Magnat Symbol X 130 Indoor/Outdoor Speaker OWNER’S MANUAL
- June 12, 2024
- Magnat
Table of Contents
Magnat Symbol X 130 Indoor/Outdoor Speaker
At the end of the product’s useful life, please dispose of it at the appropriate collection points provided in your country.
Dear MAGNAT Customer,
Congratulations on your fine new loudspeakers and thank you very much for
choosing MAGNAT! You have made an excellent choice. The high-quality speakers
produced by MAGNAT are renowned all over the world.
Please study the instructions and information below carefully before using
your new loudspeakers.
Included Parts
THE FOLLOWING PARTS ARE INCLUDED IN THE SCOPE OF DELIVERY:
- Symbol X loudspeakers (2 pcs.)
- Wall bracket part 1 (2 pcs.)
- Wall bracket part 2 (2 pcs.)
- Wall bracket base plate (2 pcs.)
- Hexagon socket screw M5 x 45 mm (4 pcs.)
- Washer (4 pcs.)
- Fastening screw 4 x 53 mm (6 pcs.)
- Plug 8 x 40 mm (6 pcs.)
- Hexagon socket screw M5 x 21 mm (4 pcs.)
- Washer (4 pcs.)
- Hex Key 4 mm
- Rubber feet (8 pcs.)
POSITION
POSITIONING YOUR MAGNAT SYMBOL X SPEAKERS FOR OPTIMUM PERFORMANCE
Stereo reproduction
Reproduction of stereo sound requires two loudspeakers, which are sometimes supported with an additional subwoofer. The speakers are generally referred to as the left and right speakers or the left and right channels. They should be located in front of and to the left and right of your listening position. In the ideal configuration, the speakers and the listening position should form an equilateral triangle, which is known as the “stereo triangle” (Fig. 1). When the left and right speakers are the same distance from the listening position their sound arrives at the same time, resulting in a harmonious, natural music reproduction. It is also best to position the loudspeakers in the part of the room containing the most “hard”, acoustically reflective surfaces – for example in front of a wall or windows. The sound from the speakers should be directed from the “hard part” of the room into the “soft part” – i.e. the area containing the most carpets, couches, and other sound- absorbing furniture and materials. There should be a clear line of sight between the loudspeakers and the listening position. Any sound-absorbing or reflecting obstacles in the path will distort the music.
Fig. 2 shows the function of the wall bracket and how to mount it. Please note that the speakers can also be mounted horizontally. In this case, the Magnat logo on the grille can be rotated by 90°. Pull the logo forwards slightly and rotate it in the desired direction.
Mounting
- A) Secure the wall bracket/base plate (3) to the wall by using the wall plugs (8) and screws (7) supplied. Use the wall bracket as a template to mark out the drill holes. When doing this, make sure everything is horizontal.
- B) Secure the wall bracket (part 1) (2) together with the wall bracket (part 2) (4) to the rear of the speaker; do not tighten the screws (9) yet. Align the speaker as desired and tighten the screws (9).
- C) Secure the speaker together with the already mounted wall bracket (part 1) (2) to the wall bracket/base plate (3) by using the screws (5). Do not tighten the screws initially here either. Align the speaker as desired and tighten the screws (5).
To ensure stability, the supplied rubber feet should be attached to the bottom
of the box (four per box) if the loudspeakers are used without wall brackets.
The Symbol X loudspeakers are IPX5 proven and widely resistant to moisture so
they may also be used outdoors and in damp rooms. Observe the following points
in order to ensure perfect functioning over the long term:
- Do not expose to direct sunlight and permanent humidity (e.g. rain) for extended periods of time.
- Only use at temperatures ranging between 0 °C and +40 °C.
GENERAL INFORMATION
GENERAL INFORMATION ABOUT CONNECTING YOUR MAGNAT SYMBOL X LOUDSPEAKERS
Please always use good quality loudspeaker connection cable from an audio dealer. To prevent impairment of sound quality we recommend cables with cross- sections of at least 1.5 mm², better 2.5 mm² for lengths up to 3 m, and at least 2.5 mm² or 4 mm² for longer lengths.
Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place the loudspeakers in their planned positions and cut the cables to the right length (see Positioning Your Magnat Symbol X loudspeakers above). The cables for both channels should always be exactly the same length.
