed, select the LC100 in the Lighting Setup page under Lighting Node PRO and define the number of triangles you have in your system.

12. Alternatively, use the Setup Wizard in iCUE to guide you with configuring your LC100 Case Accent Lighting Triangles.

For additional setup, configuration, and tips, please visit our CORSAIR LAB.

Compatibility:
The LC100 is compatible with the Lighting Node PRO, Commander PRO, and Commander CORE XT. Each controller can support a maximum of 18 LC100 triangles.

GETTING TO KNOW YOUR LC100

• 1x MASTER LC100 TRIANGLE
• 8x COMPANION LC100 TRIANGLES
• 8x 4mm CONNECTION RODS
• 2x 5.5mm CONNECTION RODS
• LIGHTING NODE PRO (INCLUDED WITH LC100 STARTER KIT)
• CABLES (INCLUDED WITH LC100 STARTER KIT)

LC100 INSTALLATION

• To ensure proper operation, keep the contact pins and connection rods free of any foreign objects/materials.
• Please use the LC100 panels and connection rods as defined in this document. Only LC100 panels should be connected to the connection rods.
• Ensure that the PC is turned off when adding, removing, or re-arranging LC100 panels to avoid premature failure

Turn off computer

Turn your system off prior to installing your LC100 Case Accent Lighting Triangles and Lighting Node PRO.

Mount LC100

• Mount the [A] LC100 master triangle on a steel surface inside the case.
• Attach [B] companion LC100 triangles to the left or right connection sides of the [A] master triangle by inserting a [C] 4mm connection rod between the triangles
• Use a [D] 5.5mm connection rod if placing two triangles on a corner.
• Up to eighteen (18) total LC100 triangles can be connected simultaneously. An additional [A] LC100 master triangle is required as a power input which is available through the LC100 Expansion Kit.
• The 3-pin RGB connector from the secondary master tile is not required to be connected to the Lighting Node PRO

Mount Lighting Node PRO (Starter Kit only)
Find a location for the [E] Lighting Node PRO that allows the 3-pin RGB cable from the [A] master triangle to reach the [E] Lighting Node PRO, then mount it with the provided mounting strips.

Connect LC100
Connect the 3-pin RGB connector from the main [A] master triangle into the [E] Lighting Node PRO

Connect Lighting Node PRO

• Plug the 9-pin USB cable [F] from the [E] Lighting Node PRO into an available internal USB 2.0 header on your motherboard or USB hub.
• Connect the SATA power connector to an available SATA connector from your power supply unit.

iCUE SETUP

Install iCUE

Click the image to download CORSAIR’s latest iCUE software

Configure iCUE

• Once iCUE is installed, select the “LC100” in the Lighting Setup page under Lighting Node PRO and define the number of triangles you have in your system.
• Alternatively, use the Setup Wizard in iCUE to guide you with configuring your LC100 Case Accent Lighting Triangles.

ADDITIONAL SETUP

Please visit our CORSAIR LAB for additional iCUE setup, configuration, and tips

CORSAIR MEMORY, Inc. declares that this equipment is in compliance with Directive 2014/30/EU and Directive 2011/65/EU. A copy of the original declaration of conformity can be obtained at corsair.com/documentation. Operating temperature: 0°C ~ + 40°C The Authorized Representative In Europe CORSAIR MEMORY, BV | Wormerweg 8, 1311 XB, Almere, Netherlands

NOTE ON ENVIRONMENTAL PROTECTION

• After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies:
• Electrical and electronic devices may not be disposed of with domestic waste.
• Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices, you are making an important contribution to protecting our environment

FCC

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

IC Statement:
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CAN ICES-003(B)/NMB-003(B)

R-R-CSI-RWF0072
MSIP-REM-RWF0019
Applicant Name: CORSAIR MEMORY, Inc.
Product Name: RGB LED Strip / Lighting Node PRO controller
Model No: RWF0072/ RWF0019
Manufactured Year & Month: Please refer to S/N
Manufacturer & Origin:
CORSAIR MEMORY, Inc. / Please refer to retail packages
© 2022-2023 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002554 AC

References

• Documentation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>