HITACHI CSNET Lite Air Conditioning SAS Instruction Manual
- June 12, 2024
- Hitachi
Table of Contents
Original version
INSTRUCTION MANUAL
CSNET
Lite
CSNET Lite Air Conditioning SAS
Specifications in this manual are subject to change without notice in order
that HITACHI may bring the latest innovations to their customers. Whilst every
effort is made to ensure that all specifications are correct, printing errors
are beyond HI-TACHI’s control; HITACHI cannot be held responsible for these
errors.
CAUTION
** This product shall not be mixed with general house waste at the end of
its life and it shall be retired according to the appropriated local or
national regulations in a environmentally correct way. Contact to the
corresponding authorities for more information.
DANGER – Hazards or unsafe practices which COULD result in severe personal
injuries or death.
CAUTION — Hazards or unsafe practices which COULD result in minor
personal injury or product or property damage.
NOTE** — The text following this symbol contains information or
instructions that may be of use or that require a more thorough explanation.
The English version is the original one; other languages are translated from
English. Should any discrepancy occur between the English and the translated
versions, the English version shall prevail.
SAFETY SUMMARY
HITACHI cannot anticipate every possible circumstance that might involve a
potential hazard.
IMPORTANT NOTE
Read carefully the document PMML0505 inside the USB Pen Drive Memory before
performing the installation work.
DANGER
- Do not install CSNET Lite unit outdoors.
- Do not install this device in places accessible to the general public. Install it in enclosures or other places which are accessible only by the usage of a tool.
- Do not connect power supply before the device installation is correctly done. Always disconnect power supply from the device before any maintenance or servicing action.
CAUTION
- This appliance must be used only by adult and capable people, having received the technical in- formation or instructions to handle properly and safely this appliance.
- Children should be supervised to ensure that they do not play with the appliance.
- Install the device inside an enclosure over a 35 mm DIN rail. The device power supplier must be a fixed installed wiring with an additional circuit breaker for power switch ON/OFF when required.
Item | Notes |
---|---|
CB | Circuit Breaker 5A |
Cable | 2 x 0.75 (1) |
NOTE
- Power cable type cannot be lighter than the (mm)
FACTORY-SUPPLIED COMPONENTS
ITEM | QUANTITY | IMAGE |
---|---|---|
CSNET Lite | 1 | |
Instruction Sheet | 1 | |
USB Memory | 1 | |
ETHERNET Cable | 1 |
INSTALLATION
CAUTION
- Disregarding the safety and assembly instructions may result in the falling of and / or damage to your electrical appliance. Opening the package represents your undertaking to closely read and follow the instructions. This device is not intended for use in public places.
- Local or national regulations must be followed at all times during the preliminary work to prepare the electric power line for the equipment.
NOTE
For further information consult the current regulations in the country where
the unit is to be installed.
3.1 CONNECTORS DESCRIPTION
No. | Description |
---|---|
1 | Power supply |
2 | RJ45 Ethernet |
3 | USB for log |
4 | Push button |
5 | RS485 for Modbus RTU |
6 | DSW for device configuration |
7 | H LINK comunication |
8 | Inputs |
9 | Ouputs |
10 | LEDs for operation indication |
11 | USB at configuration time only |
3.2 START UP PROCESS
- Connect the device to the network using a LAN cable.
- Turn the device On.
- There are two ways to interface with the device:
a. Direct Connection:
i. Connect PC to CSNET Lite using USB cable (supplied with
ii.Use CSNET Lite configuration tool to connect to CSNET Lite (supplied with configuration kit).
C-Sh7L.0 co noguraisan toot
iii. Select communication port and click connect .
iv. Configure network as DHCP: it is necessary to give a hostname. This hostname is given by the customer IT service.
v. Configure network as static IP: it is necessary to fill IP, Mask and Gateway fields. This information is given by the customer IT service.
NOTE Any changes may require some time to be updated by network server.
IP field gives information about configuration state.
b. Remote Connection:
i. Use a computer connected to the same network as the device.
ii.Open the address https://192.168.0.6 in a web browser.
PMML0503 rev.0 – 05/2019
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>