Villeroy Boch A4551000 MyView Now Surface-Mounted Mirror Cabinet Rectangle Instruction Manual

: June 12, 2024
: Villeroy Boch

Table of Contents

References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Villeroy Boch A4551000 MyView Now Surface-Mounted Mirror Cabinet Rectangle Instruction Manual

<http://m.villeroy-boch.com>

Two people are required for assembly.

No liability whatsoever can be accepted for incorrect assembly!

Please note:

Leave electrical connections to an expert. Observe the protection regulations of country in question

For indoor use only!

Turn off electricity at mains before commencing work!

To avoid hazards, only the manufacturer, their service representative or similar qualified person may replace the external flexible cable on this lamp in the case of damage. The light source of this lamp is not replaceable. If the light source has to be replaced (e.g. at the end if its service life), the entire lamp must be replaced. Do not allow young children (aged 0 to 8 inclusive) to use furniture with clectron parts. This furniture may be used by people (including children) with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge, prisided they are supervised or instructed on safe use, and have understood the posible dangers.

Warning!

Touching live parts can lead to severe injury and even death.

Taking out of service

Recycle electronic equipment, or dispose of in the proper manner
Do not dispose of electronic equipment in household waste.
Observe local regulations

Electronic equipment may only be repaired and taken out of service by an electrician.

Procedure for taking out of service

Switch off mains power to the cable and secure so that it cannot be switched hack on
Unplug the cable connections
Disconnect and remove electronic components

This product contains a light source of energy efficiency class .

The following steps describe how to connect to a Zigbee Gateway.
For first-use, the lighting is delivered already in the factory default state, so you can directly start with the pairing process.
If there is a problem, please reset the lighting to the factory default and start the process again.

Pairing to a Gateway:

Start by putting the App for your Zigbee Gateway into lighting search mode. You can search for the lighting type „other“.
Turn the lighting on. It should pulse 2 times and then remain steadily on.
The Zigbee-Gateway has successfully connected when light blinks 2 times. Depending on the features in the Gateways App, you can now eg, rename the light and allocate it to a room or group etc.
If no connection is successful within ~ 15 seconds, reset the furniture to the factory default and start the process again..

Resetting to the Factory Default

Start with the lighting turned on.
Turn the lights quickly off and on again, within 2 seconds.
Repeat four more times
The lighting is reset after the 5th time, and gives confirmation by pulsing 2 times.

VILLEROY & BOCH

GERMANY
Villeroy & Boch AG
Bathroom and Wellness Division
Headquarters
66693 Mettlach
Germany

Tel: +49 (0) 68 64 / 81 0
Fax: +49 (0) 68 64 / 81 1484