DEKOLIGHT 343034 Floor Lamp Instruction Manual
- June 12, 2024
- DEKOLIGHT
Table of Contents
DEKOLIGHT 343034 Floor Lamp
Product Information
- Product Name: Office One-Floor Lamp
- Article Number: 343034
- Power Supply: 220-240V AC/50-60Hz
- Power Consumption: 40W
Product Usage Instructions
Proper Use
This product is designed for lighting purposes only. It should be used on
normal or non-flammable surfaces in protected and dry interior rooms. Ensure
that the surface can support the weight of the lamp.
Faulty Function
If the light does not turn on, check if the switch is turned on. Ensure
that the transformer is properly mounted and connected. If applicable, check
the remote control and replace the batteries if necessary. Also, check the
connected lines. If the lamp still does not function properly, it may be
defective.
Changing Lamps
The light source of this lamp is not replaceable. When the light source
reaches the end of its life, the entire luminaire needs to be replaced.
Storage and Disposal
Used electronic devices should be returned to public collection points and
should not be disposed of as household waste. Store the lamp in a dry and
clean environment. Avoid subjecting the product to mechanical strain during
storage.
Dear customer,
thank you for deciding to purchase our product. The product fulfills the
requirements of effective European and national guidelines. To maintain the
condition of the product and to ensure safe operation, you – as the user –
must observe the product notes and the operation manual! They contain
important information for the start-up and handling. It is important,
therefore, that these documents are archived carefully for referring to
information at a later stage.
Safety Instructions
We are not responsible for any property damage or personal injury caused by failure to observe these product notes and manual, improper handling, or unauthorized modifications. It can only be installed by a qualified electrician. Make sure that the item has not been damaged during transport before putting the light into operation. It may not be operated if there are any damages to electrical parts. The luminaire may only be operated completely with its protective cover. It may only be operated once removed from the packaging. The type plate must not be removed. The connection lines in the building must be disconnected before installation and secured against being switched back on. Make sure the electrical specifications for the connection lines correspond with the specifications given on the nameplate of this product. We recommend that you protect the product with a residual-current- operated protective device. Follow all installation regulations applicable at your location.
Make sure that the cables and plugs are not subject to tension or torsional forces and do not bend the cables. Protect all cables and insulation against possible damages. Output lines should be laid separately and spaced apart from other lines. The power supply cables and the lamp feeders must not cross each other. Do not allow the product to come into contact with extreme heat or naked flames. Use the supplied fastening material only when it is suited for the installation background. The product must not be covered with objects (decorations) or thermally insulating coverings /similar materials. Before disposal of the packaging material make sure that all components are removed. Keep packaging material away from the reach of children and pets. The packaging contains small parts that may be swallowed by children.
Proper Use
This product is only intended for lighting purposes and may only be operated
on normal or non-flammable surfaces. Use the product only in protected and dry
interior rooms. Make sure that the surface is suitable for permanently and
reliably taking the weight of the light.
Care
Repairs may only be carried out by a qualified electrician. If the external
flexible cable or cord of this luminaire is damaged, it shall be replaced by a
special cord or cord exclusively available from the manufacturer or his
service agent. Disconnect the entire product from the mains first and allow it
to cool down before cleaning or maintaining. Use a dry or slightly moistened
cloth for cleaning. Never use any chemicals, flammable cleaning agents, or
abrasives. These may cause damage to the surface coating and or the
insulators.
Faulty Function
Did the light switch on at the switch?
Transformer mounted and connected properly?
If available; remote control intact? Check the batteries. Check the connected
lines.
Lamp defective?
Changing Lamps
The light source of this lamp is not replaceable. When the light source has
reached its end of life, replace the entire luminaire.
Storage and Disposal
Used electronic devices must be brought back to public collection points and
must not be disposed of as household waste. Storage in a dry and clean
environment. Do not strain the product mechanically during storage.
Mounting Instruction
Deko-Light Elektronik-Vertriebs GmbH 30.11.2021 www.deko- light.com / deko@deko-light.com Technical Data can be changed without advance notice. Errors excepted.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>