hager EHN010 Daily Time Switch Instruction Manual

: June 13, 2024
: hager

Table of Contents

hager EHN010 Daily Time Switch
INSTALLATION INSTRUCTIONS
Safety instructions
Functional description
Design and layout of the device
Installation and electrical connection
Setting
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hager EHN010 Daily Time Switch

INSTALLATION INSTRUCTIONS

hager-EHN010-Daily-Time-Switch-FIG-1 hager-
EHN010-Daily-Time-Switch-FIG-2

Safety instructions

Electrical equipment may only be installed and assembled by a qualified electrician in accordance with the relevant installation standards, regulations, directives and safety and accident prevention directives of the country. Failure to comply with these installation instructions may result in damage to the device, fire or other hazards.

Functional description

analogue time switch
1 channel
daily program
with power reserve (only EHN011)

Correct use

For lighting, ventilators, fountains, advertising, etc. in closed, dry rooms
Mounting on DIN rail TH 35 – 7,5 (according to DIN EN 60715)
Switching of any exterior conductor is permitted, switching of SELV is not permitted

Design and layout of the device

Marking to read off the current time
Switching disk to display the switching times
Switching segments, each 15’
Switch for operating mode:
= Auto/ 1 = Continuous ON/0 = Continuous OFF

Installation and electrical connection

Warning!
Electrical shock when live parts are touched! An electric shock can lead to death!

Isolate all power before working on the device and cover any live parts in the area!
Snap the device onto the DIN rail (Figure 02).
Connect according to wiring diagram (Figure 03).
Switch the miniature circuit breaker on again.

Setting

Setting the current time: Turn the switching disk (2) upwards (Figure 05).
Define the switching times of the switching segments (3) by pushing down to the right (ON) or pushing up to the left (OFF) (Figure 06).
Select operating mode (Figure 08)
= Auto/ 1 = Continuous ON/0 = Continuous OFF

Technical data

Operating voltage…………… 230 V~, +10 %/-15 % 240 V~, ± 6%

Frequency

EHN011………………………………………50 – 60 Hz
EHN010……………………………………………. 50 Hz
Cycle………………………………………………..24 hours
Shortest switching time……………………15 minutes

Own consumption

EHN010………………………………………………. 1 W
EHN011……………………………………………. 0.5 W
Switching capacity………………. 16 A, 250 V~, AC1 4 A, 250 V~, cos ϕ = 0.6
Switching capacity min……………..24 V~ / 100 mA LED lamps:
≤ 2 W…………………………………. 30 W (15 x 2 W)
2 W……………………………… 300 W (20 x 15 W)
Incandescent/halogen lamps……………….. 1000 W
Fluorescent lamps (electronic ballast)…………….. 600 W (10 x 58 W)

Fluorescent lamps

With ballast…………………… 600 VA (max. 70 μF)
Without ballast……………………………….. 1000 VA
Compact fluorescent lamps…………………… 150 W

Power reserve

EHN010…………………………………………..without
EHN011…………………………………..120 h (230 V)
Accuracy rate max……………………………..± 1 s/day
Conductor cross-section……………………1 – 6 mm²
Miniature circuit breaker…………………………… 16 A
Contact………………………….Normally open contact
Opening width……………………………….. < 3 mm (μ)
Protection class…………………………………………….II
Degree of protection……………………………….. IP 20

Operating temperature:

EHN010……………………………… –20 °C – +50 °C
EHN011……………………………… –10 °C – +50 °C
Storage temperature………………… –25 °C – +70 °C
Width…………………………………….. 17.5 mm / 1 PU
Rated surge voltage………………………………….4 kV
Mounting / operating height………………. < 2000 m

Mode of action:

EHN010………………………………………….1 BRTU
EHN011…………………………………………. 1 BSTU
Contamination level……………………………………….2

Correct disposal of this product
(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems). The identification shown on the product or its documentation indicates that it should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health, please separate this device from other types of waste. This helps you to promote the sustainable reuse of material resources. Private consumers are asked to contact the dealer from whom they purchased the product, or their municipal administration, to obtain information on how to dispose the product in an environmentally- friendly manner. Commercial consumers are asked to contact their suppliers and to check the general terms and conditions of business of the purchasing agreement. This product should not be mixed with other commercial waste for disposal.