TELLUR TLL331521 WiFi Smart Power Strip User Guide

TELLUR TLL331521 WiFi Smart Power Strip

Thank you for choosing Tellur products!
To ensure optimum performance and safety, please read this user manual carefully before using the product. Keep this user manual safe for future reference.

GENERAL SAFETY INFORMATION

WARNINGS

• Make sure the power strip is easily accessible and not covered.
• This product is designed to be used inside buildings.
• Avoid hitting, bumping, or dropping the product, it can damage the electronic components.
• Make sure that the devices connected do not exceed the maximum operating output of the plug (2500W, 1 0A max)
• Do not use this product in damp environment and protect is from dirt, moisture, or splashes of liquids.
• Respect the technical specifications of the product and do not use it outside the declared operating parameters.
• Disconnect the product from the power supply before cleaning (use only soft cloths or cleaners).

ATTENTION

• To avoid wire damage or abrasion, do not expose the wire to edges of metal or other sharp objects.
• Don’t use the product if it is damaged in any way, shape, or form.
• Don’t attempt to repair, disassemble, or modify this product.
• Don’t place the product near any heat source or in direct sunlight.
• If you don’t use the device for a long time, disconnect it from the power supply.

NOTES

• The Smart wall plug is designed only for single-pole installation use and will require Neutral and Ground wires.
• In case of power source cut off, when energy is restored, the power strip can be set in APP to remain ON, OFF or remember last state.
• Like all electrical products, please keep the device out of reach of children.

IMPORTANT NOTESABOUTWIFI SMART CONTROL WITH TELLUR SMART APP

• Make sure you have an active 2.4GHz Wi-Fi internet network, and you have access to Wi-Fi password.
• This device is compatible with 2.4GHz Wi-Fi networks only. 5GHz Wi-Fi is not supported. If you don’t have 2.4GHz Wi-Fi network available, check the router settings, contact a specialized technician or the internet provider for support.
• The app does not support Wi-Fi 6 networks with 802.11 ax standard. Please set the 2.4GHz Wi-Fi network to 802.11 b/g/n.
• No special gateway or HUB is required to remotely control. the product via Wi-Fi.
• Wi-Fi passwords should not include special characters such as-! @#$%A&*().
• Make sure your Wi-Fi internet is stable and the signal is strong enough in the installation location.

PRODUCT OVERVIEW

PRODUCT DIAGRAM

1. Master switch button
2. Type-C PD30W max port
3. USB QC 3.0 18W max port
4. 2 x Smart Auto ID USB ports
5. 3 x Schuko AC power sockets

MAIN FUNCTIONS

• Safe, strong, and reliable construction. 2500W 1 DA (Max) AC output.
• Additional Type-C (PD30W) & USB-A (QC 3.0 18W) and 2 x USB Auto ID USB charging ports.
• Remote Control via the Internet, using Tellur Smart APP
• 3 x Schuko sockets and individual control possibilities, this power strip gives you complete control over your power supply.
• Voice Control Through Alexa, Google, Siri Shortcuts
• Time-of-use scheduling and automation
• Power failure protection. Set the status of the power strip when the power comes back on, giving you full control over your power supply.
• Equipped with a child protection function that can be activated from the app, ensuring that the on/off button is protected from accidental touch.

IN THE BOX

• Wi-Fi Smart Power Strip
• Installation guide and operation instructions

NOTES:  For full technical specifications please check chapter 9.

PRODUCT INSTALLATION

PREPARATIONS AND CHECKS BEFORE INSTALLATION

• Make sure that the devices connected do not exceed the maximum operating output of the plug (2500W, 1 QA max)
• Make sure the power strip is easily accessible and not covered.
• This product is designed to be used inside buildings.
• Respect the technical specifications of the product and do not use it outside the declared operating parameters.

INSTALLATION

• Make sure the connection to the power supply is firm and secure.
• Plug in the power strip and check if the manual button works properly (ON/OFF)
• Check the LED light and continue with APP pairing using Tellur Smart APP.

NOTES

1. Initial LED Indicator status:
   • Main button Only White Light ON – the power strip is turned OFF
   • Main buton White Light and output ports White Light ON – the power strip is turned ON
   • Red/White blinking Light – the power strip is in pairing mode.
2. For Troubleshooting please check chapter 8

PAIRING THE DEVICE WITH TELLUR SMART APP

ATTENTION

• This device only supports a 2.4GHz frequency band router, does not support a 5GHz frequency band router.
• Make sure your phone is connected to the 2.4GHz wireless network and you have access to Wi-Fi password before you start the pairing procedure.
• The app doesn’t support Wi-Fi 6 networks with 802.11 ax standard. Please set the 2.4GHz Wi-Fi network to 802.11 b/g/n
• Wi-Fi passwords should not include special characters such as _, @#$%’&*!).
• Make sure the Wi-Fi signal is strong enough in the area where the device will be installed.

DOWNLOAD AND INSTALL THE TELLUR SMART APP

• Available for either iOS or Android devices.

CREATE AN ACCOUNT

• Once downloaded, the app will ask you to create an account (if you don’t have any already]. Enter your email, select the country you live in and create a password for your Tellur Smart account.

