SelectBlinds Urban Series Dual ‘Zebra’ Solar Window Shades Installation Guide
- June 12, 2024
- SelectBlinds
Table of Contents
SelectBlinds Urban Series Dual ‘Zebra’ Solar Window Shades Installation
Guide
Fitting the brackets
- Use the front two holes in the top of the bracket to fix to the lintel (the ‘ceiling’ of the recess).
- Use two screws through the back plate to mount onto a facing surface (a wall or window frame)
- Note that the position of the outermost brackets should be at least 5cm away from the ends of the rail, with any other brackets evenly distributed across the width.
Fitting the shade
Remote BF-305A
Programming Instructions
-
Adjust switch on BY or BF working mode
BATTERY
BY mode: Short press UP or DOWN button motor in jog rotating, long press UP or DOWN button over 2 seconds motor will rolling up or down continuously.
BF mode: Short press UP or DOWN button motor will rolling UP or DOWN continuously -
Select the Channel for Programming:
Press “CHANNEL+” or “CHANNEL-” to choose the channel until the LED bright on the channel you want. -
Programming this channel on the Motor or Receiver:
Let the motor or receiver under the programming state ( operating according.to the instructions of the motor or receiver) -
Then press the CONFIRM key on the remote ( do it in 6 seconds after the motor under the programming state), the motor jogs, beeps or the receiver beeps to confirm the
programming succeed.
FIY: The group channel will be recorded on the motor automatically when the single channel has been programmed on the motor.