Strip 10 – 15 mm of insulation from the ends of the cables. Twist the ends – this is much better than tinning them with solder – insert them in the terminals and tighten the terminal screws firmly.
IMPORTANT: For good sound the cables must be connected so that the speakers are “in phase”. This means that the black negative terminals on the speakers (-) must be connected to the negative (-) terminals on the amplifier, the positive (+) speaker terminals to the positive (+) amplifier terminals. To make this easier one wire of most speaker cables is marked with a colored strip or a ridge in the insulation.
Before switching on the system double-check all your connections and make sure that the terminal screws are tight and that there are no short circuits caused by stray wire filaments – this could cause serious damage to your amplifier!
HOW TO AVOID DAMAGE TO YOUR VALUABLE SPEAKERS
All MAGNAT loudspeakers are designed and built for optimum sound reproduction
with the tone controls in the central position – i.e. with “linear” amplifier
output. Turning up the bass and treble controls too far delivers more power to
the woofers and/or tweeters, and at high volumes this can actually destroy the
speaker units!
If the output of your amplifier is significantly higher than the rated power
handling capacity of your speakers extremely high volumes can physically
destroy your speakers. This doesn’t actually happen often but you should be
aware that it is possible.
Weak amplifiers with low output ratings can actually be more dangerous for
your speakers at medium volumes because weak amplifiers may overload much
faster than powerful ones and this causes measurable and audible distortion,
which is extremely dangerous to your loudspeakers.
Always turn the volume down immediately as soon as you hear distortion! If you
like listening to loud music make sure that your amplifier can deliver at
least as much power as the speakers’ power-handling rating.
THE SOUND YOU CAN’T HEAR…
Amplifiers, tuners and CD/DVD players can all produce inaudible high-frequency signals – and this doesn’t only apply to cheap products. If your tweeters fail at low or medium volumes you should have a qualified technician check your system components for dangerous inaudible signals.
MAINTENANCE
The surface is best cleaned with a mild household cleaner. On no account use furniture polish or similar products.
SPECIFICATIONS
Subject to technical change.
Accessories
Wall bracket, fastening material
Features
Dynamic overload protection, IPX 5 certified (suitable for damp rooms and
outdoors)
FAQ’S
1. Can I use the Magnat Symbol X 130 speakers both indoors and outdoors?
Yes, these speakers are designed for both indoor and outdoor use, thanks to their weather-resistant construction.
2. What's the power handling capability of these speakers?
The power handling capability typically varies, but it's often mentioned in the product specifications. Please check the official product documentation for specific details.
3. Can I mount these speakers on walls or ceilings?
Yes, many indoor/outdoor speakers are designed with mounting options, making it easy to install them in various locations.
4. Are these speakers wireless or wired?
This depends on the specific model. Some indoor/outdoor speakers offer both wired and wireless connectivity options.
5. What's the frequency response range of these speakers?
The frequency response range is typically mentioned in the product specifications and can vary between different models.
6. Do these speakers require an external amplifier?
This depends on the speaker's power handling and efficiency. Some models might require an amplifier for optimal performance.
7. Can I connect these speakers to my smartphone or tablet?
Many indoor/outdoor speakers are equipped with Bluetooth or Wi-Fi connectivity, allowing you to connect your devices wirelessly.
8. Are these speakers resistant to weather conditions like rain and sunlight?
Yes, most indoor/outdoor speakers are designed to be weather-resistant, so they can withstand exposure to various elements.
9. How do I clean and maintain these speakers?
Cleaning instructions can vary, but generally, you can use a soft cloth to wipe off any dirt or dust. Avoid using harsh chemicals.
10. Can I use these speakers for home theater setups?
Yes, if the speakers are designed for general audio purposes, they can be used as part of a home theater system.
11. Are these speakers compatible with voice assistants like Alexa or Google Assistant?
Some modern indoor/outdoor speakers come with built-in voice assistant compatibility, but you'll need to check the product features to be sure.
12. What's the warranty period for these speakers?
Warranty periods can vary, but this information is usually provided in the product documentation or on the manufacturer's website
13. Can I connect these speakers to other audio devices like a TV or a turntable?
Depending on the available inputs and connectivity options, you might be able to connect these speakers to various audio sources.
Download this PDF Link: Magnat, Symbol X 130, Indoor/Outdoor Speaker, OWNER’S MANUAL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>