LINKSWELL Ford F150 LITE T-Style Super Duty Generation 5 Radio User Manual

June 12, 2024
LINKSWELL

LINKSWELL Ford F150 LITE T-Style Super Duty Generation 5 Radio

PRECAUTIONS

IMPORTANT INFORMATION

FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide more reasonable protection against harmful interference in a residential installation and are more stringent than “outdoor” requirements. Operation is subjected to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult an experienced radio/TV technician.

WARNING
Points to Observe for Safe Usage

  • Read this manual carefully before using this disc and the system components. They contain instructions on how to use this product in a safe and effective manner. Alpine cannot be responsible for problems resulting from failure to observe the instructions in this manual.
  • This manual uses various pictorial displays to show you how to use this product safely and to alert you to potential dangers resulting from improper connections and operation. Following are the meanings of these pictorial displays. It is important to fully understand the meanings of these pictorial displays in order to use this manual and the system properly.
  • This product may be used with software applications. Please follow all usage instructions and warnings when using this product at all times. Do not use this product or any software application in a manner that will hinder the safe operation of your vehicle.

WARNING

  • The operation of the system while driving is dangerous. Users should stop vehicle before operating the software.
  • Road conditions and regulations take precedence over information contained on the map display: observe actual traffic restrictions and circumstances while driving.
  • This software is designed for use exclusively in the unit. It cannot and may not be used in conjunction with other hardware.

WARNING
This symbol means important instructions. Failure to heed them can result in serious injury or death. INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED. It is dangerous for the driver to watch TV/Video while driving a vehicle. Installing this product incorrectly enables the driver to watch TV/Video while driving. This may cause a distraction, preventing the driver from looking ahead, thus causing an accident. The driver or other people could be severely injured.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD

VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE REACH OF  CHILDREN
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire, electric shock or other injury.

MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product damage.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other safety- related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

DO NOT INSTALL IN LOCATIONS THAT MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

NOTICE

Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature
Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turning your unit on.

Maintenance
If you have problems, do not attempt to repair the unit yourself. Return it to your deer or seller.

Protecting the USB connector

  • Only an iPhone or USB flash drive can be connected to the USB connector on this unit. Correct performance using other USB products cannot be guaranteed.
  • If the USB connector is used, be sure to use only the supplied connector cable with the unit. A USB hub is not supported. Depending on the connected USB flash drive, the unit may not function or some functions may not be performed.
  • The audio file format that can be played back on the unit is MP3/WMA/AAC/FLAC.
  • Artist/song name, etc., can be displayed. Certain, special characters may not be correctly displayed.

CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc., is lost while using this product. On Handling USB Flash drive

  • This unit can control a memory storage device that supports the USB Mass Storage Class (MSC) protocol. Playable audio file formats are MP3, WMA, AAC and FLAC.
  • USB Flash drive function is not guaranteed. Use a USB flash drive according to the terms of the agreement. Read the USB flash drive Owner’s Manual thoroughly.
  • Avoid usage or storage in the following locations: Anywhere in the car exposed to direct sunlight or high temperatures. Anywhere the possibility of high humidity or corrosive substances are present.
  • Fix the USB flash drive in a location where driver operation will not be hindered.
  • USB Flash drive may not function correctly at high or low temperatures.
  • Use only certified USB flash drives. Note that even a certified USB flash drive, may not function correctly depending on its type or state.
  • Depending on the settings of the USB flash drive type, memory state or encoding software, the unit may not play back or display properly.
  • USB Flash drive may take time to start playback. If there is a particular file other than audio in the USB flash drive, it may take considerable time before the file is played back or searched.
  • The unit can play back “mp3” “wma” or “ma” file extensions.
  • Do not add the above extensions to a file other than audio data. This non-audio data will not be recognized. The resulting playback may contain noise that can damage speakers and/or amplifiers.
  • It is recommended to back up important data on a personal computer.
  • Do not remove the USB device while playback is in progress. Change SOURCE to something other than USB, then remove the USB device to prevent possible damage to its memory.

Specifications

Wire Harnesses Included List

LINKSWELL-Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-1

  1. XC01-N0332-A5 F150 Power cable
  2. XC01-N0333-A5 54P Reverse Cam Converter
  3. XC01-N0336-A1 8P USB cable
  4. XC01-N0417-A0 10P USB cable
  5. XC01-N0328-A5 RCA Audio Output
  6. XC01-N0320-A0 AUX In
  7. XC01-N0404-A0 Cam Input
  8. XC11-W0012-A0 GPS
  9. XC10-W0012-A0 Micphone
  10. &
  11. XC11-W0017-A0 4G Ant Cable
  12. XC01-N0451-A0 Spdif Output Cable
  13. XC01-N0335-A0 12P Cam cable
  14. XC01-N0323-A1 Radio Ant cable
  15. XC01-N0403-A0 DVR cable
  16. XC11-W0016-A0 Wifi cable
  17. Micro Sim card
  18. FD-SS-D1 Ford Canbox

Wire Harnesses Connection

LINKSWELL-Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-2

  • ① XC01-N0332-A5 F150 Power cable
  • ⑯ XC11-W0016-A0 Wifi cable
  • ⑦ XC01-N0404-A0 Cam Input
  • ⑫ XC01-N0451-A0 Spdif Output Cable
  • ⑮ XC01-N0403-A0 DVR cable
  • ③ XC01-N0336-A1 8P USB cable
  • ⑤ XC01-N0328-A5 RCA Audio Output
  • ④ XC01-N0417-A0 10P USB cable
  • ⑥ XC01-N0320-A0 AUX In
  • ⑧ XC11-W0012-A0 GPS
  • ⑭ XC01-N0323-A1 Radio Ant cable
  • ⑩ ⑪ XC11-W0017-A0 4G Ant Cable

Home Page

  • Long press and customize the homepage apps
  • Slide the screen to the Apps list page

Radio

FM/AM

MP3

LINKSWELL-Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-6

Video

LINKSWELL-Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-7

EQ

LINKSWELL-Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-8LINKSWELL-
Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-9

BlueTooth

LINKSWELL-Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-11

Wireless / WiredCarplay Wireless / Wired Android auto

  • Paired the bluetooth and Connect to the Wifi first,then tap “CarAuto” to do the wireless carplay

LINKSWELL-Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-13

Climate Control

System Setting

LINKSWELL-Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-15LINKSWELL-
Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-18LINKSWELL-
Ford-F150-LITE-T-Style-Super-Duty-Generation-5-Radio-
FIG-19

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals