SUMMIT FISHING Livescope LVS32 Transducer Mount Instructions
- June 12, 2024
- SUMMIT FISHING
Table of Contents
Livescope LVS32 Transducer Mount
Instructions
Livescope LVS32 Transducer Mount
Summit’s LVS32 mounts must be used with the hardware provided with your
Livescope system. It is critical that the shoulder bolt is fully tightened,
and the shoulder bottoms out on the transducer. The recommended torque for the
shoulder bolt is 2.5 ft-lb or 3.4
nm.
Troubleshooting
- If the mount feels loose or does not not “click” into position, either the rubber spacer is missing or the shoulder bolt is loose. Without the rubber spacer, the mount will never fully tighten.
- If the mount is initially tight and then loosens after use, the shoulder of the bolt did not bottom out on the mount and the bolt has loosened up
WWW.SUMMMITFISHINGEQUIPMENT.COM
Documents / Resources
|
SUMMIT FISHING Livescope LVS32 Transducer
Mount
[pdf] Instructions
Livescope LVS32, Transducer Mount, Livescope LVS32 Transducer Mount
---|---
Read User Manual Online (PDF format)
Loading......