Air Unit Firmware Update Instructions
- June 12, 2024
- ST
Table of Contents
Air Unit Firmware Update
Download the STM32Cube programmer from this page
Download the STM32Cube programmer from this page
Run SetupSTM32CubeProgrammer_win64.exe and continue with all the default
options.
Insert the USB.
Instructions for use
Make sure the Air Unit is not connected to power and connect it to your
computer via a USB-USB cable (if your Air Unit has a mini-usb port, please
connect it using a USB-miniUSB cable instead).
Open STM32CubeProgrammer, it should have an icon on the Desktop Click the blue button left of “Connect” and select USB
There should be one device, USB1
Click “Connect”, it should connect and display the contents of the controller Click “Open File” (screen 9) and select the .hex file
The .hex should be loaded now and you can press “Download” (screen 10)
It should only take a few seconds to complete
Remove the USB and connect a MOBY device. Navigate to the menu -> system information to validate the AirUnit’s firmware version.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>