PRODUCT PAIRING

• We recommend having the Bluetooth function of the smartphone activated for easier pairing.
• Open the Tellur Smart app and click “Add device”or”+” and then select “Electrical Engineering··-> ··Power Strip (Wi-Fi)”.
• Power on the plug and wait until the Wi-Fi LED is flashing quickly in White-Red color.
• If the LED doesn”t flash, long-press the manual switch button for about 5-8 seconds.
• Select the Wi-Fi network, input your Wi-Fi password and click “Next”.
• Confirm the LED is flashing quickly in the app interface.
• Wait for the device to be added automatically. Tap ··oone·· when finished and the device will appear in your list.

NOTES: For Troubleshooting please check chapter 8.

TELLUR SMART APP FEATURES

• Timer and Schedule
  • You can set Countdowns, Schedule, Random, and other automatizations.
• Smart
  • Create various automations and scenarios using weather changes, other devices behavior or schedules
• Settings
  • You can share the device with others, check for firmware updates, rename, remove device, get notification if the device becomes offline.

Additional functions

• Relay Status:  You can set the status of plug after restoring the electric supply [ON/OFF/Remember last status)
• Light Mode:  You can change the LED behavior [completely turned OFF, ON etc …. )
• Child Lock: When activated it will need 4 consecutive presses of the power button to activate the plug.

AMAZON ALEXA INTEGRATION

NOTE:  A smart display compatible with Amazon Alexa is needed for a live preview of the doorbell’s camera.

1. Go to Home menu on Alexa app.
2. Select “Skills”/ “Skills & Games”.
3. Type Tellur Smart in the search bar.
4. Select Tellur Smart and click “Enable” to activate Tellur Smart.
5. Enter your Tellur Smart account and password. Now you have finished the integration with Alexa.
   • Tellur Smart app is now skilled with Alexa, and you can vocally control the devices added in Tellur Smart.
   • Remember:  if you rename your smart devices, use a simple name that Alexa can recognize.

To control your smart devices through Alexa, use simple and concise voice commands. Here is an example for bedroom lighting:

• “Alexa, turn off bedroom light”
• “Alexa, turn on bedroom light”
• “Alexa, dim bedroom light”
• “Alexa, set bedroom light to red”

GOOGLE ASSISTANT INTEGRATION

NOTE:  A smart display compatible with Google Home is needed for a live preview of the doorbell camera.

Before using Google Home to control your devices, make sure you meet the following conditions:

• You have a Google Home device or an Android device with Google Assistant.
• You have the newest version of Google Home app.
• You have the newest version of Google app (Android only).
• The device display language is set to English US.
• You have the Tellur Smart app and a related account.
• Add devices in Tellur Smart app (refer to app instructions) – you can skip this part if you have already added some devices to your Tellur Smart account. Make sure your devices’ names are easily recognizable.

Link account in Home Control

1. Go to Google Home’s homepage and tap “+”
2. Hit the “Add new” button, enter Tellur Smart in the search bar, and select the app from the list. Next, select your Tellur Smart account’s region, enter your Tellur Smart account and password, and tap “Link now”. After you assign rooms for devices, your devices will be listed in the Home Control page.

Now you can control your smart devices through Google Home. Take bedroom light as example – the supported voice commands are as below:

• Ok Google, turn on/off bedroom light.
• Ok Google, set bedroom light to 50 percent.
• Ok Google, brighten bedroom light.
• Ok Google, dim bedroom light.
• Ok Google, set bedroom light to red.

TROUBLESHOOTING

• Make sure the device is powered on and the connection to the power supply is good.
• Check the Wi-Fi connection of your phone.
• Check if the device is in pairing mode. Reset your smart device tc enter pairing mode.
• Check router or related: If you use a dual-band router, select the 2.4GHz network to add the device. You also need to enable the (router’s broadcasting function. Set encryption method as WPA2-PSK and authorization type as AES or set both on “auto”.
• Check if the Wi-Fi signal is strong enough. To maintain the signal strong, keep your router and the smart device as close as possible
• Wireless mode should be 802.11.b/g/n (Wi-Fi 6 protocol 802.11ax is not supported)
• Make sure you don’t exceed the maximum number of registered devices supported by the app (150).
• Check if the router’s MAC filtering function is enabled. If so, remove the device from the filter list and make sure the router is not prohibiting the device connection.
• Make sure the Wi-Fi password entered in the app is correct.

Can I control the device with 3G/4G/5G network?

• When adding the device for the first time, the device and the phone need to be connected to the same Wi-Fi network.
• Once the device has been successfully paired with the Tellur Smart app, you can remotely control it via 3G/4G/5G networks.

How can I share my device with my family?

• Open Tellur Smart app, go to “Profile”-> “Device sharing”-> “Sharing sent”, tap “Add sharing” and share the device with the added family members.
• Notice – users must install the Tellur Smart app on their device to see shared devices.

How can I manage the devices shared by others?

• Open App, go to “Profile”> “Device Sharing”> “Sharing Received”, then you can find the devices shared by other users. To delete a shared device, swipe left.

TECHNICAL SPECIFICATIONS

Disposal and recycling information

The crossed-out wheeled bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of electrical and electronic equipment waste (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure EEE waste is recycled in a manner that conserves valuable materials and protects human health and the environment. Improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and the environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>