hager K14xD Brass Terminal Instruction Manual
- June 13, 2024
- hager
Table of Contents
hager K14xD Brass Terminal
Product Information
- Product Name: 6LE008262A
- Manufacturer: Hager Electro GmbH & Co. KG
- Model Numbers: KM06x, KM07x, KM08x, KM10x, KM11x, KM13x, KM14x, KM17x, KM22x, KM25x
Product Usage Instructions
- Ensure that the installation and assembly of the product are done in accordance with the installation standards, guidelines, and regulations of your country.
- To ensure a high level of operation safety, the electrical panels must be regularly inspected by a qualified electrician to check their condition.
- The conductors should be securely fastened to the terminals to avoid the risk of fire due to loose conductors.
- Use conductors with the correct cross-section specified for the product.
- Cut the conductors to the required length and insert them flush with the terminal.
- Tighten the screws to the required torque using a torque wrench.
- These usage instructions are an integral part of the product and should be retained by the end user.
For any safety concerns or issues, consult a qualified electrician or contact the manufacturer.
Product Overview
Safety information
Electrical devices may only be installed and assembled by a qualified
electrician in accordance with the relevant installa-tion standards,
guidelines, regulations, directives, safety and accident prevention
regulations of the country.
In order to ensure a high level of operation-al safety, switchgear
combinations must be regularly checked by a qualified electrician to ensure
that they are in good condition.
These instructions are an integral compo-nent of the product and must be
retained by the end user.
Danger
Risk of fire due to loose conductors. Conductors that are not sufficiently
secured or that come loose in the terminal can heat up during opera-tion and
cause arcing.
- Use only permitted conductor types with the correct cross section.
- Strip the conductor ends to the specified length and insert them flush with the terminal.
- Connect a maximum of one con-ductor per terminal connection.
- Securely screw on the conductor to the required torque.
T +49 6842 945 0 F +49 6842 945 4625 info@hager.com hager.com – 06.2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>