Tiksounds Q25 TWS Wireless Stereo Headset Instruction Manual

Tiksounds Q25 TWS Wireless Stereo Headset

Packing list

Product Description

1. Indicator light
2. Touch button area
3. Microphone
4. Charge the protection point
5. Charging contact

Charging case description

Wearing schematic

Starting

1. Open the charging bin and take out the two earphones;
2. Tear open the insulation protective film of the charging contacts of the left and right earphones;
3. After charging in the bin for ten minutes, take out the left and right earphones at the same time. After the two earphones leave the charging bin, they will automatically start up. The left and right earphones are automatically paired. After successful pairing, they enter the pairing mode and is prompted “Power on”.
4. Turn on BT of mobile phone or other device and click to search status;
5. Select “Q25” from the search list of mobile phones or other devices and connect. After the connection is successful, the voice is prompted “Connected”. You can now use call and audio on mobile phones or other devices.
6. Cancel the connection voice prompt “Disconnected”.
7. Press the touch keypad of the left earphone or the right earphone for 4 seconds, and the voice prompts “Power off”.

Remarks:

1. After the earphone and the device are disconnected beyond the identification distance (20m), they will return to the distance range for automatic return connection;
2. If the earphone is not connected with any device within 6 minutes, it will automatically shut down.
3. In the connected state, the earphone can be turned off and then turned on to automatically connect the last connected device.
4. When the earphone is in use, put in the charging bin and close the cover to automatically shut down and enter the charging mode.

Binaural/monaural switching:

1. After the earphones are connected with the device, the signal receives a double transmission mode, and the two earphones are not divided into main and auxiliary parts;
2. During the pairing and use of the two earphones, either earphone can be turned off without cutting off the use status of the other earphone;
3. After any earphone is turned on, it will automatically connect the previously connected device.

Pairing Method:

1. Open the upper cover of the charging bin, the earphones enter automatic pairing, and the blue lights of the two earphones flash slowly after successful pairing;
2. In case of earphone crash and mismatch, put the earphone into the charging bin and close the cover, and the earphone will be automatically reset.

Key Actions

Turn on the charging bin lighting mode:

1. Put the earphone into the charging bin and start charging after closing the cover. At the same time, the battery power of the charging bin will be detected. When the earphone is not fully charged, the charging status light turns on the red, and when the earphone is fully charged, the light goes out.
2. When the charging bin is charged with the charging line, the charging status and electric quantity will be displayed.

The lighting mode of the charging bin is as follows:

Indicator status

Note:

1. In order to ensure smooth connection, it is recommended that the distance between mobile phone and earphone should be within 20 meters (barrier-free);
2. If the mobile phone cannot search for the wireless device, remove all paired data stored in the mobile phone and search for the device again;
3. If there is stuck when talking or listening to songs, or if there if is a crash or the earphone is connected to the mobile phone but there is no sound when playing music, put the earphone into the charging bin and closed the cover.
4. Only one earphone has sound. Reorganize the two earphones. (Delete the pairing in the phone first, then put the two earphones in the charging bin and close the cover. Take it out when the red light is on, and wait for 15 seconds before the blue light flashes state)
5. If the charging is wrong or cannot be charged, check whether the charging line is connected correctly or whether the earphone is installed, and put it back into the charging position.
6. This product uses a built in non-detachable battery. Please do not try to take the battery out of the earphone to avoid damaging the earphone.
7. When you do not use earphones and charging compartments for a long time, please place them in a dry and ventilated place and charge them once a month.

Safety Notes:

1. Do not use earphones in thunderstorm weather, which may lead to abnormal operation of earphones and increase the risk of electric shock.
2. It is suggested that the volume of ear use should be increased slowly from small to large, and the appropriate volume should be selected to avoid damage to ear hearing.
3. Please place earphones and packaging boxes in places that are not easily accessible to children to avoid accidents.
4. Earphones are not suitable for operation in high temperatures or humid environments;
5. Do not use any corrosive or abrasive detergent to clean earphones.
6. In order to reduce the pollution to the earth, please recycle it by a professional organization when it is discarded.
7. The battery is flammable and explosive. Please do not disassemble it without authorization or put it into the fire, which will lead to explosion risk.
8. Please do not disassemble the earphone by yourself.

Maintenance Service Card

Dear users, this warranty card is the certificate of the product’s three guarantees. Please cooperate with the dealer to fill in it and keep it properly, thank you.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>