Elektroimport ren AS Powersocket 2xUSB-C lader 35W Hvit Instruction Manual

Table of Contents

This USB Smart Charging Socket is designed for indoor use only.
It is recommended to have a qualified electrician install this socket for safety reasons.
The socket has a maximum total output power of 35W.
The socket features a single USB output PD (Power Delivery) with the following specifications:
- Input: 100-240V~ 50/60Hz 1.0A Max
- Output: 5VDC/3A, 9VDC/3A, 12VDC/2.91A, 15VDC/2.33A, 20VDC/1.75A
The IP-Class of the socket is IP20, indicating its protection against solid objects greater than 12mm and no protection against water.

Note: Please ensure the power supply is switched off before proceeding with the installation.

Ensure you have a standard case with a minimum depth of 40MM for the installation of the wall USB charging socket.
Contact a qualified electrician to handle the installation process for safety purposes.
Follow the provided installation wiring diagram to correctly wire the charging socket.
Make sure to use screw terminals with a capacity of 1.5-2.5mm2 for proper electrical connections.
Once the socket is installed, you can connect your devices to the USB output for charging.
Ensure the power supply is switched on and the socket is receiving power before connecting your devices.
Refer to the technical parameters to understand the maximum output capabilities of the USB charging socket.

USB Smart Charging Socket Installation Instructions

Warning: For your safety, it is recommended to have a qualified electrician install this socket. This socket is designed for indoor use only.

The USB Smart Charging Socket is equipped with an intelligent control chip that can identify the charging modes of different digital devices and automatically switch to the appropriate charging mode. When the device is charging at full speed, the display screen will show the output power in real time. (The output power is continuously detected within 0.5W within 10 minutes, and the screen will remain bright when charging beyond 4W).
For example , when an iPhone is plugged into the charging socket, the smart chip sends out a detection signal. When it detects that the charging mode of the device is Apple mode, the charger will automatically switch to Apple charging mode for full-speed charging. The smart detection charging mode is also used when charging other devices, and it will automatically adjust to the best charging mode

Input: 100-240V~ 50/60Hz 1.0A Max
Output: Single USB output PD Max 35W
The maximum total output power of both ports is 35W 5VDC/3A 9VDC/3A 12VDC/2.91A 15VDC/2.33A 20VDC/1.75A
IP-Class : IP20

The wall USB charging socket can be installed in a standard case with a depth of 40MM or greater.
Screw terminal capacity: 1.5-2.5mm.

Read User Manual Online (PDF format)