Challenger Lifts EAK0361V64A-US CL Rechargeable Light Bar Kit Instruction Manual

Table of Contents

Product Name: Rotating Rechargeable Lift Light
Part Number: EAK0361V64A-US
Lumen: 1000
Description: The Rotating Rechargeable Lift Light is a powerful light with a brightness output of 1000 lumens. It features a built-in motion sensor that automatically turns on the light when it detects people movements in the working area.

Specifications:

Power Requirement: AC100~240V 50/60Hz
Operating Voltage: 5V/2A
Battery Specification: 3.7V Li-ion 10400mAh
Charging Time: Approximately 5 hours
Run Time: Approximately 6 hours (High brightness), Approximately 50 hours (Low brightness)
Lumens: Approximately 1000 Lumens (High brightness), Approximately 100 Lumens (Low brightness)

Lighting Switch

Motion Sensor Switch

Magnetic Switch:

Battery treatment / charging:

Battery Indicator:

Charging: Green LED flashes when charging, Green LED solid when charging is complete.
Discharging: Green (>90%), Yellow (89%-16%), Red (<16%)

1000 Lumen rotation rechargeable lift light.
Built-in motion sensor, when detect people movements in working area, light will automatically turn on. Light will automatically turn off within one minute if people left working area.
360° Rotation base with strong magnets offers the ultimate in flexible positioning.
Individual switches for magnetically ON/OFF, easy to install and remove the light
On board battery fuel gauge easily informs you how much power is remaining.
Dimmable switch with memory function, press and hold switch to activate.
Recharge using the bi-directional USB-C connection.

Power Requirement: AC100~240V 50 / 60Hz
Operating Voltage: 5V / 2A
Battery Specification: 3.7V Li-ion 10400mAh
Charging Time: Approximately 5 hours
Run Time: Approximately 6 hours (High brightness) Approximately 50 hours (Low brightness)
Lumens:
- Approximately 1000 Lumens ( High brightness )
- Approximately 100 Lumens (Low brightness)

Please keep the lens clear and uncovered to avoid damage.

Lighting Switch:
- Press the switch once to turn on the light. Hold the switch to adjust. the brightness output, the light will flash once when the highest or lowest output is reached.
- Press the switch a second time to turn off the light.
Motion Sensor Switch:
- Press the switch once to activate motion sensor function, and indicator in blue.
- Press the switch a second time to turn off motion sensor, blue indicator shuts off.
Magnetic Switch
- Twist the switch to ON, magnetic turns on.
- Twist the switch to OFF, magnetic turns off.

Charge the battery for at least 8 hours before first use.
Battery indicator:
- Charging: Green LED flash when charging; Green LED solid when charging complete
- Discharging: Green>90%; Yellow: 89%-16%，Red:<15%
Battery indicator will shut off after 15 seconds.
Do not leave the battery in full discharged condition.
Recharge the light at least once in every 30 days.
Only use recommended attachments to charge the light, others may result in a risk of fire, electric shock or personal injury.
Do not charge the light in rain, flame or wet locations.
Always unplug charger before cleaning or maintenance.

EAK0361V67A-US – 5V 2A USB-C Charger & Cable

WARNING

Wear safety goggles. (User and bystander).
Avoid looking directly into the beam.
Do not use the lamp near open flames.
Always fully charge to extend battery life.
The lamp may get hot in the vicinity of the light outlet. Therefore, please maintain a lighting distance at least 10cm.